FCC ID 2ATZ3-SCMB100
SCMB100 BT temp/humidity sensor gateway
by SmartSense by Digi
Grantee Code: 2ATZ3 Product Code: SCMB100
Latest application date: 2022-02-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2404-2478 MHz | Class II permissive change or modification of presently authorized equipment | 2022-02-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-18 |
| 2402-2480 MHz | Original Equipment | 2020-01-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Rev 1.2.pdf | Users Manual | 2020-01-13 | PDF 388.1 KB |
| External and Internal Photos.pdf | External Photos | 2020-01-13 | PDF 335.9 KB |
| External and Internal Photos.pdf | Internal Photos | 2020-01-13 | PDF 335.9 KB |
| Label and Label Location.pdf | ID Label/Location Info | 2020-01-13 | PDF 337.5 KB |
| Test Setup Photos.pdf | Test Setup Photos | 2020-01-13 | PDF 1.1 MB |
| ES1904-1 FCC 15.247 and RSS-247 BLE Final Report.pdf | Test Report | 2020-01-13 | PDF 1.3 MB |
| ES1904-2 FCC 15.247 and RSS-247 BT5 Final Report.pdf | Test Report | 2020-01-13 | PDF 1.3 MB |
| Class II Permissive Change Letter | Cover Letter(s) | 2022-02-14 | PDF 36.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2022-02-14 | PDF 35.5 KB |
| Agency Agreement_20200910-122010_FCC Agent Authorization Letter - Aug 2020 - Sig | Cover Letter(s) | 2020-09-18 | PDF 30.8 KB |
| Cover Letter_20200910-122010_FCC - Permissive Change Letter - ELS61-US Co-locati | Cover Letter(s) | 2020-09-18 | PDF 25.9 KB |
| Cover Letter - Agent Authorization 1.pdf | Cover Letter(s) | 2020-01-13 | PDF 112.5 KB |
| Cover Letter - Agent Authorization 2.pdf | Cover Letter(s) | 2020-01-13 | PDF 174.5 KB |
| Cover Letter - Delay Between Testing and Filing.pdf | Cover Letter(s) | 2020-01-13 | PDF 260.5 KB |
| Cover Letter - Request for Confidentiality.pdf | Cover Letter(s) | 2020-01-13 | PDF 441.4 KB |
| Cover Letter - Request for Modular Approval.pdf | Cover Letter(s) | 2020-01-13 | PDF 861.2 KB |
| RF Exposure Report | RF Exposure Info | 2022-02-14 | PDF 296.8 KB |
| RF Exposure Info_20200910-122010_SCMB100 - MPE US and Canada with ELS61-US | RF Exposure Info | 2020-09-18 | PDF 97.2 KB |
| RF Exposure Info - Mobile MPE.pdf | RF Exposure Info | 2020-01-13 | PDF 110.7 KB |
| RF Exposure Info - Two collocation situations.pdf | RF Exposure Info | 2020-01-13 | PDF 238.6 KB |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 31.5 KB | |
| Schematic_Rev.pdf Metadata only | Schematics | PDF 48.6 KB | |
| Operation Description.pdf Metadata only | Operational Description | PDF 283.8 KB | |
| BOM_Rev.PDF Metadata only | Parts List/Tune Up Info | PDF 45 KB |
Application Information
| Application ID | Tt6DWcKdYEGhIQs6TT+y0Q== |
|---|---|
| Final Action Date | 2022-02-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0028136455 |
| Model | SCMB100 |
| Frequency Range | 2404-2478 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SCMB100 BT temp/humidity sensor gateway |
| Responsible Party | Steve Habermas, Chief Technology Officer, Steve.Habermas@digi.com  , 8572961844 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | certification@bureauveritas.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to address simultaneous transmission conditions for Maximum Permissible Exposure with FCC ID: SZ9TM-ZP05X and FCC ID: XMR201906EG21G. Final host integration of simultaneous transmission conditions shall be evaluated to address multi-transmitter procedures and KDB 996369 D04. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Tt6DWcKdYEGhIQs6TT+y0Q== | 2022-02-14 | Class II permissive change or modification of presently authorized equipment |
| Tb+99H3RsA7P4UavBIf21w== | 2020-09-18 | Class II permissive change or modification of presently authorized equipment |
| sADV1xEtNAFvdXMiYEn3hA== | 2020-01-13 | Original Equipment |
Grants
TCB Grant - Application Tt6DWcKdYEGhIQs6TT+y0Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/14/2022 Application Dated: 02/11/2022 |
| SmartSense by Digi |
| 186 Lincoln St. |
| Suite 8 |
| Boston, MA 02111 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 BT temp/humidity sensor gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2404.0 - 2478.0 | 0.0586 | |||
| 15C | 2402.0 - 2480.0 | 0.0586 |
| Class II Permissive Change to address simultaneous transmission conditions for Maximum Permissible Exposure with FCC ID: SZ9TM-ZP05X and FCC ID: XMR201906EG21G. Final host integration of simultaneous transmission conditions shall be evaluated to address multi-transmitter procedures and KDB 996369 D04. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application Tt6DWcKdYEGhIQs6TT+y0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SmartSense by Digi 186 Lincoln St. Suite 8 Boston, MA 02111 United States |
Date of Grant: 02/14/2022 Application Dated: 02/11/2022 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 BT temp/humidity sensor gateway |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2404.0 - 2478.0 | 0.0586 | |||
| 15C | 2402.0 - 2480.0 | 0.0586 |
| Class II Permissive Change to address simultaneous transmission conditions for Maximum Permissible Exposure with FCC ID: SZ9TM-ZP05X and FCC ID: XMR201906EG21G. Final host integration of simultaneous transmission conditions shall be evaluated to address multi-transmitter procedures and KDB 996369 D04. Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 09/18/2020 Application Dated: 09/18/2020 |
| SmartSense by Digi |
| 186 Lincoln St. |
| Suite 8 |
| Boston, MA 02111 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2404.0 - 2478.0 | 0.0586 | |||
| 15C | 2402.0 - 2480.0 | 0.0586 |
| Class II Permissive Change Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application Tb+99H3RsA7P4UavBIf21w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SmartSense by Digi 186 Lincoln St. Suite 8 Boston, MA 02111 United States |
Date of Grant: 09/18/2020 Application Dated: 09/18/2020 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2404.0 - 2478.0 | 0.0586 | |||
| 15C | 2402.0 - 2480.0 | 0.0586 |
| Class II Permissive Change Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/13/2020 Application Dated: 01/13/2020 |
| SmartSense by Digi |
| 186 Lincoln St. |
| Suite 8 |
| Boston, MA 02111 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0586 | |||
| 15C | 2404.0 - 2478.0 | 0.0586 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application sADV1xEtNAFvdXMiYEn3hA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SmartSense by Digi 186 Lincoln St. Suite 8 Boston, MA 02111 United States |
Date of Grant: 01/13/2020 Application Dated: 01/13/2020 |
| Attention: Steve Habermas , Chief Technology Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ATZ3-SCMB100 |
| Name of Grantee: | SmartSense by Digi |
| Equipment Class: | Digital Transmission System |
| Notes: | SCMB100 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0586 | |||
| 15C | 2404.0 - 2478.0 | 0.0586 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions. Co-location of this module with other transmitters that operate simultaneously (apart from the collocations as described in this filing) are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process are required. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |