FCC ID 2BMJMFG8002AC
4G LTE WIFI ROUTER
by Elevator Communication Specialists INC.(DBA Essential Communication Services)
Grantee Code: 2BMJM Product Code: FG8002AC
Latest application date: 2025-01-26
FCC ID Device Details
| FCC ID | 2BMJMFG8002AC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BMJM |
| Product Code | FG8002AC |
| Applicant Business | Elevator Communication Specialists INC.(DBA Essential Communication Services) 🇺🇸 |
| Related Domains | |
| Equipment Class | 4G LTE WIFI ROUTER |
| Test Firm | SHENZHEN NCT TESTING TECHNOLOGY CO., LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2025-01-26 |
| 1860-1900 MHz | Original Equipment | 2025-01-26 |
| 2422-2452 MHz | Original Equipment | 2025-01-26 |
Exhibits
Application Information
| Application ID | fblwFsUbuOV9TVRA2sXMhg== |
|---|---|
| Final Action Date | 2025-01-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0036357168 |
| Model | FG8002AC |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 4G LTE WIFI ROUTER |
| Responsible Party | Philip Wynn, Pwynn@get-ecs.com |
| Technical Contact | Elevator Communication Specialists INC. (DBA Essen, Pwynn@get-ecs.com |
| Test Firm | Henry Wang, SHENZHEN NCT TESTING TECHNOLOGY CO., LTD., Henry@nct-testing.com |
| TCB Email | certification@micomlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fblwFsUbuOV9TVRA2sXMhg== | 2025-01-26 | Original Equipment |
| RIrn9Ed1UQ4+U/dUfcbY+w== | 2025-01-26 | Original Equipment |
| 3/U3PRl4A8+2OBkBfoZxJA== | 2025-01-26 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 665.5-695.5 MHz | 0.5521 | 2.5ppm | 4M55G7D | 27 | |
| 665.5-695.5 MHz | 0.4198 | 2.5ppm | 4M55W7D | 27 | |
| 670.5-690.5 MHz | 0.5272 | 2.5ppm | 18M1G7D | 27 | |
| 670.5-690.5 MHz | 0.4872 | 2.5ppm | 18M1W7D | 27 | |
| 699.7-715.3 MHz | 0.5728 | 2.5ppm | 1M08G7D | 27 | |
| 704-711 MHz | 0.4943 | 2.5ppm | 8M92G7D | 27 | |
| 704-711 MHz | 0.4809 | 2.5ppm | 8M94G7D | 27 | |
| 704-711 MHz | 0.4188 | 2.5ppm | 8M93W7D | 27 | |
| 779.5 MHz | 0.4518 | 2.5ppm | 4M47G7D | 27 | |
| 779.5-784.5 MHz | 0.3673 | 2.5ppm | 4M46W7D | 27 | |
| 782 MHz | 0.3963 | 2.5ppm | 8M93G7D | 27 | |
| 782 MHz | 0.3199 | 2.5ppm | 8M92W7D | 27 | |
| 790.5-795.5 MHz | 0.3381 | 2.5ppm | 4M48G7D | 27 | |
| 790.5-795.5 MHz | 0.2483 | 2.5ppm | 4M46W7D | 27 | |
| 793 MHz | 0.3134 | 2.5ppm | 8M92G7D | 27 | |
| 793 MHz | 0.2307 | 2.5ppm | 8M92W7D | 27 | |
| 824.7-848.3 MHz | 0.2291 | 2.5ppm | 1M08W7D | 22H | |
| 824.7-848.3 MHz | 0.289 | 2.5ppm | 1M08G7D | 22H | |
| 829-844 MHz | 0.2767 | 2.5ppm | 8M95G7D | 22H | |
| 829-844 MHz | 0.2302 | 2.5ppm | 8M96W7D | 22H | |
| 1710.7-1779.3 MHz | 0.2938 | 2.5ppm | 1M08G7D | 27 | |
| 1710.7-1779.3 MHz | 0.2218 | 2.5ppm | 1M08W7D | 27 | |
| 1710.7-1754.3 MHz | 0.3041 | 2.5ppm | 1M08G7D | 27 | |
| 1710.7-1754.3 MHz | 0.2355 | 2.5ppm | 1M08W7D | 27 | |
| 1711.5-1778.5 MHz | 0.2339 | 2.5ppm | 2M68W7D | 27 | |
| 1720-1770 MHz | 0.302 | 2.5ppm | 17M8G7D | 27 | |
| 1720-1770 MHz | 0.2333 | 2.5ppm | 18M8W7D | 27 | |
| 1720-1745 MHz | 0.2938 | 2.5ppm | 17M8G7D | 27 | |
| 1720-1745 MHz | 0.2317 | 2.5ppm | 17M8W7D | 27 | |
| 1860-1900 MHz | 0.1901 | 2.5ppm | 17M8W7D | 24E | |
| 2412-2462 MHz | 0.134 | 15C | CC | ||
| 2422-2452 MHz | 0.1528 | 15C | CC | ||
| 5180-5240 MHz | 0.1368 | 15E | CC, MO | ||
| 5745-5825 MHz | 0.0684 | 15E | CC, MO |
Grants
TCB Grant - Application RIrn9Ed1UQ4+U/dUfcbY+w==
unavailable
EAS Grant - Application RIrn9Ed1UQ4+U/dUfcbY+w==
unavailable
TCB Grant - Application fblwFsUbuOV9TVRA2sXMhg==
unavailable
EAS Grant - Application fblwFsUbuOV9TVRA2sXMhg==
unavailable
TCB Grant - Application 3/U3PRl4A8+2OBkBfoZxJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/26/2025 Application Dated: 01/26/2025 |
| Elevator Communication Specialists INC.(DBA Essential Communication Services) |
| 26 site c-6rd,Suite b, |
| Freeport, FL 32439 |
| Attention: Philip Wynn |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BMJMFG8002AC |
| Name of Grantee: | Elevator Communication Specialists INC.(DBA Essential Communication Services) |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G LTE WIFI ROUTER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.134 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1528 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3/U3PRl4A8+2OBkBfoZxJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Elevator Communication Specialists INC.(DBA Essential Communication Services) 26 site c-6rd,Suite b, Freeport, FL 32439 United States |
Date of Grant: 01/26/2025 Application Dated: 01/26/2025 |
| Attention: Philip Wynn |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BMJMFG8002AC |
| Name of Grantee: | Elevator Communication Specialists INC.(DBA Essential Communication Services) |
| Equipment Class: | Digital Transmission System |
| Notes: | 4G LTE WIFI ROUTER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.134 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1528 |
| Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |