FCC ID 2BEIX-2938X
Wi-Fi & Bluetooth Internet of Things Module
by Myomo Inc
Grantee Code: 2BEIX Product Code: 2938X
Latest application date: 2024-01-31
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-31 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-31 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 | 2024-01-29 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 | 2024-01-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2024-01-31 | PDF 269.3 KB |
| External Photos | External Photos | 2024-01-29 | PDF 992.5 KB |
| Label Information | ID Label/Location Info | 2024-01-31 | PDF 238.6 KB |
| Label Information | ID Label/Location Info | 2024-01-29 | PDF 487.8 KB |
| 2.911(d)(5)(i)-(ii) Covered Equipment | Attestation Statements | 2024-01-31 | PDF 164.1 KB |
| 2.911(d)(7) Agent of Service | Attestation Statements | 2024-01-31 | PDF 103.2 KB |
| Agency Agreement | Cover Letter(s) | 2024-01-31 | PDF 88.7 KB |
| C2PC Cover Letter | Cover Letter(s) | 2024-01-31 | PDF 76.8 KB |
| Change in ID Authorization Letter | Cover Letter(s) | 2024-01-29 | PDF 24.5 KB |
| Change in ID Request Letter | Cover Letter(s) | 2024-01-29 | PDF 89.7 KB |
| SAR Report | RF Exposure Info | 2024-01-31 | PDF 2.8 MB |
Application Information
| Application ID | s20ZAV1Jt2dwQFBL+Cm9+w== |
|---|---|
| Final Action Date | 2024-01-31 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0034735886 |
| Model | 2938X |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi & Bluetooth Internet of Things Module |
| Responsible Party | Andrew Ryan Harlan, Director of Engineering, andrew.harlan@myomo.com  , 6179038533 |
| Agent | Rossana Rossana Rossana, TUV SUD America |
| Test Firm | Tamara Moulton, RF Exposure Lab, LLC, tamoulton@rfexposurelab.com  , 760 471 2100 |
| TCB Email | jeff.woods@tuvsud.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. C2PC to address integration into portable host as described in this filing. WiFi power is limited to 100mW when installed in the host device. The highest reported SAR is 0.16 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| s20ZAV1Jt2dwQFBL+Cm9+w== | 2024-01-31 | Class II permissive change or modification of presently authorized equipment |
| juYa9k9K3IACA6A2KNuqNg== | 2024-01-31 | Class II permissive change or modification of presently authorized equipment |
| qURl+xE1HfaH8RQ+6GqRWw== | 2024-01-29 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 |
| 62zuPDuITLFbkpc1uzX5Ow== | 2024-01-29 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 |
Equipment Authorization
Grants
TCB Grant - Application s20ZAV1Jt2dwQFBL+Cm9+w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/31/2024 Application Dated: 01/31/2024 |
| Myomo Inc |
| 137 Portland St FL4 |
| Boston, MA 02114 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. C2PC to address integration into portable host as described in this filing. WiFi power is limited to 100mW when installed in the host device. The highest reported SAR is 0.16 W/kg. |
EAS Grant - Application s20ZAV1Jt2dwQFBL+Cm9+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Myomo Inc 137 Portland St FL4 Boston, MA 02114 United States |
Date of Grant: 01/31/2024 Application Dated: 01/31/2024 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. C2PC to address integration into portable host as described in this filing. WiFi power is limited to 100mW when installed in the host device. The highest reported SAR is 0.16 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/29/2024 Application Dated: 01/29/2024 |
| Myomo Inc |
| 137 Portland St FL4 |
| Boston, MA 02114 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application qURl+xE1HfaH8RQ+6GqRWw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Myomo Inc 137 Portland St FL4 Boston, MA 02114 United States |
Date of Grant: 01/29/2024 Application Dated: 01/29/2024 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/31/2024 Application Dated: 01/31/2024 |
| Myomo Inc |
| 137 Portland St FL4 |
| Boston, MA 02114 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. C2PC to address integration into portable host as described in this filing. |
EAS Grant - Application juYa9k9K3IACA6A2KNuqNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Myomo Inc 137 Portland St FL4 Boston, MA 02114 United States |
Date of Grant: 01/31/2024 Application Dated: 01/31/2024 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. C2PC to address integration into portable host as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 01/29/2024 Application Dated: 01/29/2024 |
| Myomo Inc |
| 137 Portland St FL4 |
| Boston, MA 02114 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
EAS Grant - Application 62zuPDuITLFbkpc1uzX5Ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Myomo Inc 137 Portland St FL4 Boston, MA 02114 United States |
Date of Grant: 01/29/2024 Application Dated: 01/29/2024 |
| Attention: Andrew Harlan , Director of Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEIX-2938X |
| Name of Grantee: | Myomo Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| Mail To: |