FCC ID 2BO3LETWMCBSL01
RF Module
by LG Electronics Inc.
Grantee Code: 2BO3L Product Code: ETWMCBSL01
Latest application date: 2026-08-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-08-27 |
| 2412-2462 MHz | Original Equipment | 2026-07-27 |
| 5745-5825 MHz | Original Equipment | 2026-07-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| ETWMCBSL01_Label & Location | ID Label/Location Info | 2026-07-27 | PDF 336.1 KB |
| ETWMCBSL01 [DTS] FCC C2PC Test Report | Test Report | 2026-08-27 | PDF 3.9 MB |
| ETWMCBSL01 [MPE] FCC Test Report | RF Exposure Info | 2026-08-27 | PDF 809.4 KB |
| ETWMCBSL01 [BT LE] FCC Test Report | Test Report | 2026-07-27 | PDF 5.3 MB |
| ETWMCBSL01 [DFS] FCC Test Report | Test Report | 2026-07-27 | PDF 3.2 MB |
| ETWMCBSL01 [DTS] FCC Test Report | Test Report | 2026-07-27 | PDF 5 MB |
| ETWMCBSL01 [Thread] FCC Test Report | Test Report | 2026-07-27 | PDF 3.4 MB |
| ETWMCBSL01 [UNII] FCC Test Report_Part1 | Test Report | 2026-07-27 | PDF 5 MB |
| ETWMCBSL01 [UNII] FCC Test Report_Part2 | Test Report | 2026-07-27 | PDF 1.6 MB |
| ETWMCBSL01_AUT Report (Door bell Thread) | Test Report | 2026-07-27 | PDF 652.6 KB |
| ETWMCBSL01_AUT Report (Door bell WIFI-1) | Test Report | 2026-07-27 | PDF 764.4 KB |
| ETWMCBSL01_AUT Report (Door bell WIFI-2) | Test Report | 2026-07-27 | PDF 778 KB |
| ETWMCBSL01_AUT Report (Outdoor Thread) | Test Report | 2026-07-27 | PDF 715 KB |
| ETWMCBSL01_AUT Report (Outdoor WIFI-1) | Test Report | 2026-07-27 | PDF 976.9 KB |
| ETWMCBSL01_AUT Report (Outdoor WIFI-2) | Test Report | 2026-07-27 | PDF 951.1 KB |
| 2BO3LETWMCBSL01_FCC Covered List Attestation | Attestation Statements | 2026-08-27 | PDF 373.2 KB |
| 2BO3LETWMCBSL01_FCC Modular Approval Attestation | Attestation Statements | 2026-08-27 | PDF 911.8 KB |
| 2BO3LETWMCBSL01_FCC U.S. Agent for Service of Process Attestation | Attestation Statements | 2026-08-27 | PDF 414.2 KB |
| 2BO3LETWMCBSL01_FCC Covered List Attestation | Attestation Statements | 2026-07-27 | PDF 280 KB |
| 2BO3LETWMCBSL01_FCC Modular Approval Attestation | Attestation Statements | 2026-07-27 | PDF 811.3 KB |
| 2BO3LETWMCBSL01_FCC U.S. Agent for Service of Process Attestation | Attestation Statements | 2026-07-27 | PDF 312 KB |
| 2BO3LETWMCBSL01_Declaration for no non-US channel operation | Cover Letter(s) | 2026-08-27 | PDF 212.4 KB |
| 2BO3LETWMCBSL01_FCC Agent Authorization Letter | Cover Letter(s) | 2026-08-27 | PDF 463.7 KB |
| 2BO3LETWMCBSL01_FCC Class II Permissive Change Letter | Cover Letter(s) | 2026-08-27 | PDF 307.8 KB |
| 2BO3LETWMCBSL01_FCC Confidentiality Request Letter | Cover Letter(s) | 2026-08-27 | PDF 606.1 KB |
| 2BO3LETWMCBSL01_Declaration for no non-US channel operation | Cover Letter(s) | 2026-07-27 | PDF 178.3 KB |
| 2BO3LETWMCBSL01_FCC Agent Authorization Letter | Cover Letter(s) | 2026-07-27 | PDF 378.2 KB |
| 2BO3LETWMCBSL01_FCC Confidentiality Request Letter | Cover Letter(s) | 2026-07-27 | PDF 397.4 KB |
| ETWMCBSL01_User_Manual_R1 Metadata only | Users Manual | 2027-01-23 | PDF 673.9 KB |
| ETWMCBSL01_User_Manual_R2 Metadata only | Users Manual | 2027-01-23 | PDF 673.9 KB |
| ETWMCBSL01 INTERNAL PHOTO Metadata only | Internal Photos | 2027-01-23 | PDF 4.5 MB |
| ETWMCBSL01 EXTERNAL PHOTO_R1 Metadata only | External Photos | 2027-01-23 | PDF 1.7 MB |
| ETWMCBSL01 Annex A_Test Setup Photo Metadata only | Test Setup Photos | 2027-02-23 | PDF 2.7 MB |
| ETWMCBSL01 Annex A_Test Setup Photo Metadata only | Test Setup Photos | 2027-01-23 | PDF 2.2 MB |
| ETWMCBSL01_Block Diagram Metadata only | Block Diagram | PDF 519.8 KB | |
| ETWMCBSL01_Schematics Diagram Metadata only | Schematics | PDF 1.1 MB | |
| ETWMCBSL01_Operational Description Metadata only | Operational Description | PDF 1.1 MB | |
| ETWMCBSL01_Operational Description_C2PC Metadata only | Operational Description | PDF 953.5 KB | |
| ETWMCBSL01_PCB Layout Metadata only | Operational Description | PDF 191.5 KB | |
| UNII Software Security Checklist Metadata only | Operational Description | PDF 219 KB | |
| ETWMCBSL01_Part list Metadata only | Parts List/Tune Up Info | PDF 197.8 KB |
Application Information
| Application ID | 9H4JoaPZttKmNGEfSxBO0A== |
|---|---|
| Final Action Date | 2026-08-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0036977056 |
| Model | ETWMCBSL01 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | RF Module |
| Responsible Party | Yongdeok Kwon, DL-FCC-Admin@lge.com |
| Non-Technical Contact | Heejae Cho, LG Electronics USA, Inc., heejae.cho@lge.com |
| Test Firm | Lee MyoungLim, HCT Co., Ltd., lmlim@hct.co.kr |
| TCB Email | charvey@ieee.org |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9H4JoaPZttKmNGEfSxBO0A== | 2026-08-27 | Class II permissive change or modification of presently authorized equipment |
| c7zM1cqL0FtTNblBB8ff+Q== | 2026-07-27 | Original Equipment |
| SBy6dNgGeOX6UvCq2tFs4w== | 2026-07-27 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SBy6dNgGeOX6UvCq2tFs4w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America, Inc. 840 Yosemite Way Milpitas, CA 95035 |
Date of Grant: 07/27/2026 Application Dated: 07/24/2026 |
| LG Electronics Inc. |
| 222 LG-ro, Jinwi-myeon |
| Pyeongtaek-si, Gyeonggi-do, 17709 South Korea |
| Attention: Yongdeok Kwon , Professional |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BO3LETWMCBSL01 |
| Name of Grantee: | LG Electronics Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.063 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.111 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.109 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.138 |
| Modular Approval. Power listed is the conducted output power. Device is a 2 x 2 MIMO and supports 20, 40, and 80 MHz BW modes. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at 20cm, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application c7zM1cqL0FtTNblBB8ff+Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America, Inc. 840 Yosemite Way Milpitas, CA 95035 |
Date of Grant: 07/27/2026 Application Dated: 07/24/2026 |
| LG Electronics Inc. |
| 222 LG-ro, Jinwi-myeon |
| Pyeongtaek-si, Gyeonggi-do, 17709 South Korea |
| Attention: Yongdeok Kwon , Professional |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BO3LETWMCBSL01 |
| Name of Grantee: | LG Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.578 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.064 |
| Modular Approval. Power listed is the conducted output power. Device is a 2x2 MIMO and supports 20 MHz BW modes. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at 20cm, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 9H4JoaPZttKmNGEfSxBO0A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America, Inc. 840 Yosemite Way Milpitas, CA 95035 |
Date of Grant: 08/27/2026 Application Dated: 08/27/2026 |
| LG Electronics Inc. |
| 222 LG-ro, Jinwi-myeon |
| Pyeongtaek-si, Gyeonggi-do, 17709 South Korea |
| Attention: Yongdeok Kwon , Professional |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BO3LETWMCBSL01 |
| Name of Grantee: | LG Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | RF Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.012 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.578 | ||
| CC | 15C | 2405.0 - 2480.0 | 0.064 |
| C2PC to modify 802.11n(HT20) mode as described in this filing. Modular Approval. Power listed is the conducted output power. Device is a 2x2 MIMO and supports 20 MHz BW modes. This module can only be used when installed in a host device that follows the required instructions for using a trace reference design. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits at 20cm, therefore, this device may be used in mobile configurations. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |