FCC ID 2BF27-ICUBE
Desktop Laser Engraver
by Shenzhen Sculpfun Technology Co., Ltd.
Grantee Code: 2BF27 Product Code: ICUBE
Latest application date: 2024-05-17
FCC ID Device Details
| FCC ID | 2BF27-ICUBE |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BF27 |
| Product Code | ICUBE |
| Applicant Business | Shenzhen Sculpfun Technology Co., Ltd. 🇨🇳 |
| Related Domains |  sculpfun.com |
| Equipment Class | Desktop Laser Engraver |
| Test Firm | Shenzhen LGT Test Service Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-05-17 |
| 2412-2462 MHz | Original Equipment | 2024-05-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-05-17 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2024-05-17 | PDF 1.7 MB |
| External Photos | External Photos | 2024-05-17 | PDF 1.6 MB |
| label and location | ID Label/Location Info | 2024-05-17 | PDF 184.5 KB |
| Test Setup Photos | Test Setup Photos | 2024-05-17 | PDF 304.5 KB |
| Test Report | Test Report | 2024-05-17 | PDF 3 MB |
| Test Report | Test Report | 2024-05-17 | PDF 2.9 MB |
| Agent letter | Attestation Statements | 2024-05-17 | PDF 350.7 KB |
| Attestation of Cover List | Attestation Statements | 2024-05-17 | PDF 199.5 KB |
| Agent Authorization Letter Template | Cover Letter(s) | 2024-05-17 | PDF 273.1 KB |
| Antenna Report | Cover Letter(s) | 2024-05-17 | PDF 694.9 KB |
| FCC Short Long Term Confidentiality Request | Cover Letter(s) | 2024-05-17 | PDF 191.9 KB |
| Model difference | Cover Letter(s) | 2024-05-17 | PDF 370 KB |
| RF Exposure | RF Exposure Info | 2024-05-17 | PDF 319 KB |
| BlockDiagram Metadata only | Block Diagram | PDF 122.5 KB | |
| Schematics Metadata only | Schematics | PDF 5.5 MB | |
| OperatingDescription Metadata only | Operational Description | PDF 91.9 KB |
Application Information
| Application ID | mHp+ckiTRDPli2I0ki3CwA== |
|---|---|
| Final Action Date | 2024-05-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0035331347 |
| Model | ICUBE |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Desktop Laser Engraver |
| Responsible Party | JIA HE, design@sculpfun.com , 13049380508 |
| Technical Contact | Shenzhen Sculpfun Technology Co., Ltd., design@sculpfun.com |
| Test Firm | Wen Wen, Shenzhen LGT Test Service Co., Ltd., qa@lgt-cert.com  , 0755-89668180 |
| TCB Email | anezam@qai.org  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mHp+ckiTRDPli2I0ki3CwA== | 2024-05-17 | Original Equipment |
| N8UCV02OKLPYLt0UG/Yu/g== | 2024-05-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application N8UCV02OKLPYLt0UG/Yu/g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
QAI LABORATORIES LTD 3980 North Fraser Way Burnaby, BC, V5J5K5 Canada |
Date of Grant: 05/17/2024 Application Dated: 05/16/2024 |
| Shenzhen Sculpfun Technology Co., Ltd. |
| Room 201, Building B, Jinzhicai Factory, |
| No. 1, Guihua Industrial Zone, Guanlan Street, |
| Longhua District, Shenzhen City, Guangdong, China |
| Attention: JIA HE |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF27-ICUBE |
| Name of Grantee: | Shenzhen Sculpfun Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Desktop Laser Engraver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03412 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application N8UCV02OKLPYLt0UG/Yu/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Sculpfun Technology Co., Ltd. Room 201, Building B, Jinzhicai Factory, No. 1, Guihua Industrial Zone, Guanlan Street, Longhua District, Shenzhen City, Guangdong, China |
Date of Grant: 05/17/2024 Application Dated: 05/16/2024 |
| Attention: JIA HE |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF27-ICUBE |
| Name of Grantee: | Shenzhen Sculpfun Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Desktop Laser Engraver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.03412 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
QAI LABORATORIES LTD 3980 North Fraser Way Burnaby, BC, V5J5K5 Canada |
Date of Grant: 05/17/2024 Application Dated: 05/16/2024 |
| Shenzhen Sculpfun Technology Co., Ltd. |
| Room 201, Building B, Jinzhicai Factory, |
| No. 1, Guihua Industrial Zone, Guanlan Street, |
| Longhua District, Shenzhen City, Guangdong, China |
| Attention: JIA HE |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF27-ICUBE |
| Name of Grantee: | Shenzhen Sculpfun Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Desktop Laser Engraver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00608 |
| Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mHp+ckiTRDPli2I0ki3CwA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Sculpfun Technology Co., Ltd. Room 201, Building B, Jinzhicai Factory, No. 1, Guihua Industrial Zone, Guanlan Street, Longhua District, Shenzhen City, Guangdong, China |
Date of Grant: 05/17/2024 Application Dated: 05/16/2024 |
| Attention: JIA HE |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF27-ICUBE |
| Name of Grantee: | Shenzhen Sculpfun Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Desktop Laser Engraver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00608 |
| Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |