FCC ID 2BFKJ-WFM200SN

802.11b/g/n Wi-Fi wireless radio module

by Anna Ambassador LLC d/b/a LootCo

Grantee Code: 2BFKJ   Product Code: WFM200SN
Latest application date: 2024-07-05

FCC ID Device Details

FCC ID2BFKJ-WFM200SN
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BFKJ
Product CodeWFM200SN
Applicant BusinessAnna Ambassador LLC d/b/a LootCo 🇺🇸
Related Domains lootcorporation.com
Equipment Class802.11b/g/n Wi-Fi wireless radio module
Test FirmIndustrial Internet Innovation Center (Shanghai)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2024-07-05
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: QOQWFM200 Grant Date: 10/02/20192024-06-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-07-05PDF 1.4 MB
External PhotosExternal Photos2024-07-05PDF 2.6 MB
External PhotosExternal Photos2024-06-18PDF 127.5 KB
Label LocationID Label/Location Info2024-06-18PDF 81 KB
SAR Test Setup PhotosTest Setup Photos2024-07-05PDF 299.9 KB
Test Setup PhotosTest Setup Photos2024-07-05PDF 1.4 MB
Antenna infoTest Report2024-07-05PDF 653.4 KB
SAR test Report_1RF Exposure Info2024-07-05PDF 4.5 MB
SAR test Report_2RF Exposure Info2024-07-05PDF 5 MB
Test ReportTest Report2024-07-05PDF 3.7 MB
CoveredEquipmentLetterAttestation Statements2024-07-05PDF 172.6 KB
LocalRepLetterAttestation Statements2024-07-05PDF 120.2 KB
Authority to Act as AgentCover Letter(s)2024-07-05PDF 95.8 KB
ConfidentialityRequestLetterCover Letter(s)2024-07-05PDF 150.7 KB
Authorization Letter for FCC Change in IDCover Letter(s)2024-06-18PDF 424.2 KB
FCC Statement LetterCover Letter(s)2024-06-18PDF 112.2 KB
RF Exposure InfoRF Exposure Info2024-07-05PDF 5.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 22.3 KB

Application Information

Application IDMDL8nIAD/FT2ozUNsFDSxw==
Final Action Date2024-07-05
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0035180082
ModelWFM200SN
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b/g/n Wi-Fi wireless radio module
Responsible PartyAdeeb Rohani, adeeb@lootcorporation.com , 7276671734
Test FirmZheng Zhongbin, Industrial Internet Innovation Center (Shanghai), zhangyu@3in.org , +86 21 68866880
TCB Emailo.kneip@kl-certification.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device in to specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and§15.31 (k) composite system. Class II permissive change: Enables Portable use case when integrated into LootPaw GPS Tracker of Anna Ambassador LLC d/b/a LootCo model LootPaw GPS Tracker device. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values are:Body-worn 0.11 W/kg; Simultaneous Transmission SAR: 1.20W/kg.

Applications

Application IDDatePurpose
MDL8nIAD/FT2ozUNsFDSxw==2024-07-05Class II permissive change or modification of presently authorized equipment
qB8N5ZnB5sGdlFkcmLhk2w==2024-06-18Change in identification of presently authorized equipment. Original FCC ID: QOQWFM200 Grant Date: 10/02/2019

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.04415C
2412-2462 MHz0.02215C
2412-2462 MHz0.0215C

Grants

TCB Grant - Application qB8N5ZnB5sGdlFkcmLhk2w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany
Date of Grant: 06/18/2024

Application Dated: 06/06/2024
Anna Ambassador LLC d/b/a LootCo
1860 Southwood Lane
Clearwater, FL 33764
 
Attention: Adeeb Rohani

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BFKJ-WFM200SN
Name of Grantee:  Anna Ambassador LLC d/b/a LootCo
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Wi-Fi wireless radio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.044  
15C 2412.0  -  2462.0 0.022  
15C 2412.0  -  2462.0 0.02  

The output power listed is conducted. Single Modular Approval. Compliance of this device inall final product configurations is the responsibility of the Grantee. Installation of this deviceinto specific final products may require a submission of a Class II permissive changeapplication containing data pertinent to RF Exposure, emissions and host / moduleauthentication, or a new application if appropriate. This device is approved for both mobile andportable use with respect to RF exposure compliance. The antenna of this transmitter mustprovide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.Multi-transmitter, supporting simultaneous transmission, configurations have not beenevaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and§15.31 (k) composite system.

EAS Grant - Application qB8N5ZnB5sGdlFkcmLhk2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Anna Ambassador LLC d/b/a LootCo
1860 Southwood Lane
Clearwater, FL 33764
United States
  Date of Grant: 06/18/2024

Application Dated: 06/06/2024
 
Attention: Adeeb Rohani

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BFKJ-WFM200SN
Name of Grantee:  Anna Ambassador LLC d/b/a LootCo
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Wi-Fi wireless radio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.044  
15C 2412.0  -  2462.0 0.022  
15C 2412.0  -  2462.0 0.02  

The output power listed is conducted. Single Modular Approval. Compliance of this device inall final product configurations is the responsibility of the Grantee. Installation of this deviceinto specific final products may require a submission of a Class II permissive changeapplication containing data pertinent to RF Exposure, emissions and host / moduleauthentication, or a new application if appropriate. This device is approved for both mobile andportable use with respect to RF exposure compliance. The antenna of this transmitter mustprovide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.Multi-transmitter, supporting simultaneous transmission, configurations have not beenevaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and§15.31 (k) composite system.



TCB Grant - Application MDL8nIAD/FT2ozUNsFDSxw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  KL-Certification GmbH
Heinrich-Hertz-Allee 7
St. Ingbert, 66386
Germany
Date of Grant: 07/05/2024

Application Dated: 07/04/2024
Anna Ambassador LLC d/b/a LootCo
1860 Southwood Lane
Clearwater, FL 33764
 
Attention: Adeeb Rohani

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BFKJ-WFM200SN
Name of Grantee:  Anna Ambassador LLC d/b/a LootCo
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Wi-Fi wireless radio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.044  
15C 2412.0  -  2462.0 0.022  
15C 2412.0  -  2462.0 0.02  

The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device in to specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and§15.31 (k) composite system.

Class II permissive change: Enables Portable use case when integrated into LootPaw GPS Tracker of Anna Ambassador LLC d/b/a LootCo model LootPaw GPS Tracker device. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values are:Body-worn 0.11 W/kg; Simultaneous Transmission SAR: 1.20W/kg.


EAS Grant - Application MDL8nIAD/FT2ozUNsFDSxw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Anna Ambassador LLC d/b/a LootCo
1860 Southwood Lane
Clearwater, FL 33764
United States
  Date of Grant: 07/05/2024

Application Dated: 07/04/2024
 
Attention: Adeeb Rohani

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BFKJ-WFM200SN
Name of Grantee:  Anna Ambassador LLC d/b/a LootCo
Equipment Class: Digital Transmission System
Notes: 802.11b/g/n Wi-Fi wireless radio module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.044  
15C 2412.0  -  2462.0 0.022  
15C 2412.0  -  2462.0 0.02  

The output power listed is conducted. Single Modular Approval. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device in to specific final products may require a submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host / module authentication, or a new application if appropriate. This device is approved for both mobile and portable use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance defined in this application from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance.Multi-transmitter, supporting simultaneous transmission, configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §15.31(h) and§15.31 (k) composite system.

Class II permissive change: Enables Portable use case when integrated into LootPaw GPS Tracker of Anna Ambassador LLC d/b/a LootCo model LootPaw GPS Tracker device. The antenna(s) used for this transmitter must be installed to provide a minimum separation distance from all persons as specified in the filing and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. The highest reported SAR values are:Body-worn 0.11 W/kg; Simultaneous Transmission SAR: 1.20W/kg.



Mail To: