FCC ID 2BF8I-DR1003BCC

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 01/07/2025 Application Dated: 01/07/2025

ISEFY TECHNOLOGY

26 Pine Street.

P.O. Box M9N 2Y8,

Toronto, M9N 2Y8 Canada

Attention: john fan

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BF8I-DR1003BC-C
Name of Grantee:	ISEFY TECHNOLOGY
Equipment Class:	Digital Transmission System
Notes:	ISEFY

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.0259

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ISEFY TECHNOLOGY 26 Pine Street. P.O. Box M9N 2Y8, Toronto, M9N 2Y8 Canada

Date of Grant: 01/07/2025 Application Dated: 01/07/2025

Attention: john fan

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BF8I-DR1003BC-C
Name of Grantee:	ISEFY TECHNOLOGY
Equipment Class:	Digital Transmission System
Notes:	ISEFY
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.0259

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application aCD2tocuJCqo6axSlhkYuA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 01/07/2025 Application Dated: 01/07/2025

ISEFY TECHNOLOGY

26 Pine Street.

P.O. Box M9N 2Y8,

Toronto, M9N 2Y8 Canada

Attention: john fan

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BF8I-DR1003BC-C
Name of Grantee:	ISEFY TECHNOLOGY
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	ISEFY

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.0202
CC ND	15E	5260.0  -  5320.0	0.02
CC ND	15E	5500.0  -  5720.0	0.0197
CC	15E	5745.0  -  5825.0	0.013

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

ISEFY TECHNOLOGY 26 Pine Street. P.O. Box M9N 2Y8, Toronto, M9N 2Y8 Canada

Date of Grant: 01/07/2025 Application Dated: 01/07/2025

Attention: john fan

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BF8I-DR1003BC-C
Name of Grantee:	ISEFY TECHNOLOGY
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	ISEFY
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.0202
CC ND	15E	5260.0  -  5320.0	0.02
CC ND	15E	5500.0  -  5720.0	0.0197
CC	15E	5745.0  -  5825.0	0.013

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: