FCC ID 2BNHM-XS01
Interactive Smart Board
by Guangzhou Anning Technology Co., Ltd.
Grantee Code: 2BNHM Product Code: XS01
Latest application date: 2025-01-23
FCC ID Device Details
| FCC ID | 2BNHM-XS01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BNHM |
| Product Code | XS01 |
| Applicant Business | Guangzhou Anning Technology Co., Ltd. 🇨🇳 |
| Equipment Class | Interactive Smart Board |
| Test Firm | Shenzhen ETR Standard Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2A6US-XS01 Grant Date: 06/17/2022 | 2025-01-23 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2A6US-XS01 Grant Date: 06/17/2022 | 2025-01-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2025-07-23 | PDF 421.1 KB |
| Label and Location | ID Label/Location Info | 2025-01-23 | PDF 150.3 KB |
| 2.911 (d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2025-01-23 | PDF 505.7 KB |
| 2.911 (d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2025-01-23 | PDF 313.5 KB |
| 2.911 (d)(7)USAgentforServiceofProcessv1.2 | Attestation Statements | 2025-01-23 | PDF 210.6 KB |
| AgentAuthorizationRev1.0 | Cover Letter(s) | 2025-01-23 | PDF 12.5 KB |
| FCC Authorization from Original Grantee for ID change V1.1 | Cover Letter(s) | 2025-01-23 | PDF 119.1 KB |
| FCC Long&shortTermOnlyConfidentialityRequestRev4.0 | Cover Letter(s) | 2025-01-23 | PDF 114.3 KB |
| FCC Request for change in ID Rev 2.1 | Cover Letter(s) | 2025-01-23 | PDF 128.8 KB |
Application Information
| Application ID | 1cLN4rkfvapESOl69wZQXg== |
|---|---|
| Final Action Date | 2025-01-23 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2A6US-XS01 Grant Date: 06/17/2022 |
| Applicant FRN | 0036531549 |
| Model | XS01 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Interactive Smart Board |
| Responsible Party | bill Xiong, gzandz@163.com  , 18102513432 |
| Technical Contact | Guangzhou Anning Technology Co., Ltd., gzandz@163.com |
| Test Firm | Smith Chen, Shenzhen ETR Standard Technology Co., Ltd., etr802@etrtest.com  , +86 755-85259392 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 07/23/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 1cLN4rkfvapESOl69wZQXg== | 2025-01-23 | Change in identification of presently authorized equipment. Original FCC ID: 2A6US-XS01 Grant Date: 06/17/2022 |
| /Kcvhul04c6fbuO4n3kbhQ== | 2025-01-23 | Change in identification of presently authorized equipment. Original FCC ID: 2A6US-XS01 Grant Date: 06/17/2022 |
Equipment Authorization
Grants
TCB Grant - Application 1cLN4rkfvapESOl69wZQXg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/23/2025 Application Dated: 01/23/2025 |
| Guangzhou Anning Technology Co., Ltd. |
| Room 20572, 2nd Floor, No. 30 |
| Lianxi Road, Tianhe District, |
| Guangzhou, China |
| Attention: bill Xiong |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BNHM-XS01 |
| Name of Grantee: | Guangzhou Anning Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Interactive Smart Board |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0526 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1cLN4rkfvapESOl69wZQXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Anning Technology Co., Ltd. Room 20572, 2nd Floor, No. 30 Lianxi Road, Tianhe District, Guangzhou, China |
Date of Grant: 01/23/2025 Application Dated: 01/23/2025 |
| Attention: bill Xiong |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BNHM-XS01 |
| Name of Grantee: | Guangzhou Anning Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Interactive Smart Board |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0015 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0526 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/23/2025 Application Dated: 01/23/2025 |
| Guangzhou Anning Technology Co., Ltd. |
| Room 20572, 2nd Floor, No. 30 |
| Lianxi Road, Tianhe District, |
| Guangzhou, China |
| Attention: bill Xiong |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BNHM-XS01 |
| Name of Grantee: | Guangzhou Anning Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Interactive Smart Board |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0209 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0232 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /Kcvhul04c6fbuO4n3kbhQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou Anning Technology Co., Ltd. Room 20572, 2nd Floor, No. 30 Lianxi Road, Tianhe District, Guangzhou, China |
Date of Grant: 01/23/2025 Application Dated: 01/23/2025 |
| Attention: bill Xiong |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BNHM-XS01 |
| Name of Grantee: | Guangzhou Anning Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Interactive Smart Board |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0209 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0232 |
| Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |