FCC ID 2BOM3-X1
Network set-top box
by Shenzhen Shunruyi Electronics Co., Ltd
Grantee Code: 2BOM3 Product Code: X1
Latest application date: 2025-04-14
FCC ID Device Details
| FCC ID | 2BOM3-X1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2BOM3 |
| Product Code | X1 |
| Applicant Business | Shenzhen Shunruyi Electronics Co., Ltd 🇨🇳 |
| Equipment Class | Network set-top box |
| Test Firm | Shenzhen DL Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2025-04-14 |
| 2412-2462 MHz | Original Equipment | 2025-04-14 |
| 2402-2480 MHz | Original Equipment | 2025-04-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2025-04-14 | PDF 3.4 MB |
| Internal photos | Internal Photos | 2025-04-14 | PDF 4 MB |
| External Photos | External Photos | 2025-04-14 | PDF 2.3 MB |
| Label and label location | ID Label/Location Info | 2025-04-14 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2025-04-14 | PDF 1.3 MB |
| Antenna data sheet | Test Report | 2025-04-14 | PDF 2.4 MB |
| FCC 2.4G WLAN_Test report | Test Report | 2025-04-14 | PDF 5.8 MB |
| FCC 5G WLAN_Test report_1 | Test Report | 2025-04-14 | PDF 5.6 MB |
| FCC 5G WLAN_Test report_2 | Test Report | 2025-04-14 | PDF 4.9 MB |
| FCC BT Test report | Test Report | 2025-04-14 | PDF 5.9 MB |
| 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2025-04-14 | PDF 93.5 KB |
| 2.911 (d)(5)(ii)CertificationApplicantv1.3 | Attestation Statements | 2025-04-14 | PDF 90.9 KB |
| 2.911 (d)(7)USAgentforServiceofProcessv1.3 | Attestation Statements | 2025-04-14 | PDF 120.6 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2025-04-14 | PDF 64.2 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2025-04-14 | PDF 44.3 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2025-04-14 | PDF 91.8 KB |
| Model Difference | Cover Letter(s) | 2025-04-14 | PDF 55.1 KB |
| MPE | RF Exposure Info | 2025-04-14 | PDF 139.5 KB |
| Block Metadata only | Block Diagram | PDF 35.4 KB | |
| SCH Metadata only | Schematics | PDF 255.4 KB | |
| OP Metadata only | Operational Description | PDF 104 KB | |
| FCC Software Security Requirements for UNII devices Rev 2.1 Metadata only | SDR Software/Security Info. | PDF 108.5 KB |
Application Information
| Application ID | OicbUTLG5dPuH9zKxO9bKw== |
|---|---|
| Final Action Date | 2025-04-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0036891216 |
| Model | X1 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Network set-top box |
| Responsible Party | Liu hongfang, 664039502@qq.com  , 13718920193 |
| Technical Contact | Shenzhen Shunruyi Electronics Co., Ltd, 664039502@qq.com |
| Test Firm | Jade Yang, Shenzhen DL Testing Technology Co., Ltd., Jade.yang@dl-cert.com  , 400-688-3552 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| OicbUTLG5dPuH9zKxO9bKw== | 2025-04-14 | Original Equipment |
| Fh0YYomddwvVXZZi80INkA== | 2025-04-14 | Original Equipment |
| 0sxHSrpoeq8Aq3t6K17tQA== | 2025-04-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application OicbUTLG5dPuH9zKxO9bKw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/14/2025 Application Dated: 04/14/2025 |
| Shenzhen Shunruyi Electronics Co., Ltd |
| 401, Building 1, Haoerjia Shitai Technology Park, |
| No. 164 Fengtang Avenue, Zhancheng Community, |
| Fuhai Street, Bao'an District, Shenzhen, China |
| Attention: Liu hongfang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BOM3-X1 |
| Name of Grantee: | Shenzhen Shunruyi Electronics Co., Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Network set-top box |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0268 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0437 |
| Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application Fh0YYomddwvVXZZi80INkA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/14/2025 Application Dated: 04/14/2025 |
| Shenzhen Shunruyi Electronics Co., Ltd |
| 401, Building 1, Haoerjia Shitai Technology Park, |
| No. 164 Fengtang Avenue, Zhancheng Community, |
| Fuhai Street, Bao'an District, Shenzhen, China |
| Attention: Liu hongfang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BOM3-X1 |
| Name of Grantee: | Shenzhen Shunruyi Electronics Co., Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Network set-top box |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0417 |
| Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 0sxHSrpoeq8Aq3t6K17tQA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 04/14/2025 Application Dated: 04/14/2025 |
| Shenzhen Shunruyi Electronics Co., Ltd |
| 401, Building 1, Haoerjia Shitai Technology Park, |
| No. 164 Fengtang Avenue, Zhancheng Community, |
| Fuhai Street, Bao'an District, Shenzhen, China |
| Attention: Liu hongfang , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2BOM3-X1 |
| Name of Grantee: | Shenzhen Shunruyi Electronics Co., Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Network set-top box |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0076 |
| Power listed is the maximum conducted output power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |