FCC ID 2BE9F-FLDPRNTR200
LoRa Radio Module
by Dusty Robotics, Inc.
Grantee Code: 2BE9F Product Code: FLDPRNTR200
Latest application date: 2025-01-03
FCC ID Device Details
| FCC ID | 2BE9F-FLDPRNTR200 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BE9F |
| Product Code | FLDPRNTR200 |
| Applicant Business | Dusty Robotics, Inc. 🇺🇸 |
| Related Domains |  dustyrobotics.com |
| Equipment Class | LoRa Radio Module |
| Test Firm | Bay Area Compliance Laboratories Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-927.5 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-03 |
| 902.5-927.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AD66-1276-C1 Grant Date: 10/28/2024 | 2024-12-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Part 1 | Users Manual | 2025-07-02 | PDF 4.7 MB |
| User Manual Part 2 | Users Manual | 2025-07-02 | PDF 3.7 MB |
| User Manual Part 3 | Users Manual | 2025-07-02 | PDF 3.1 MB |
| Internal Photos | Internal Photos | 2025-07-02 | PDF 757 KB |
| External Photos | External Photos | 2025-07-02 | PDF 295.4 KB |
| External Photos | External Photos | 2025-06-14 | PDF 388.6 KB |
| Label & Label Location | ID Label/Location Info | 2025-01-03 | PDF 242 KB |
| Label & Label Location | ID Label/Location Info | 2024-12-16 | PDF 368.3 KB |
| Test Setup Photos | Test Setup Photos | 2025-07-02 | PDF 762.1 KB |
| Antenna Specification | Test Report | 2025-01-03 | PDF 1.9 MB |
| Antenna Specification | Test Report | 2025-01-03 | PDF 3 MB |
| Test Report | Test Report | 2025-01-03 | PDF 1.5 MB |
| 2.911 (d)(5)(i) Attestation Statement | Attestation Statements | 2025-01-03 | PDF 172.5 KB |
| 2.911 (d)(5)(ii) Attestation Statement | Attestation Statements | 2025-01-03 | PDF 180.9 KB |
| US Agent Attestation Letter | Attestation Statements | 2025-01-03 | PDF 179.8 KB |
| C2PC Request letter | Cover Letter(s) | 2025-01-03 | PDF 276.6 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2025-01-03 | PDF 182.7 KB |
| FCC Short term Confidentiality Request | Cover Letter(s) | 2025-01-03 | PDF 174.1 KB |
| Authorization Letter from Original Grantee | Cover Letter(s) | 2024-12-16 | PDF 230.3 KB |
| Change in ID Request Letter | Cover Letter(s) | 2024-12-16 | PDF 159.9 KB |
| FCC Short term Confidentiality Request | Cover Letter(s) | 2024-12-16 | PDF 144.3 KB |
| RF Exposure | RF Exposure Info | 2025-01-03 | PDF 144 KB |
Application Information
| Application ID | dWCiHFYnJVzXACG/WqS08g== |
|---|---|
| Final Action Date | 2025-01-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0034939579 |
| Model | FLDPRNTR200 |
| Frequency Range | 902.5-927.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | LoRa Radio Module |
| Responsible Party | Paul Finkel, Principal Engineer, pfinkel@dustyrobotics.com , 650-618-6285 |
| Test Firm | Lisa Tang, Bay Area Compliance Laboratories Corp., lisat@baclcorp.com  , 408-732-9162 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/02/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dWCiHFYnJVzXACG/WqS08g== | 2025-01-03 | Class II permissive change or modification of presently authorized equipment |
| Hij83FgAWhe7kr6YIObPjA== | 2024-12-16 | Change in identification of presently authorized equipment. Original FCC ID: 2AD66-1276-C1 Grant Date: 10/28/2024 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.5-927.5 MHz | 0.0749900 | 15C |
Grants
TCB Grant - Application Hij83FgAWhe7kr6YIObPjA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 12/16/2024 Application Dated: 12/16/2024 |
| Dusty Robotics, Inc. |
| 909 San Rafael Ave. |
| Mountain View, CA 94043 |
| Attention: Paul Finkel , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BE9F-FLDPRNTR200 |
| Name of Grantee: | Dusty Robotics, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.07499 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application Hij83FgAWhe7kr6YIObPjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dusty Robotics, Inc. 909 San Rafael Ave. Mountain View, CA 94043 United States |
Date of Grant: 12/16/2024 Application Dated: 12/16/2024 |
| Attention: Paul Finkel , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BE9F-FLDPRNTR200 |
| Name of Grantee: | Dusty Robotics, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.07499 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Dusty Robotics, Inc. |
| 909 San Rafael Ave. |
| Mountain View, CA 94043 |
| Attention: Paul Finkel , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BE9F-FLDPRNTR200 |
| Name of Grantee: | Dusty Robotics, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.07499 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
EAS Grant - Application dWCiHFYnJVzXACG/WqS08g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Dusty Robotics, Inc. 909 San Rafael Ave. Mountain View, CA 94043 United States |
Date of Grant: 01/03/2025 Application Dated: 01/03/2025 |
| Attention: Paul Finkel , Principal Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BE9F-FLDPRNTR200 |
| Name of Grantee: | Dusty Robotics, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | LoRa Radio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.5 | 0.07499 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| Mail To: |