FCC ID 2BD76-X2
Body Worn Camera
by Wrap Technologies, Inc. (Wrap Intrensic)
Grantee Code: 2BD76 Product Code: X2
Latest application date: 2024-01-05
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2024-01-05 |
| 2402-2480 MHz | Original Equipment | 2024-01-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-01-05 | PDF 3.2 MB |
| Internal Photos | Internal Photos | 2024-01-05 | PDF 4.2 MB |
| External Photo | External Photos | 2024-01-05 | PDF 1.4 MB |
| label | ID Label/Location Info | 2024-01-05 | PDF 71.4 KB |
| Test Setup Photos | Test Setup Photos | 2024-01-05 | PDF 603.7 KB |
| Test Setup Photos SAR | Test Setup Photos | 2024-01-05 | PDF 452.8 KB |
| Antenna test report | Test Report | 2024-01-05 | PDF 264.5 KB |
| FCC BLE Appendix Data | Test Report | 2024-01-05 | PDF 1.6 MB |
| FCC BLE Report Part 15.247 | Test Report | 2024-01-05 | PDF 3.3 MB |
| FCC WIFI Appendix Data | Test Report | 2024-01-05 | PDF 6 MB |
| FCC WIFI Appendix Data | Test Report | 2024-01-05 | PDF 3.2 MB |
| FCC WIFI Report Part 15.247 | Test Report | 2024-01-05 | PDF 2.6 MB |
| FCC WIFI Report Part 15.407 | Test Report | 2024-01-05 | PDF 2.9 MB |
| Test Report SAR | RF Exposure Info | 2024-01-05 | PDF 5.9 MB |
| 2.911_(d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2024-01-05 | PDF 101.6 KB |
| 2.911_(d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2024-01-05 | PDF 93.2 KB |
| 2.911_(d)(7)USA | Attestation Statements | 2024-01-05 | PDF 97.3 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2024-01-05 | PDF 67.9 KB |
| FCC Short_Long Term Confidentiality Request Rev4. | Cover Letter(s) | 2024-01-05 | PDF 69.2 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2024-01-05 | PDF 97.1 KB |
| Block diagram Metadata only | Block Diagram | PDF 94.2 KB | |
| SCH Metadata only | Schematics | PDF 1.8 MB | |
| OP Metadata only | Operational Description | PDF 74.6 KB | |
| SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata only | SDR Software/Security Info. | PDF 164.9 KB |
Application Information
| Application ID | iCWUxoIXIy+kh0YcFEfBRw== |
|---|---|
| Final Action Date | 2024-01-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0034641043 |
| Model | X2 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Body Worn Camera |
| Responsible Party | Matt Campagni, SVP, Operations, support@wrap.com  , 800 583 2652 |
| Technical Contact | Wrap Technologies, Inc. (Wrap Intrensic), support@wrap.com |
| Test Firm | Jeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com  , 13798230942 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.63W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iCWUxoIXIy+kh0YcFEfBRw== | 2024-01-05 | Original Equipment |
| 2EKJepfMZFiY2PSCUWi2vQ== | 2024-01-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application iCWUxoIXIy+kh0YcFEfBRw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Wrap Technologies, Inc. (Wrap Intrensic) |
| 1817 W 4th Street |
| Tempe, AZ 85281 |
| Attention: Matt Campagni , SVP, Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BD76-X2 |
| Name of Grantee: | Wrap Technologies, Inc. (Wrap Intrensic) |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Body Worn Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0226 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0233 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0267 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0241 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.63W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application iCWUxoIXIy+kh0YcFEfBRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wrap Technologies, Inc. (Wrap Intrensic) 1817 W 4th Street Tempe, AZ 85281 United States |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Attention: Matt Campagni , SVP, Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BD76-X2 |
| Name of Grantee: | Wrap Technologies, Inc. (Wrap Intrensic) |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Body Worn Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0226 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0233 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0267 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0241 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.63W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Wrap Technologies, Inc. (Wrap Intrensic) |
| 1817 W 4th Street |
| Tempe, AZ 85281 |
| Attention: Matt Campagni , SVP, Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BD76-X2 |
| Name of Grantee: | Wrap Technologies, Inc. (Wrap Intrensic) |
| Equipment Class: | Digital Transmission System |
| Notes: | Body Worn Camera |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0229 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.57W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2EKJepfMZFiY2PSCUWi2vQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wrap Technologies, Inc. (Wrap Intrensic) 1817 W 4th Street Tempe, AZ 85281 United States |
Date of Grant: 01/05/2024 Application Dated: 01/05/2024 |
| Attention: Matt Campagni , SVP, Operations |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BD76-X2 |
| Name of Grantee: | Wrap Technologies, Inc. (Wrap Intrensic) |
| Equipment Class: | Digital Transmission System |
| Notes: | Body Worn Camera |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0229 |
| Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 0mm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory is 0.57W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |