FCC ID 2BLKE-SOM7981

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 11/13/2024 Application Dated: 11/12/2024

OpenEmbed M&C

408,Building 3,Minle Industrial Zone,

Minle Community,Minzhi Street,Longhua District,

Shenzhen, China

Attention: Wenming Wang , CEO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BLKE-SOM7981
Name of Grantee:	OpenEmbed M&C
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wi-Fi module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.1294
CC MO ND	15E	5260.0  -  5320.0	0.0993
CC MO ND	15E	5500.0  -  5720.0	0.1047
CC MO	15E	5745.0  -  5825.0	0.1517

Single Modular Approval. Output power listed is maximum combined conducted power. The device is a 3x3 MIMO as is described in the filing. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz, 40MHz, 80MHz and 160MHz signal bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

OpenEmbed M&C 408,Building 3,Minle Industrial Zone, Minle Community,Minzhi Street,Longhua District, Shenzhen, China

Date of Grant: 11/13/2024 Application Dated: 11/12/2024

Attention: Wenming Wang , CEO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BLKE-SOM7981
Name of Grantee:	OpenEmbed M&C
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Wi-Fi module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.1294
CC MO ND	15E	5260.0  -  5320.0	0.0993
CC MO ND	15E	5500.0  -  5720.0	0.1047
CC MO	15E	5745.0  -  5825.0	0.1517

Single Modular Approval. Output power listed is maximum combined conducted power. The device is a 3x3 MIMO as is described in the filing. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz, 40MHz, 80MHz and 160MHz signal bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application hbx9MDbPp9ngjEizLSxh2A==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

LGAI Technological Center S.A. (APPLUS) Ronda de la Font del Carme, s/n <BR>P.O. Box 08193, Barcelona, Spain

Date of Grant: 11/13/2024 Application Dated: 11/12/2024

OpenEmbed M&C

408,Building 3,Minle Industrial Zone,

Minle Community,Minzhi Street,Longhua District,

Shenzhen, China

Attention: Wenming Wang , CEO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BLKE-SOM7981
Name of Grantee:	OpenEmbed M&C
Equipment Class:	Digital Transmission System
Notes:	Wi-Fi module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.4498

Single Modular Approval. Output power listed is maximum combined conducted power. The device is a 2x2 MIMO as is described in the filing. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz and 40MHz signal bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

OpenEmbed M&C 408,Building 3,Minle Industrial Zone, Minle Community,Minzhi Street,Longhua District, Shenzhen, China

Date of Grant: 11/13/2024 Application Dated: 11/12/2024

Attention: Wenming Wang , CEO

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2BLKE-SOM7981
Name of Grantee:	OpenEmbed M&C
Equipment Class:	Digital Transmission System
Notes:	Wi-Fi module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.4498

Single Modular Approval. Output power listed is maximum combined conducted power. The device is a 2x2 MIMO as is described in the filing. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The device contains 20MHz and 40MHz signal bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: