FCC ID 2BMPT-284B-N1V1BY

Wireless IP Camera

by Zhuhai Glory Technology Co., Ltd

Grantee Code: 2BMPT   Product Code: 284BN1V1BY
Latest application date: 2025-01-15

FCC ID Device Details

FCC ID2BMPT-284B-N1V1BY
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2BMPT
Product Code284BN1V1BY
Applicant BusinessZhuhai Glory Technology Co., Ltd 🇨🇳
Related Domains theglorytech.com
Equipment ClassWireless IP Camera
Test FirmShenzhen Anbotek Compliance Laboratory Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2025-01-15
2412-2462 MHzOriginal Equipment2025-01-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-07-14PDF 638.5 KB
User manualUsers Manual2025-07-14PDF 638.5 KB
Internal PhotosInternal Photos2025-07-14PDF 3.1 MB
Internal photosInternal Photos2025-07-14PDF 3.1 MB
External PhotographExternal Photos2025-07-14PDF 985 KB
ExternalPhotosExternal Photos2025-07-14PDF 985 KB
LabelID Label/Location Info2025-01-15PDF 85.2 KB
TEST SETUP PHOTOSTest Setup Photos2025-07-14PDF 649 KB
Test Setup PhotosTest Setup Photos2025-07-14PDF 649 KB
Antenna test reportTest Report2025-01-15PDF 685.9 KB
FCC-RLAN Appendix DataTest Report2025-01-15PDF 4.5 MB
FCC-WLAN Appendix DataTest Report2025-01-15PDF 2.6 MB
ReportFCC15.247 Wi-Fi2.4GTest Report2025-01-15PDF 1.2 MB
WHL-L28W ReportFCC15.407 Wi-Fi5.2&5.3&5.6&5.8GTest Report2025-01-15PDF 1.5 MB
2.911 (d)(5)(i) Certification Equipment Type v1.2Attestation Statements2025-01-15PDF 95.2 KB
2.911 (d)(5)(i)CertificiationApplicantv1.2Attestation Statements2025-01-15PDF 95.2 KB
2.911 (d)(5)(ii)CertificationEquipmentTypev1.2Attestation Statements2025-01-15PDF 90.2 KB
2.911 (d)(7)USAgentforServiceofProcessv1.3Attestation Statements2025-01-15PDF 145.2 KB
2.911_(d)(5)(ii) Certification Equipment Type v1.2_Revision 01Attestation Statements2025-01-15PDF 90.2 KB
2.911_(d)(7) US Agent for Service of Process v1(1)Attestation Statements2025-01-15PDF 145.2 KB
Agent Authorization Rev 1.0Cover Letter(s)2025-01-15PDF 62.7 KB
AgentAuthorizationRev1.0Cover Letter(s)2025-01-15PDF 62.7 KB
Applicant authorized agent letterCover Letter(s)2025-01-15PDF 61.1 KB
FCC Declaration on Model DifferencesCover Letter(s)2025-01-15PDF 61.3 KB
FCC Long&shortTermOnlyConfidentialityRequestRev4.0Cover Letter(s)2025-01-15PDF 62.7 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2025-01-15PDF 91.5 KB
MPERF Exposure Info2025-01-15PDF 298.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 116.8 KB
Block diagram Metadata onlyBlock DiagramPDF 116.8 KB
SCH Metadata onlySchematicsPDF 593.5 KB
OP Metadata onlyOperational DescriptionPDF 60.1 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security Info.PDF 145.1 KB

Application Information

Application IDc6pL6sXFgnxaNyVjieJKmA==
Final Action Date2025-01-15
Application PurposeOriginal Equipment
Applicant FRN0036385862
Model284B-N1V1BY
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless IP Camera
Responsible PartyEddie Tsang, Legal Representative, eddie@theglorytech.com , 00-86-13926910693
Technical ContactZhuhai Glory Technology Co., Ltd, zhuxuanpeng@theglorytech.com
Test FirmJeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 13798230942
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/14/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
c6pL6sXFgnxaNyVjieJKmA==2025-01-15Original Equipment
YRqG9AmNv9ube1BECML7Lg==2025-01-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.038500015CCC
5180-5240 MHz0.031915ECC
5260-5320 MHz0.036215ECC, ND
5500-5700 MHz0.033415ECC, ND
5745-5825 MHz0.03315ECC

Grants

TCB Grant - Application YRqG9AmNv9ube1BECML7Lg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/15/2025

Application Dated: 01/15/2025
Zhuhai Glory Technology Co., Ltd
8F, Bldg 7, No. 178 Dingxing Road, Tangjiawan Town
Zhuhai,Guangdong, 519000
China
 
Attention: Eddie Tsang , Legal Representative

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BMPT-284B-N1V1BY
Name of Grantee:  Zhuhai Glory Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Wireless IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0385  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YRqG9AmNv9ube1BECML7Lg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zhuhai Glory Technology Co., Ltd
8F, Bldg 7, No. 178 Dingxing Road, Tangjiawan Town
Zhuhai,Guangdong, 519000
China
  Date of Grant: 01/15/2025

Application Dated: 01/15/2025
 
Attention: Eddie Tsang , Legal Representative

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BMPT-284B-N1V1BY
Name of Grantee:  Zhuhai Glory Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Wireless IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0385  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application c6pL6sXFgnxaNyVjieJKmA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 01/15/2025

Application Dated: 01/15/2025
Zhuhai Glory Technology Co., Ltd
8F, Bldg 7, No. 178 Dingxing Road, Tangjiawan Town
Zhuhai,Guangdong, 519000
China
 
Attention: Eddie Tsang , Legal Representative

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BMPT-284B-N1V1BY
Name of Grantee:  Zhuhai Glory Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0319  
CC ND 15E 5260.0  -  5320.0 0.0362  
CC ND 15E 5500.0  -  5700.0 0.0334  
CC 15E 5745.0  -  5825.0 0.033  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application c6pL6sXFgnxaNyVjieJKmA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zhuhai Glory Technology Co., Ltd
8F, Bldg 7, No. 178 Dingxing Road, Tangjiawan Town
Zhuhai,Guangdong, 519000
China
  Date of Grant: 01/15/2025

Application Dated: 01/15/2025
 
Attention: Eddie Tsang , Legal Representative

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2BMPT-284B-N1V1BY
Name of Grantee:  Zhuhai Glory Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0319  
CC ND 15E 5260.0  -  5320.0 0.0362  
CC ND 15E 5500.0  -  5700.0 0.0334  
CC 15E 5745.0  -  5825.0 0.033  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: