FCC ID 2BEWX-TPA10
Control Panel MAX
by Zhejiang Lingzhu Technology Co., Ltd.
Grantee Code: 2BEWX Product Code: TPA10
Latest application date: 2024-07-31
FCC ID Device Details
| FCC ID | 2BEWX-TPA10 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BEWX |
| Product Code | TPA10 |
| Applicant Business | Zhejiang Lingzhu Technology Co., Ltd. 🇨🇳 |
| Related Domains |  smartlz.com |
| Equipment Class | Control Panel MAX |
| Test Firm | Sporton International Inc. (Kunshan) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2A789-TPA10 Grant Date: 08/22/2023 | 2024-07-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2A789-TPA10 Grant Date: 08/22/2023 | 2024-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal photos | Internal Photos | 2024-07-31 | PDF 1.8 MB |
| External photos | External Photos | 2024-07-31 | PDF 998.3 KB |
| Label | ID Label/Location Info | 2024-07-31 | PDF 71.6 KB |
| Test setup | Test Setup Photos | 2024-07-31 | PDF 219.5 KB |
| Test setup BLE | Test Setup Photos | 2024-07-31 | PDF 207.6 KB |
| Test setup WiFi | Test Setup Photos | 2024-07-31 | PDF 200.7 KB |
| Test setup Zigbee | Test Setup Photos | 2024-07-31 | PDF 200.7 KB |
| Test setup antenna | Test Setup Photos | 2024-07-31 | PDF 224.1 KB |
| Antenna specification | Test Report | 2024-07-31 | PDF 404.1 KB |
| Test report | Test Report | 2024-07-31 | PDF 4.5 MB |
| Test report BLE | Test Report | 2024-07-31 | PDF 4.3 MB |
| Test report WiFi | Test Report | 2024-07-31 | PDF 5 MB |
| Test report Zigbee | Test Report | 2024-07-31 | PDF 3.3 MB |
| Covered equipment list attestation | Attestation Statements | 2024-07-31 | PDF 38.8 KB |
| US agent attestation | Attestation Statements | 2024-07-31 | PDF 77.6 KB |
| Agent letter | Cover Letter(s) | 2024-07-31 | PDF 80 KB |
| Cover letter | Cover Letter(s) | 2024-07-31 | PDF 69.5 KB |
| Cover letter | Cover Letter(s) | 2024-07-31 | PDF 83.8 KB |
| RF Exposure | RF Exposure Info | 2024-07-31 | PDF 374.4 KB |
Application Information
| Application ID | t+lbsH5yMxjiR/f+zRzfeg== |
|---|---|
| Final Action Date | 2024-07-31 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2A789-TPA10 Grant Date: 08/22/2023 |
| Applicant FRN | 0034841213 |
| Model | TPA10 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Control Panel MAX |
| Responsible Party | Linyun Li, Manager, lilinyun@smartlz.com , 0571-86581786 |
| Test Firm | Jim Tsai, Sporton International Inc. (Kunshan), JimTsai@sporton.com.tw  , +86 0512 57900158 |
| TCB Email | TCB@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode, and must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| t+lbsH5yMxjiR/f+zRzfeg== | 2024-07-31 | Change in identification of presently authorized equipment. Original FCC ID: 2A789-TPA10 Grant Date: 08/22/2023 |
| TWqkDLJM1Y62Mg26HhKouQ== | 2024-07-31 | Change in identification of presently authorized equipment. Original FCC ID: 2A789-TPA10 Grant Date: 08/22/2023 |
Equipment Authorization
Grants
TCB Grant - Application TWqkDLJM1Y62Mg26HhKouQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/31/2024 Application Dated: 07/30/2024 |
| Zhejiang Lingzhu Technology Co., Ltd. |
| Room 302,No 1 Building Huace Center,Xihu District |
| Hangzhou, 310000 China |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEWX-TPA10 |
| Name of Grantee: | Zhejiang Lingzhu Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control Panel MAX |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0063 |
| Output power listed is conducted. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application TWqkDLJM1Y62Mg26HhKouQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zhejiang Lingzhu Technology Co., Ltd. Room 302,No 1 Building Huace Center,Xihu District Hangzhou, 310000 China |
Date of Grant: 07/31/2024 Application Dated: 07/30/2024 |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEWX-TPA10 |
| Name of Grantee: | Zhejiang Lingzhu Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Control Panel MAX |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0063 |
| Output power listed is conducted. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/31/2024 Application Dated: 07/30/2024 |
| Zhejiang Lingzhu Technology Co., Ltd. |
| Room 302,No 1 Building Huace Center,Xihu District |
| Hangzhou, 310000 China |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEWX-TPA10 |
| Name of Grantee: | Zhejiang Lingzhu Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Control Panel MAX |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2518 | |||
| 15C | 2402.0 - 2480.0 | 0.0048 | |||
| 15C | 2405.0 - 2480.0 | 0.0679 |
| Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode, and must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application t+lbsH5yMxjiR/f+zRzfeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zhejiang Lingzhu Technology Co., Ltd. Room 302,No 1 Building Huace Center,Xihu District Hangzhou, 310000 China |
Date of Grant: 07/31/2024 Application Dated: 07/30/2024 |
| Attention: Linyun Li , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BEWX-TPA10 |
| Name of Grantee: | Zhejiang Lingzhu Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Control Panel MAX |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2518 | |||
| 15C | 2402.0 - 2480.0 | 0.0048 | |||
| 15C | 2405.0 - 2480.0 | 0.0679 |
| Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode, and must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |