FCC ID 2BGUG-RDKX5K

RDK X5

by D-ROBOTICS HOLDING LIMITED

Grantee Code: 2BGUG   Product Code: RDKX5K
Latest application date: 2025-02-06

FCC ID Device Details

FCC ID2BGUG-RDKX5K
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BGUG
Product CodeRDKX5K
Applicant BusinessD-ROBOTICS HOLDING LIMITED 🇨🇳
Related Domains d-robotics.cc
Equipment ClassRDK X5
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-02-06
5745-5825 MHzOriginal Equipment2025-02-06
2412-2462 MHzOriginal Equipment2025-02-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-02-06PDF 2.9 MB
Internal PhotosInternal Photos2025-02-06PDF 1.5 MB
External PhotosExternal Photos2025-02-06PDF 1.7 MB
Label & Label LocationID Label/Location Info2025-02-06PDF 578.6 KB
Test Setup PhotosTest Setup Photos2025-02-06PDF 1.3 MB
Test Setup PhotosTest Setup Photos2025-02-06PDF 874 KB
Test Setup PhotosTest Setup Photos2025-02-06PDF 797.4 KB
Antenna SpecificationTest Report2025-02-06PDF 1 MB
Test Report - BLE AppendixTest Report2025-02-06PDF 437.8 KB
Test Report - BLE Part 1Test Report2025-02-06PDF 5.4 MB
Test Report - BLE Part 2Test Report2025-02-06PDF 2.5 MB
Test Report - Wi-Fi AppendixTest Report2025-02-06PDF 1.2 MB
Test Report - Wi-Fi Part 1Test Report2025-02-06PDF 5.3 MB
Test Report - Wi-Fi Part 2Test Report2025-02-06PDF 5.3 MB
Test Report - Wi-Fi Part 3Test Report2025-02-06PDF 5.4 MB
Test Report AppendixTest Report2025-02-06PDF 1.5 MB
Test Report AppendixTest Report2025-02-06PDF 728.1 KB
Test Report Part 1Test Report2025-02-06PDF 5.3 MB
Test Report Part 1Test Report2025-02-06PDF 5.4 MB
Test Report Part 2Test Report2025-02-06PDF 5.5 MB
Test Report Part 2Test Report2025-02-06PDF 5.3 MB
Test Report Part 3Test Report2025-02-06PDF 2 MB
Test Report Part 3Test Report2025-02-06PDF 5.4 MB
Test Report Part 4Test Report2025-02-06PDF 5.4 MB
Test Report Part 5Test Report2025-02-06PDF 5.4 MB
Test Report Part 6Test Report2025-02-06PDF 3.8 MB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2025-02-06PDF 132.1 KB
Attestation LetterAttestation Statements2025-02-06PDF 277.9 KB
US Agent Attestation LetterAttestation Statements2025-02-06PDF 163.4 KB
DoS LetterCover Letter(s)2025-02-06PDF 202.1 KB
FCC Agent Authorization LetterCover Letter(s)2025-02-06PDF 62.2 KB
FCC Long-term Confidential RequestCover Letter(s)2025-02-06PDF 79 KB
Module Approval LetterCover Letter(s)2025-02-06PDF 265.5 KB
RF ExposureRF Exposure Info2025-02-06PDF 262.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 325.7 KB
Schematics Metadata onlySchematicsPDF 660 KB
Circuit Description Metadata onlyOperational DescriptionPDF 153.1 KB
Software Security Description Metadata onlySDR Software/Security Info.PDF 549.7 KB

Application Information

Application IDkY0jz+MvWmm1+HmBUSw+nA==
Final Action Date2025-02-06
Application PurposeOriginal Equipment
Applicant FRN0035518919
ModelRDKX5K
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRDK X5
Responsible PartyChunxu Hu, developer@d-robotics.cc , 00852-29232379
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

Applications

Application IDDatePurpose
kY0jz+MvWmm1+HmBUSw+nA==2025-02-06Original Equipment
eio7wC++wjDGP0K+stSYog==2025-02-06Original Equipment
Vjaq/VZ83UflYez6n+7otg==2025-02-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002700015CCC
2402-2480 MHz0.002915CCC
2412-2462 MHz0.169415CCC
5180-5240 MHz0.081815ECC
5745-5825 MHz0.052715ECC

Grants

TCB Grant - Application Vjaq/VZ83UflYez6n+7otg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/06/2025

Application Dated: 02/06/2025
D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM
PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Digital Transmission System
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  
CC 15C 2412.0  -  2462.0 0.1694  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Vjaq/VZ83UflYez6n+7otg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
  Date of Grant: 02/06/2025

Application Dated: 02/06/2025
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Digital Transmission System
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  
CC 15C 2412.0  -  2462.0 0.1694  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kY0jz+MvWmm1+HmBUSw+nA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/06/2025

Application Dated: 02/06/2025
D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM
PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kY0jz+MvWmm1+HmBUSw+nA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
  Date of Grant: 02/06/2025

Application Dated: 02/06/2025
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eio7wC++wjDGP0K+stSYog==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 02/06/2025

Application Dated: 02/06/2025
D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM
PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0818  
CC 15E 5745.0  -  5825.0 0.0527  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40/80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eio7wC++wjDGP0K+stSYog==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

D-ROBOTICS HOLDING LIMITED
SUITE 603,6/F LAWS COMM PLAZA 788 CHEUNG SHA WAN RD KLN
HONG KONG,
China
  Date of Grant: 02/06/2025

Application Dated: 02/06/2025
 
Attention: Chunxu Hu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BGUG-RDKX5K
Name of Grantee:  D-ROBOTICS HOLDING LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RDK X5
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0818  
CC 15E 5745.0  -  5825.0 0.0527  

Modular Approval. Output Power listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40/80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: