FCC ID 2BF4E-RW402B
Thermal Label Printer
by Guangzhou MUNBYN Information Technology Co., Ltd.
Grantee Code: 2BF4E Product Code: RW402B
Latest application date: 2024-08-12
FCC ID Device Details
| FCC ID | 2BF4E-RW402B |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BF4E |
| Product Code | RW402B |
| Applicant Business | Guangzhou MUNBYN Information Technology Co., Ltd. 🇨🇳 |
| Equipment Class | Thermal Label Printer |
| Test Firm | Shenzhen EU Testing Laboratory Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2024-08-12 |
| 2402-2480 MHz | Original Equipment | 2024-08-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2024-08-12 | PDF 4.5 MB |
| Internal Photos | Internal Photos | 2024-08-12 | PDF 3.3 MB |
| External Photos | External Photos | 2024-08-12 | PDF 2.1 MB |
| LabeLocation&Label | ID Label/Location Info | 2024-08-12 | PDF 179.2 KB |
| T Setup photos | Test Setup Photos | 2024-08-12 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2024-08-12 | PDF 1.1 MB |
| Antenna specification | Test Report | 2024-08-12 | PDF 304.6 KB |
| Test Data for BLE | Test Report | 2024-08-12 | PDF 1.1 MB |
| Test Data for BT | Test Report | 2024-08-12 | PDF 3.6 MB |
| Test Report FCC15.247 BLE | Test Report | 2024-08-12 | PDF 1.6 MB |
| Test report FCC15.247 BT | Test Report | 2024-08-12 | PDF 1.7 MB |
| 2.911 (d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2024-08-12 | PDF 138.5 KB |
| 2.911 (d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2024-08-12 | PDF 114.6 KB |
| 2.911 (d)(7) US Agent for Service of Process v1.4 | Attestation Statements | 2024-08-12 | PDF 171.4 KB |
| Agent Authorization Rev1.0 | Cover Letter(s) | 2024-08-12 | PDF 82.8 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2024-08-12 | PDF 90 KB |
| RF EXPOSURE EVALUATION | RF Exposure Info | 2024-08-12 | PDF 133.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 112.8 KB | |
| Block diagram Metadata only | Block Diagram | PDF 112.8 KB | |
| SCH Metadata only | Schematics | PDF 540.1 KB | |
| OP Metadata only | Operational Description | PDF 448.3 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 49.9 KB |
Application Information
| Application ID | hCtor+5EX24MyJ1RAEQVzw== |
|---|---|
| Final Action Date | 2024-08-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0035336841 |
| Model | RW402B |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Thermal Label Printer |
| Responsible Party | Clarice Xie, Manager, wch.issyzone@gmail.com  , 13423772540 |
| Technical Contact | Guangzhou MUNBYN Information Technology Co., Ltd., wch.issyzone@gmail.com |
| Test Firm | Sally Zhang, Shenzhen EU Testing Laboratory Limited, sally.zhang@eu-test.com  , (86)-18824580176 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hCtor+5EX24MyJ1RAEQVzw== | 2024-08-12 | Original Equipment |
| +n2Ue5dFp4Pl4uxEL7X38A== | 2024-08-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application hCtor+5EX24MyJ1RAEQVzw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/12/2024 Application Dated: 08/12/2024 |
| Guangzhou MUNBYN Information Technology Co., Ltd. |
| Unit L3A01-4, No. 31-6, Xicha Road, |
| Baiyun District, |
| Guangzhou, Guangdong Province, China |
| Attention: Clarice Xie , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF4E-RW402B |
| Name of Grantee: | Guangzhou MUNBYN Information Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal Label Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application hCtor+5EX24MyJ1RAEQVzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou MUNBYN Information Technology Co., Ltd. Unit L3A01-4, No. 31-6, Xicha Road, Baiyun District, Guangzhou, Guangdong Province, China |
Date of Grant: 08/12/2024 Application Dated: 08/12/2024 |
| Attention: Clarice Xie , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF4E-RW402B |
| Name of Grantee: | Guangzhou MUNBYN Information Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Thermal Label Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0012 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/12/2024 Application Dated: 08/12/2024 |
| Guangzhou MUNBYN Information Technology Co., Ltd. |
| Unit L3A01-4, No. 31-6, Xicha Road, |
| Baiyun District, |
| Guangzhou, Guangdong Province, China |
| Attention: Clarice Xie , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF4E-RW402B |
| Name of Grantee: | Guangzhou MUNBYN Information Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal Label Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0003 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +n2Ue5dFp4Pl4uxEL7X38A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou MUNBYN Information Technology Co., Ltd. Unit L3A01-4, No. 31-6, Xicha Road, Baiyun District, Guangzhou, Guangdong Province, China |
Date of Grant: 08/12/2024 Application Dated: 08/12/2024 |
| Attention: Clarice Xie , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BF4E-RW402B |
| Name of Grantee: | Guangzhou MUNBYN Information Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Thermal Label Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0003 |
| Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |