FCC ID 2BCTP-14KREVO
Desktop 3D Printer
by PHROZEN TECH CO.,LTD.
Grantee Code: 2BCTP Product Code: 14KREVO
Latest application date: 2024-04-24
FCC ID Device Details
| FCC ID | 2BCTP-14KREVO |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BCTP |
| Product Code | 14KREVO |
| Applicant Business | PHROZEN TECH CO.,LTD. 🇹🇼 |
| Related Domains |  fnt-cert.com |
| Equipment Class | Desktop 3D Printer |
| Test Firm | BTF Testing Lab (Shenzhen) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2024-04-24 |
| 5180-5240 MHz | Original Equipment | 2024-04-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-04-24 | PDF 5.4 MB |
| Internal Photos | Internal Photos | 2024-04-24 | PDF 1.7 MB |
| External Photos | External Photos | 2024-04-24 | PDF 687.6 KB |
| label | ID Label/Location Info | 2024-04-24 | PDF 262.9 KB |
| label | ID Label/Location Info | 2024-04-24 | PDF 46.4 KB |
| test photo | Test Setup Photos | 2024-04-24 | PDF 620.6 KB |
| Antenna specification | Test Report | 2024-04-24 | PDF 363.9 KB |
| test report | Test Report | 2024-04-24 | PDF 4.2 MB |
| test report | Test Report | 2024-04-24 | PDF 4.4 MB |
| 2.911d 5 i Certification Equipment Type | Attestation Statements | 2024-04-24 | PDF 565 KB |
| 2.911d 5 ii Certificiation Applicant | Attestation Statements | 2024-04-24 | PDF 549.3 KB |
| US Agent for Service Process | Attestation Statements | 2024-04-24 | PDF 567.8 KB |
| Agent Authorization | Cover Letter(s) | 2024-04-24 | PDF 233.6 KB |
| FCC Short Long Term Confidentiality Request | Cover Letter(s) | 2024-04-24 | PDF 130.8 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2024-04-24 | PDF 121.2 KB |
| RF exposure report | RF Exposure Info | 2024-04-24 | PDF 249.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 107.3 KB | |
| Schematic Metadata only | Schematics | PDF 820 KB | |
| Operation Description Metadata only | Operational Description | PDF 418.3 KB | |
| SOFTWARE SECURITY REQUIREMENT SFORU-NIIDEVICES Metadata only | SDR Software/Security Info. | PDF 663.1 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 458.4 KB |
Application Information
| Application ID | N30HEKvPqI96IZGSOmQ4Yg== |
|---|---|
| Final Action Date | 2024-04-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0034226605 |
| Model | 14KREVO |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Desktop 3D Printer |
| Responsible Party | Amy hua, Amy.hua@fnt-cert.com , 18680366830 |
| Technical Contact | PHROZEN TECH CO.,LTD., Amy.hua@fnt-cert.com |
| Test Firm | Ryan CJ, BTF Testing Lab (Shenzhen) Co., Ltd., Ryan.cj@btf-lab.com  , +86-755-23146130 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| N30HEKvPqI96IZGSOmQ4Yg== | 2024-04-24 | Original Equipment |
| A6YheMprRztzn3REQnU50g== | 2024-04-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application N30HEKvPqI96IZGSOmQ4Yg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/24/2024 Application Dated: 04/24/2024 |
| PHROZEN TECH CO.,LTD. |
| 3F.,NO287,NIUPU RD.,XIANGSHAN DIST., |
| HSINCHU CITY 30091, Taiwan |
| Attention: Amy hua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCTP-14KREVO |
| Name of Grantee: | PHROZEN TECH CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Desktop 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0185 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application N30HEKvPqI96IZGSOmQ4Yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PHROZEN TECH CO.,LTD. 3F.,NO287,NIUPU RD.,XIANGSHAN DIST., HSINCHU CITY 30091, Taiwan |
Date of Grant: 04/24/2024 Application Dated: 04/24/2024 |
| Attention: Amy hua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCTP-14KREVO |
| Name of Grantee: | PHROZEN TECH CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Desktop 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0185 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/24/2024 Application Dated: 04/24/2024 |
| PHROZEN TECH CO.,LTD. |
| 3F.,NO287,NIUPU RD.,XIANGSHAN DIST., |
| HSINCHU CITY 30091, Taiwan |
| Attention: Amy hua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCTP-14KREVO |
| Name of Grantee: | PHROZEN TECH CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Desktop 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0133 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application A6YheMprRztzn3REQnU50g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
PHROZEN TECH CO.,LTD. 3F.,NO287,NIUPU RD.,XIANGSHAN DIST., HSINCHU CITY 30091, Taiwan |
Date of Grant: 04/24/2024 Application Dated: 04/24/2024 |
| Attention: Amy hua |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BCTP-14KREVO |
| Name of Grantee: | PHROZEN TECH CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Desktop 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0133 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |