FCC ID 2BEYTM87P4

UHF RFID 4-Port Module

by Xema, Inc.

Grantee Code: 2BEYT   Product Code: M87P4
Latest application date: 2024-10-21

FCC ID Device Details

FCC ID2BEYTM87P4
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BEYT
Product CodeM87P4
Applicant BusinessXema, Inc. 🇺🇸
Related Domains xemainc.com cerpass.com.tw
Equipment ClassUHF RFID 4-Port Module
Test FirmCerpass Technology Corporation Test Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzOriginal Equipment2024-10-21

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2024-10-21PDF 753.5 KB
Internal PhotosInternal Photos2025-04-16PDF 3 MB
External PhotosExternal Photos2024-10-21PDF 3 MB
ID Label/Location InfoID Label/Location Info2024-10-21PDF 107.8 KB
Test Setup PhotosTest Setup Photos2024-10-21PDF 3.9 MB
Antenna specTest Report2024-10-21PDF 1.3 MB
Test ReportTest Report2024-10-21PDF 3.9 MB
Attestation StatementsAttestation Statements2024-10-21PDF 137.8 KB
US Agent LetterAttestation Statements2024-10-21PDF 117.5 KB
ConfidentialityCover Letter(s)2024-10-21PDF 81.6 KB
Declaration of authorizationCover Letter(s)2024-10-21PDF 82.7 KB
FCC Modular Approval RequestCover Letter(s)2024-10-21PDF 123.2 KB
RF Exposure Info.RF Exposure Info2024-10-21PDF 3.9 MB
Block Diagram Metadata onlyBlock DiagramPDF 17.2 KB
Schematics Metadata onlySchematicsPDF 66.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 46.9 KB

Application Information

Application IDnKOWoZeql8JoSXGXu5VsgA==
Final Action Date2024-10-21
Application PurposeOriginal Equipment
Applicant FRN0034872176
ModelM87P4
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionUHF RFID 4-Port Module
Responsible PartyWayne Lin, Director, wayne@xemainc.com , 562 204 0292
AgentNina Nina Nina, Cerpass Technology Corporation, ninah@cerpass.com.tw , 033226888
Technical ContactPike Chang, Xema, Inc., wayne@xemainc.com , 5622040292
Non-Technical ContactNina Hsu, Cerpass Technology Corp., ninah@cerpass.com.tw , 033226888
Test FirmBen Wang, Cerpass Technology Corporation Test Laboratory, benw@cerpass.com.tw , +886-3-3226888
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/16/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
nKOWoZeql8JoSXGXu5VsgA==2024-10-21Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz0.830000015C

Grants

TCB Grant - Application nKOWoZeql8JoSXGXu5VsgA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Kiwa Nederland B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 10/21/2024

Application Dated: 10/17/2024
Xema, Inc.
12960 Sunnyside Place
Santa Fe Springs, CA 90670
 
Attention: Wayne Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BEYTM87P4
Name of Grantee:  Xema, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID 4-Port Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.83  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application nKOWoZeql8JoSXGXu5VsgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Xema, Inc.
12960 Sunnyside Place
Santa Fe Springs, CA 90670
United States
  Date of Grant: 10/21/2024

Application Dated: 10/17/2024
 
Attention: Wayne Lin , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BEYTM87P4
Name of Grantee:  Xema, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: UHF RFID 4-Port Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.75  -  927.25 0.83  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: