FCC ID 2BDMD-2HBM2
Automotive Telematics Unit
by 2hire s.r.l.
Grantee Code: 2BDMD Product Code: 2HBM2
Latest application date: 2024-07-04
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-07-04 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESPC3MINI1 Grant Date: 06/16/2021 | 2024-02-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2024-12-31 | PDF 330.6 KB |
| Internal Photos | Internal Photos | 2024-12-31 | PDF 1.1 MB |
| External Photos | External Photos | 2024-12-31 | PDF 307.7 KB |
| External Photos | External Photos | 2024-02-05 | PDF 125.8 KB |
| Label and Label Location | ID Label/Location Info | 2024-07-04 | PDF 284.2 KB |
| Label and Label Location | ID Label/Location Info | 2024-07-04 | PDF 299.7 KB |
| Label and Label Location | ID Label/Location Info | 2024-02-05 | PDF 49.2 KB |
| Label and Label Location | ID Label/Location Info | 2024-02-05 | PDF 130.8 KB |
| Operational Description Metadata only | Operational Description | 2024-07-04 | PDF 152.7 KB |
| Test Setup Photos | Test Setup Photos | 2024-12-31 | PDF 705.3 KB |
| Antenna Details | Test Report | 2024-07-04 | PDF 1.8 MB |
| Test Report | Test Report | 2024-07-04 | PDF 5.4 MB |
| Test Report | Test Report | 2024-07-04 | PDF 1.4 MB |
| Attestation statement | Attestation Statements | 2024-07-04 | PDF 129.6 KB |
| Attestation Statement | Attestation Statements | 2024-02-05 | PDF 82.5 KB |
| Attestation statement | Attestation Statements | 2024-02-05 | PDF 127 KB |
| Cover Letters | Cover Letter(s) | 2024-07-04 | PDF 165.1 KB |
| Cover Letters | Cover Letter(s) | 2024-02-05 | PDF 71 KB |
| Cover Letters | Cover Letter(s) | 2024-02-05 | PDF 84.8 KB |
| RF exposure info | RF Exposure Info | 2024-07-04 | PDF 84.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 215.5 KB | |
| Schematics Metadata only | Schematics | PDF 5 MB | |
| Operational Description | Operational Description | 2024-07-04 | PDF 1.8 MB |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 102.7 KB |
Application Information
| Application ID | INIspkjU3yUNLCIYHW5Nbw== |
|---|---|
| Final Action Date | 2024-07-04 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0034490458 |
| Model | 2HBM2 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Automotive Telematics Unit |
| Responsible Party | Matteo Filippi, m.filippi@2hire.io  , +393332025429 |
| Test Firm | Roberto Giampaglia, Nemko S.p.A., segreteria@nemko.com  , +39 039 220 12 01 |
| TCB Email | jin.xu@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/31/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into host platform with module from Quectel Wireless Solutions EG21-G and antennas as described in this filing. WiFi mode has been disabled in the module. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 22 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| INIspkjU3yUNLCIYHW5Nbw== | 2024-07-04 | Class II permissive change or modification of presently authorized equipment |
| DoBQm4nnliMUp8D0BeHqrA== | 2024-02-05 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESPC3MINI1 Grant Date: 06/16/2021 |
Equipment Authorization
Grants
TCB Grant - Application INIspkjU3yUNLCIYHW5Nbw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/04/2024 Application Dated: 07/04/2024 |
| 2hire s.r.l. |
| Via Mantova 52 |
| Roma, 00198 Italy |
| Attention: Matteo Filippi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BDMD-2HBM2 |
| Name of Grantee: | 2hire s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Automotive Telematics Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to integrate this module into host platform with module from Quectel Wireless Solutions EG21-G and antennas as described in this filing. WiFi mode has been disabled in the module. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 22 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations |
EAS Grant - Application INIspkjU3yUNLCIYHW5Nbw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
2hire s.r.l. Via Mantova 52 Roma, 00198 Italy |
Date of Grant: 07/04/2024 Application Dated: 07/04/2024 |
| Attention: Matteo Filippi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BDMD-2HBM2 |
| Name of Grantee: | 2hire s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Automotive Telematics Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Class II Permissive Change to integrate this module into host platform with module from Quectel Wireless Solutions EG21-G and antennas as described in this filing. WiFi mode has been disabled in the module. Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 22 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 02/05/2024 Application Dated: 02/02/2024 |
| 2hire s.r.l. |
| Via Mantova 52 |
| Roma, 00198 Italy |
| Attention: Matteo Filippi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BDMD-2HBM2 |
| Name of Grantee: | 2hire s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Automotive Telematics Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 | |||
| 15C | 2412.0 - 2462.0 | 0.057 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application DoBQm4nnliMUp8D0BeHqrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
2hire s.r.l. Via Mantova 52 Roma, 00198 Italy |
Date of Grant: 02/05/2024 Application Dated: 02/02/2024 |
| Attention: Matteo Filippi |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BDMD-2HBM2 |
| Name of Grantee: | 2hire s.r.l. |
| Equipment Class: | Digital Transmission System |
| Notes: | Automotive Telematics Unit |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0071 | |||
| 15C | 2412.0 - 2462.0 | 0.057 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |