FCC ID 2BH7FEAP775WALL

BE11000 Wall Plate Wi-Fi 7 Access Point

by TP-Link Systems Inc.

Grantee Code: 2BH7F   Product Code: EAP775WALL
Latest application date: 2025-11-18

FCC ID Device Details

FCC ID2BH7FEAP775WALL
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BH7F
Product CodeEAP775WALL
Applicant BusinessTP-Link Systems Inc. 🇺🇸
Related Domains tp-link.com mrt-cert.com
Equipment ClassBE11000 Wall Plate Wi-Fi 7 Access Point
Test FirmMRT Technology (Taiwan) Co.,Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
6115-7095 MHzOriginal Equipment2025-11-18
6115-7095 MHzOriginal Equipment2025-11-18
5745-5825 MHzOriginal Equipment2025-11-18
2412-2462 MHzOriginal Equipment2025-11-18

Exhibits

DocumentTypeAvailableFile
EAP775-Wall-Install GuideUsers Manual2025-11-18PDF 832.2 KB
EAP775-Wall_Overview of Regulatory ComplianceUsers Manual2025-11-18PDF 950.5 KB
2509TW0116-UI Internal PhotographInternal Photos2025-11-18PDF 2.4 MB
2509TW0116-UE External PhotographExternal Photos2025-11-18PDF 1 MB
EAP775-Wall_LabelID Label/Location Info2025-11-18PDF 694.8 KB
2509TW0116-UT Test Setup PhotographTest Setup Photos2025-11-18PDF 942.8 KB
R25S1056092-UTTest Setup Photos2025-11-18PDF 730.8 KB
2509TW0116-U1 FCC Part 15.247 BLE_V1.0Test Report2025-11-18PDF 4.7 MB
2509TW0116-U2 FCC Part 15.247 Wi-Fi 2.4G_V1.0_Part1Test Report2025-11-18PDF 5.3 MB
2509TW0116-U2 FCC Part 15.247 Wi-Fi 2.4G_V1.0_Part2Test Report2025-11-18PDF 5.5 MB
2509TW0116-U2 FCC Part 15.247 Wi-Fi 2.4G_V1.0_Part3Test Report2025-11-18PDF 2.3 MB
2509TW0116-U3 FCC Part 15.407 Wi-Fi 5G_V1.0_Part1Test Report2025-11-18PDF 5.5 MB
2509TW0116-U3 FCC Part 15.407 Wi-Fi 5G_V1.0_Part2Test Report2025-11-18PDF 5 MB
2509TW0116-U3 FCC Part 15.407 Wi-Fi 5G_V1.0_Part3Test Report2025-11-18PDF 5 MB
2509TW0116-U3 FCC Part 15.407 Wi-Fi 5G_V1.0_Part4Test Report2025-11-18PDF 5.5 MB
2509TW0116-U3 FCC Part 15.407 Wi-Fi 5G_V1.0_Part5Test Report2025-11-18PDF 3.6 MB
EAP775-Wall-BLE AUT ReportTest Report2025-11-18PDF 458.4 KB
EAP775-Wall-Wi-Fi Composite Gain Test ReportTest Report2025-11-18PDF 931.3 KB
R25S1056092-U201_6G-V01_Part1Test Report2025-11-18PDF 5.5 MB
R25S1056092-U201_6G-V01_Part2Test Report2025-11-18PDF 5.2 MB
R25S1056092-U201_6G-V01_Part3Test Report2025-11-18PDF 5.1 MB
R25S1056092-U201_6G-V01_Part4Test Report2025-11-18PDF 5.3 MB
R25S1056092-U201_6G-V01_Part5Test Report2025-11-18PDF 5.2 MB
R25S1056092-U201_6G-V01_Part6Test Report2025-11-18PDF 5.4 MB
R25S1056092-U201_6G-V01_Part7Test Report2025-11-18PDF 5.1 MB
R25S1056092-U201_6G-V01_Part8Test Report2025-11-18PDF 5.5 MB
R25S1056092-U201_6G-V01_Part9Test Report2025-11-18PDF 1.5 MB
ACB-FORM-FCC-Application-Letters-Covered-List-AttestationAttestation Statements2025-11-18PDF 396.4 KB
ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process_RevAttestation Statements2025-11-18PDF 101 KB
EAP775-Wall-FCC 6ID letterAttestation Statements2025-11-18PDF 228.8 KB
EAP775-Wall-FCC 6PP letterAttestation Statements2025-11-18PDF 249.6 KB
EAP775-Wall-FCC Attestation LetterAttestation Statements2025-11-18PDF 174.9 KB
EAP775-Wall-Declaration of Frequency StabilityCover Letter(s)2025-11-18PDF 145.1 KB
EAP775-Wall-FCC Confidentiality Request Letter-Long TermCover Letter(s)2025-11-18PDF 178.8 KB
EAP775-Wall-FCC Declaration of AuthorizationCover Letter(s)2025-11-18PDF 154.1 KB
EAP775-Wall-FCC Declaration of ConformityCover Letter(s)2025-11-18PDF 173.1 KB
EAP775-Wall-Non-SDR letterCover Letter(s)2025-11-18PDF 192 KB
2509TW0116-U5 FCC RF Exposure Report_V1.0RF Exposure Info2025-11-18PDF 544.1 KB
Confidential_EAP775-Wall_Block Diagram Metadata onlyBlock DiagramPDF 347.4 KB
EAP775-Wall_Schematic-A Metadata onlySchematicsPDF 1.7 MB
EAP775-Wall_Schematic-B Metadata onlySchematicsPDF 524.3 KB
Confidential_EAP775-Wall_Operation Description-FCC Metadata onlyOperational DescriptionPDF 378 KB
EAP775-Wall-Software Security Requirements Cover Letter Metadata onlySDR Software/Security Info.PDF 194 KB

Application Information

Application IDsHF/ppGv4unAoRyojFZHOg==
Final Action Date2025-11-18
Application PurposeOriginal Equipment
Applicant FRN0035788017
ModelEAP775WALL
Frequency Range6115-7095 MHz
Equipment Class6ID - 15E 6 GHz Low Power Indoor Access Point
Device DescriptionBE11000 Wall Plate Wi-Fi 7 Access Point
Responsible PartySarah Wang, certification@tp-link.com , 6263330234
Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Non-Technical ContactMarlin Chen, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com , 86-512-66308358
Test FirmChenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentDoes not apply
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
sHF/ppGv4unAoRyojFZHOg==2025-11-18Original Equipment
ZhjR1Q+Lj5uf2xf9jTVKxw==2025-11-18Original Equipment
FvO0htlNMZXUs3KN4e1JfQ==2025-11-18Original Equipment
AefFPLwnPl46A8DEaKAa/Q==2025-11-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
6115-7095 MHz0.322115ECC EP MO
5180-5240 MHz0.223415ECC MO
5260-5320 MHz0.221315ECC MO ND
5500-5720 MHz0.222815ECC MO ND
5745-5825 MHz0.222315ECC MO
5250 MHz0.108915ECC MO ND
2402-2480 MHz0.050915CCC
2412-2462 MHz0.222315CCC MO

Grants

TCB Grant - Application ZhjR1Q+Lj5uf2xf9jTVKxw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/18/2025

Application Dated: 11/18/2025
TP-Link Systems Inc.
10 Mauchly, Irvine, CA 92618
Irvine, CA 92618
 
Attention: Sarah Wang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BH7FEAP775WALL
Name of Grantee:  TP-Link Systems Inc.
Equipment Class: 15E 6 GHz Subordinate Indoor Device
Notes: BE11000 Wall Plate Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 6115.0  -  7095.0 0.3221  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz, 80MHz, 160MHz and 320MHz bandwidth modes in 6GHz WLAN transmitter. It also contains BT LE, 2.4GHz and 5GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application sHF/ppGv4unAoRyojFZHOg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/18/2025

Application Dated: 11/18/2025
TP-Link Systems Inc.
10 Mauchly, Irvine, CA 92618
Irvine, CA 92618
 
Attention: Sarah Wang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BH7FEAP775WALL
Name of Grantee:  TP-Link Systems Inc.
Equipment Class: 15E 6 GHz Low Power Indoor Access Point
Notes: BE11000 Wall Plate Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 6115.0  -  7095.0 0.3221  

Power Output listed is EIRP. This device is restricted to indoor use only. Device is an 802.11ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz, 80MHz, 160MHz and 320MHz bandwidth modes in 6GHz WLAN transmitter. It also contains BT LE, 2.4GHz and 5GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FvO0htlNMZXUs3KN4e1JfQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/18/2025

Application Dated: 11/18/2025
TP-Link Systems Inc.
10 Mauchly, Irvine, CA 92618
Irvine, CA 92618
 
Attention: Sarah Wang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BH7FEAP775WALL
Name of Grantee:  TP-Link Systems Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BE11000 Wall Plate Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.2234  
CC MO ND 15E 5260.0  -  5320.0 0.2213  
CC MO ND 15E 5500.0  -  5720.0 0.2228  
CC MO 15E 5745.0  -  5825.0 0.2223  
CC MO ND 15E 5250.0  -  5250.0 0.1089  

Power Output listed is conducted. Device is an 802.11a/n/ac/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20MHz, 40MHz, 80MHz, 160 MHz and 240 MHz bandwidth modes in 5GHz WLAN transmitter and it also contains BT-LE, 2.4GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application AefFPLwnPl46A8DEaKAa/Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
313 Park Avenue Suite 300
Falls Church, VA 22046
Date of Grant: 11/18/2025

Application Dated: 11/18/2025
TP-Link Systems Inc.
10 Mauchly, Irvine, CA 92618
Irvine, CA 92618
 
Attention: Sarah Wang ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BH7FEAP775WALL
Name of Grantee:  TP-Link Systems Inc.
Equipment Class: Digital Transmission System
Notes: BE11000 Wall Plate Wi-Fi 7 Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0509  
CC MO 15C 2412.0  -  2462.0 0.2223  

Power Output listed is conducted. Device is an 802.11b/g/n/ax/be device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes in 2.4GHz WLAN transmitter and it also contains 5GHz and 6GHz WLAN transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.