FCC ID 2BEK7SRM200A
Monarch Quad-mode module
by SJIT Co.,Ltd
Grantee Code: 2BEK7 Product Code: SRM200A
Latest application date: 2024-10-03
FCC ID Device Details
| FCC ID | 2BEK7SRM200A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BEK7 |
| Product Code | SRM200A |
| Applicant Business | SJIT Co.,Ltd 🇰🇷 |
| Related Domains |  seongji.co.kr |
| Equipment Class | Monarch Quad-mode module |
| Test Firm | HCT Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.138-904.663 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSRM200A Grant Date: 12/17/2019 | 2024-10-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSRM200A Grant Date: 12/17/2019 | 2024-10-03 |
Exhibits
Application Information
| Application ID | MVXTWrf1SyHYgOWOd6kAPA== |
|---|---|
| Final Action Date | 2024-10-03 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSRM200A Grant Date: 12/17/2019 |
| Applicant FRN | 0034759704 |
| Model | SRM200A |
| Frequency Range | 902.138-904.663 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Monarch Quad-mode module |
| Responsible Party | Wan Seong Kim, Manager, wskim@seongji.co.kr , +82-31-222-8194 |
| Test Firm | Lee MyoungLim, HCT Co., Ltd., lmlim@hct.co.kr  , 82-31-645-6918 |
| TCB Email | charvey@ieee.org  , jennifer.s@hctamerica.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power output is conducted. This module is limited, requiring the host integrator to perform additional testing as provide by the manufacturer’s integrations instructions for: voltage regulation. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MVXTWrf1SyHYgOWOd6kAPA== | 2024-10-03 | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSRM200A Grant Date: 12/17/2019 |
| EGSCVpxQ+QJSvSy+0czXwQ== | 2024-10-03 | Change in identification of presently authorized equipment. Original FCC ID: 2AS8LSRM200A Grant Date: 12/17/2019 |
Equipment Authorization
Grants
TCB Grant - Application MVXTWrf1SyHYgOWOd6kAPA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America, Inc. 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 10/03/2024 Application Dated: 08/08/2024 |
| SJIT Co.,Ltd |
| 54-11, Dongtanhana 1-gil, |
| Hwaseong-si, Gyeonggi-do,, South Korea |
| Attention: Wan Seong Kim , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEK7SRM200A |
| Name of Grantee: | SJIT Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Monarch Quad-mode module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.1375 - 904.6625 | 0.341 | ||
| CC | 15C | 920.7375 - 923.2625 | 0.344 |
| Power output is conducted. This module is limited, requiring the host integrator to perform additional testing as provide by the manufacturer’s integrations instructions for: voltage regulation. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application MVXTWrf1SyHYgOWOd6kAPA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SJIT Co.,Ltd 54-11, Dongtanhana 1-gil, Hwaseong-si, Gyeonggi-do,, South Korea |
Date of Grant: 10/03/2024 Application Dated: 08/08/2024 |
| Attention: Wan Seong Kim , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEK7SRM200A |
| Name of Grantee: | SJIT Co.,Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Monarch Quad-mode module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.1375 - 904.6625 | 0.341 | ||
| CC | 15C | 920.7375 - 923.2625 | 0.344 |
| Power output is conducted. This module is limited, requiring the host integrator to perform additional testing as provide by the manufacturer’s integrations instructions for: voltage regulation. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America, Inc. 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 10/03/2024 Application Dated: 09/09/2024 |
| SJIT Co.,Ltd |
| 54-11, Dongtanhana 1-gil, |
| Hwaseong-si, Gyeonggi-do,, South Korea |
| Attention: Wan Seong Kim , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEK7SRM200A |
| Name of Grantee: | SJIT Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Monarch Quad-mode Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00233 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.101 |
| Power output is conducted. This module is limited, requiring the host integrator to perform additional testing as provide by the manufacturer’s integrations instructions for: voltage regulation. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application EGSCVpxQ+QJSvSy+0czXwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SJIT Co.,Ltd 54-11, Dongtanhana 1-gil, Hwaseong-si, Gyeonggi-do,, South Korea |
Date of Grant: 10/03/2024 Application Dated: 09/09/2024 |
| Attention: Wan Seong Kim , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEK7SRM200A |
| Name of Grantee: | SJIT Co.,Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Monarch Quad-mode Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00233 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.101 |
| Power output is conducted. This module is limited, requiring the host integrator to perform additional testing as provide by the manufacturer’s integrations instructions for: voltage regulation. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |