FCC ID 2BE6N-L200S

L200S Light Bulb Cam

by GIRAFIT INC

Grantee Code: 2BE6N   Product Code: L200S
Latest application date: 2024-10-30

FCC ID Device Details

FCC ID2BE6N-L200S
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BE6N
Product CodeL200S
Applicant BusinessGIRAFIT INC 🇺🇸
Related Domains brovisiontech.com
Equipment ClassL200S Light Bulb Cam
Test FirmSHENZHEN TONGCE TESTING LAB

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-10-30
5180-5240 MHzOriginal Equipment2024-10-30

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2025-04-28PDF 2.6 MB
INTERNAL PHOTOSInternal Photos2025-04-28PDF 1.1 MB
Internal photosInternal Photos2025-04-28PDF 1.1 MB
EXTERNAL PHOTOSExternal Photos2025-04-28PDF 915.5 KB
External photosExternal Photos2025-04-28PDF 915.5 KB
LabelID Label/Location Info2024-10-30PDF 376.4 KB
Test photosTest Setup Photos2025-04-28PDF 527.2 KB
test setup photoTest Setup Photos2025-04-28PDF 527.2 KB
ANTTest Report2024-10-30PDF 1.6 MB
AntennaTest Report2024-10-30PDF 1.6 MB
FCC ID 15.247 LETest Report2024-10-30PDF 3.2 MB
FCCID15.247WIFI 1Test Report2024-10-30PDF 4.5 MB
FCCID15.247WIFI 2Test Report2024-10-30PDF 2.7 MB
FCCID15.4075GWIFI 1Test Report2024-10-30PDF 4.9 MB
FCCID15.4075GWIFI 2Test Report2024-10-30PDF 5.9 MB
FCCID15.4075GWIFI 3Test Report2024-10-30PDF 3 MB
Test Report DFSTest Report2024-10-30PDF 584.8 KB
2.911 d 5 ii CertificiationApplicantv1.3Attestation Statements2024-10-30PDF 81.2 KB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2024-10-30PDF 86.1 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2024-10-30PDF 81.2 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2024-10-30PDF 87.8 KB
2.911 (d)(7)USAgentforServiceofProcessv1.3Attestation Statements2024-10-30PDF 87.8 KB
AGent Authorization Rev 1.0Cover Letter(s)2024-10-30PDF 58.8 KB
Agent Authorization Rev 1.0Cover Letter(s)2024-10-30PDF 58.8 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2024-10-30PDF 21.4 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2024-10-30PDF 51.4 KB
Model StatementCover Letter(s)2024-10-30PDF 53.3 KB
Model differnceCover Letter(s)2024-10-30PDF 53.3 KB
RF EXPOSURERF Exposure Info2024-10-30PDF 360 KB
RF ExposureRF Exposure Info2024-10-30PDF 360 KB
BLOCK Diagram Metadata onlyBlock DiagramPDF 172.8 KB
Block diagram Metadata onlyBlock DiagramPDF 172.8 KB
SCH Metadata onlySchematicsPDF 502.5 KB
OP Metadata onlyOperational DescriptionPDF 87 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security Info.PDF 82.2 KB

Application Information

Application IDfId8TupkMT/XFFQluaju2Q==
Final Action Date2024-10-30
Application PurposeOriginal Equipment
Applicant FRN0035013044
ModelL200S
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionL200S Light Bulb Cam
Responsible Partycecilia wang, cecilia.wang@brovisiontech.com , +852-2889-0778
Technical ContactGIRAFIT INC, cecilia.wang@brovisiontech.com
Test FirmBeryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com , +8675527208735
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/28/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fId8TupkMT/XFFQluaju2Q==2024-10-30Original Equipment
bSADthscyT1+qr15GT+QZw==2024-10-30Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002215CCC
2412-2462 MHz0.046315CCC
5180-5240 MHz0.034615ECC
5260-5320 MHz0.013815ECC, ND
5745-5825 MHz0.028615ECC

Grants

TCB Grant - Application fId8TupkMT/XFFQluaju2Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/30/2024

Application Dated: 10/30/2024
GIRAFIT INC
21642 GOLDEN POPPY COURT
WALNUT, CA 91749
 
Attention: cecilia wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BE6N-L200S
Name of Grantee:  GIRAFIT INC
Equipment Class: Digital Transmission System
Notes: L200S Light Bulb Cam
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.0463  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fId8TupkMT/XFFQluaju2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GIRAFIT INC
21642 GOLDEN POPPY COURT
WALNUT, CA 91749
United States
  Date of Grant: 10/30/2024

Application Dated: 10/30/2024
 
Attention: cecilia wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BE6N-L200S
Name of Grantee:  GIRAFIT INC
Equipment Class: Digital Transmission System
Notes: L200S Light Bulb Cam
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0022  
CC 15C 2412.0  -  2462.0 0.0463  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application bSADthscyT1+qr15GT+QZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/30/2024

Application Dated: 10/30/2024
GIRAFIT INC
21642 GOLDEN POPPY COURT
WALNUT, CA 91749
 
Attention: cecilia wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BE6N-L200S
Name of Grantee:  GIRAFIT INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: L200S Light Bulb Cam
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0346  
CC ND 15E 5260.0  -  5320.0 0.0138  
CC 15E 5745.0  -  5825.0 0.0286  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application bSADthscyT1+qr15GT+QZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

GIRAFIT INC
21642 GOLDEN POPPY COURT
WALNUT, CA 91749
United States
  Date of Grant: 10/30/2024

Application Dated: 10/30/2024
 
Attention: cecilia wang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BE6N-L200S
Name of Grantee:  GIRAFIT INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: L200S Light Bulb Cam
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0346  
CC ND 15E 5260.0  -  5320.0 0.0138  
CC 15E 5745.0  -  5825.0 0.0286  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: