FCC ID 2BDVC-CB22D2USC01

Ethernet / PoE / Wi-Fi Bullet Network Camera

by IENSO INC.

Grantee Code: 2BDVC   Product Code: CB22D2USC01
Latest application date: 2024-01-29

FCC ID Device Details

FCC ID2BDVC-CB22D2USC01
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BDVC
Product CodeCB22D2USC01
Applicant BusinessIENSO INC. 🇨🇦
Related Domains ienso.com ntek.org.cn
Equipment ClassEthernet / PoE / Wi-Fi Bullet Network Camera
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-01-29
2402-2480 MHzOriginal Equipment2024-01-29
5180-5240 MHzOriginal Equipment2024-01-29

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2024-07-27PDF 3.7 MB
Internal photosInternal Photos2024-07-27PDF 2.5 MB
External photosExternal Photos2024-07-27PDF 1.1 MB
ID label and locationID Label/Location Info2024-01-29PDF 395.8 KB
Test setup photosTest Setup Photos2024-07-27PDF 271.8 KB
Test setup photosTest Setup Photos2024-07-27PDF 394.3 KB
Antenna specificationsTest Report2024-01-29PDF 893.4 KB
Antenna specifications BTTest Report2024-01-29PDF 912.9 KB
Antenna specifications WiFiTest Report2024-01-29PDF 893.4 KB
Test reportsTest Report2024-01-29PDF 4 MB
Test reports BLETest Report2024-01-29PDF 4 MB
Test reports WIFI-1Test Report2024-01-29PDF 3.7 MB
Test reports WIFI-2Test Report2024-01-29PDF 1.7 MB
Test reports-1Test Report2024-01-29PDF 1.7 MB
Test reports-2Test Report2024-01-29PDF 5.4 MB
Test reports-3Test Report2024-01-29PDF 5.5 MB
Test reports-4Test Report2024-01-29PDF 3.2 MB
Attestation StatementsAttestation Statements2024-01-29PDF 351.1 KB
ConfidentialityAttestation Statements2024-01-29PDF 351.1 KB
US Agent LetterAttestation Statements2024-01-29PDF 165.7 KB
ConfidentialityCover Letter(s)2024-01-29PDF 371.6 KB
Letter AuthorizationCover Letter(s)2024-01-29PDF 107.7 KB
Software Configuration ControlCover Letter(s)2024-01-29PDF 77.1 KB
RF ExposureRF Exposure Info2024-01-29PDF 288 KB
Block Diagram Metadata onlyBlock DiagramPDF 580.7 KB
Schematics Metadata onlySchematicsPDF 3 MB
Operational Description Metadata onlyOperational DescriptionPDF 287.7 KB
Security Info. Metadata onlySDR Software/Security Info.PDF 306.9 KB

Application Information

Application IDemCh27YLDLc4I99WeTXO4Q==
Final Action Date2024-01-29
Application PurposeOriginal Equipment
Applicant FRN0034555771
ModelCB22D2USC01
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionEthernet / PoE / Wi-Fi Bullet Network Camera
Responsible PartyStelio Derventzis, Director, stelio.derventzis@ienso.com , 905 763 6938
Technical ContactAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., alex.li@ntek.org.cn , 86-755-6115 6588
Non-Technical ContactAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., alex.li@ntek.org.cn , 86-755-6115 6588
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384
TCB Emailelabscert@applus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/27/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.The device contains 20MHz and 40MHz bandwidth.

Applications

Application IDDatePurpose
emCh27YLDLc4I99WeTXO4Q==2024-01-29Original Equipment
Yri3MM+6JxTtKMi9qQY67Q==2024-01-29Original Equipment
Mu1CzLC8rTiolsr85cMjLg==2024-01-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002215CCC
2402-2480 MHz0.003200015CCC
2412-2462 MHz0.046515CCC
5180-5240 MHz0.02915ECC
5260-5320 MHz0.03215ECC, ND
5500-5700 MHz0.025115ECC, ND
5745-5825 MHz0.015815ECC

Grants

TCB Grant - Application Yri3MM+6JxTtKMi9qQY67Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 01/29/2024

Application Dated: 01/29/2024
IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Yri3MM+6JxTtKMi9qQY67Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
  Date of Grant: 01/29/2024

Application Dated: 01/29/2024
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0032  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Mu1CzLC8rTiolsr85cMjLg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 01/29/2024

Application Dated: 01/29/2024
IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC ND 15E 5260.0  -  5320.0 0.032  
CC ND 15E 5500.0  -  5700.0 0.0251  
CC 15E 5745.0  -  5825.0 0.0158  

Output power listed is conducted. The antenna(s) used for this transmitter must be installedto provide a separation distance of at least 20 cm from all persons. End-users must beprovided with operating procedures for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This devicecontains 20MHz and 40MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Mu1CzLC8rTiolsr85cMjLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
  Date of Grant: 01/29/2024

Application Dated: 01/29/2024
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.029  
CC ND 15E 5260.0  -  5320.0 0.032  
CC ND 15E 5500.0  -  5700.0 0.0251  
CC 15E 5745.0  -  5825.0 0.0158  

Output power listed is conducted. The antenna(s) used for this transmitter must be installedto provide a separation distance of at least 20 cm from all persons. End-users must beprovided with operating procedures for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This devicecontains 20MHz and 40MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application emCh27YLDLc4I99WeTXO4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 01/29/2024

Application Dated: 01/29/2024
IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Digital Transmission System
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.0465  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.The device contains 20MHz and 40MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application emCh27YLDLc4I99WeTXO4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

IENSO INC.
Unit 7, 20 Mural Street
Richmond Hill, L4B 1K3
Canada
  Date of Grant: 01/29/2024

Application Dated: 01/29/2024
 
Attention: Stelio Derventzis , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BDVC-CB22D2USC01
Name of Grantee:  IENSO INC.
Equipment Class: Digital Transmission System
Notes: Ethernet / PoE / Wi-Fi Bullet Network Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.0465  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-users must be provided with operating procedures for satisfying RF exposure compliance.The device contains 20MHz and 40MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: