FCC ID 2AX2URW220GL

Cat. 1bis Module

by Rolling Wireless S.a r.l.

Grantee Code: 2AX2U   Product Code: RW220GL
Latest application date: 2026-08-17

FCC ID Device Details

FCC ID2AX2URW220GL
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AX2U
Product CodeRW220GL
Applicant BusinessRolling Wireless S.a r.l. 🇱🇺
Related Domains rollingwireless.com icertifi.com
Equipment ClassCat. 1bis Module
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2026-08-17
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2026-07-29
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2026-01-30
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2025-12-12
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2025-12-04
824.7-848.3 MHzClass II permissive change or modification of presently authorized equipment2025-12-01
824.7-848.3 MHzOriginal Equipment2025-08-14

Exhibits

DocumentTypeAvailableFile
Regulatory Guide_EN_2025_rUsers Manual2026-07-29PDF 2.1 MB
UM_L11079-001Users Manual2026-07-29PDF 1.8 MB
UM_RG_N25728-007Users Manual2026-06-10PDF 2 MB
RegulatoryUsers Manual2026-06-03PDF 2 MB
UMUsers Manual2026-06-03PDF 1.2 MB
Hardware GuideUsers Manual2026-02-10PDF 364.2 KB
intpho_FCC_r3 Metadata onlyInternal Photos2026-07-29PDF 1.2 MB
intpho_FCC_r4Internal Photos2026-07-29PDF 1.2 MB
Intpho_r2Internal Photos2026-06-10PDF 4.6 MB
Photo_Int_r1Internal Photos2026-06-03PDF 3.3 MB
Photo_Int_r1Internal Photos2026-05-31PDF 3.1 MB
Internal PhotosInternal Photos2026-02-10PDF 601.1 KB
Extpho_FCCExternal Photos2026-07-29PDF 2.7 MB
ExtphoExternal Photos2026-06-10PDF 2.7 MB
Photo_Ext_r1External Photos2026-06-03PDF 2.6 MB
Photo_Ext_r1External Photos2026-05-31PDF 2.2 MB
External PhotosExternal Photos2026-02-10PDF 481.9 KB
2AX2URW220GL_E-labelID Label/Location Info2026-08-17PDF 218 KB
E-labelID Label/Location Info2026-07-29PDF 119 KB
5N2409-03_FCC ISED_E-label_HSN-I62C_RW220-GL_AX211NGWID Label/Location Info2026-01-30PDF 143.7 KB
5N2409-03_FCC ISED_E-label_HSN-I62C_RW220-GL_BE211NGWID Label/Location Info2026-01-30PDF 143.7 KB
FCC_E-label_HSN-I67C-4ID Label/Location Info2025-12-12PDF 219.3 KB
E-label_HSN-I65C (RW220-GL)ID Label/Location Info2025-12-04PDF 72.8 KB
E-label_HSN-I65C-4 (RW220-GL)ID Label/Location Info2025-12-01PDF 72.8 KB
LabelID Label/Location Info2025-08-14PDF 73.6 KB
FA5N2409-03A_R01_FCC SAR_HSN-I62C_Appendix D (photoTest Setup Photos2026-07-29PDF 63.7 KB
FA5N2409-03B_R01_FCC SAR_HSN-I62C_Appendix D (photoTest Setup Photos2026-07-29PDF 63.7 KB
FA5O2726-03_R01_FCC SAR_Appendix D (photoTest Setup Photos2026-06-10PDF 27.1 KB
FA591902-03_R01_FCC SAR (photo)Test Setup Photos2026-06-03PDF 157.8 KB
FA591801-03_R01_FCC SAR (photo)Test Setup Photos2026-05-31PDF 52.4 KB
Setup PhotosTest Setup Photos2026-02-10PDF 641.3 KB
Antenna Report HBTest Report2026-07-29PDF 433.2 KB
Antenna Report WNCTest Report2026-07-29PDF 485 KB
LTE band 12Test Report2025-08-14PDF 3.4 MB
LTE band 26(814-824)Test Report2025-08-14PDF 3.1 MB
LTE band 26(824-849)Test Report2025-08-14PDF 4.2 MB
LTE band 5Test Report2025-08-14PDF 3.4 MB
RF Test reportTest Report2025-08-14PDF 3 MB
2AX2URW220GL_Attestation Letter_2.911d5(i)Attestation Statements2026-08-17PDF 106.3 KB
2AX2URW220GL_Attestation Letter_2.911d5(ii)Attestation Statements2026-08-17PDF 106.3 KB
2AX2U_FCC US agent Letter of Authorization_2.911d7Attestation Statements2026-08-17PDF 371.5 KB
Attestation Statement part 2.911(d)(7)Attestation Statements2026-07-29PDF 111 KB
Attstn Stmts parts 2.911(d)(5)(i)&(ii)Attestation Statements2026-07-29PDF 163.1 KB
2AX2URW220GL_Attestation Letter_2.911d5(i)Attestation Statements2026-01-30PDF 149.7 KB
2AX2URW220GL_Attestation Letter_2.911d5(ii)Attestation Statements2026-01-30PDF 149.7 KB
iCertifi FCC US agent Letter of Authorization_2.911d7Attestation Statements2026-01-30PDF 371.5 KB
2AX2URW220GL_Attestation_Covered List_2.911d5(i)Attestation Statements2025-12-12PDF 115.6 KB
2AX2URW220GL_Attestation_Covered List_2.911d5(ii)Attestation Statements2025-12-12PDF 115.6 KB
2AX2URW220GL_Attestation_Covered List_2.911d5Attestation Statements2025-12-04PDF 115.6 KB
iCertifi FCC US agent Letter of AuthorizationAttestation Statements2025-12-04PDF 371.5 KB
Applicant_Declaration_LetterAttestation Statements2025-08-14PDF 154.3 KB
Coverlist AttestationAttestation Statements2025-08-14PDF 150.3 KB
US Agent LetterAttestation Statements2025-08-14PDF 371.5 KB
2AX2URW220GL_cvrltr_Class II Permissive ChangeCover Letter(s)2026-08-17PDF 44 KB
2AX2URW220GL_cvrltr_FCC Confidentiality RequestCover Letter(s)2026-08-17PDF 49.9 KB
2AX2URW220GL_cvrltr_FCC POACover Letter(s)2026-08-17PDF 94.4 KB
Agent Authorization LetterCover Letter(s)2026-07-29PDF 150.7 KB
C2PC LetterCover Letter(s)2026-07-29PDF 128.3 KB
Confidentiality Request LetterCover Letter(s)2026-07-29PDF 198.7 KB
2AX2URW220GL_cvrltr_Class II Permissive ChangeCover Letter(s)2026-01-30PDF 148.8 KB
2AX2URW220GL_cvrltr_FCC Confidentiality RequestCover Letter(s)2026-01-30PDF 143.8 KB
2AX2URW220GL_cvrltr_FCC POACover Letter(s)2026-01-30PDF 124.9 KB
2AX2URW220GL_cvrltr_Class II Permissive ChangeCover Letter(s)2025-12-12PDF 39.9 KB
2AX2URW220GL_cvrltr_FCC Confidentiality RequestCover Letter(s)2025-12-12PDF 104.1 KB
2AX2URW220GL_cvrltr_FCC POACover Letter(s)2025-12-12PDF 101.9 KB
2AX2URW220GL_cvrltr_Class II Permissive Change (HSN-I65C)Cover Letter(s)2025-12-04PDF 39.5 KB
2AX2URW220GL_cvrltr_Class II Permissive Change (HSN-I65C-4)_r1Cover Letter(s)2025-12-01PDF 39.6 KB
Authorization LetterCover Letter(s)2025-08-14PDF 69.3 KB
Confidentiality LetterCover Letter(s)2025-08-14PDF 122.1 KB
Modular Cover letterCover Letter(s)2025-08-14PDF 177.3 KB
FA651401-02_R01_FCC SARRF Exposure Info2026-08-17PDF 1.3 MB
FA651401-02_R01_FCC SAR_Appendix ARF Exposure Info2026-08-17PDF 215.5 KB
FA651401-02_R01_FCC SAR_Appendix BRF Exposure Info2026-08-17PDF 197.8 KB
FA651401-02_R01_FCC SAR_Appendix CRF Exposure Info2026-08-17PDF 2 MB
SAR Appendix B DAERF Exposure Info2026-07-29PDF 2 MB
SAR Appendix C Calibration CertificateRF Exposure Info2026-07-29PDF 1.9 MB
SAR ReportRF Exposure Info2026-07-29PDF 1.7 MB
FA5N2409-03A_R01_FCC SAR_HSN-I62C_Appendix ARF Exposure Info2026-01-30PDF 204.2 KB
FA5N2409-03A_R01_FCC SAR_HSN-I62C_r1RF Exposure Info2026-01-30PDF 1.2 MB
FA5N2409-03B_R01_FCC SAR_HSN-I62C_Appendix ARF Exposure Info2026-01-30PDF 204.2 KB
FA5N2409-03B_R01_FCC SAR_HSN-I62C_Appendix BRF Exposure Info2026-01-30PDF 192.2 KB
FA5N2409-03B_R01_FCC SAR_HSN-I62C_Appendix CRF Exposure Info2026-01-30PDF 2.6 MB
FA5N2409-03B_R01_FCC SAR_HSN-I62C_r1RF Exposure Info2026-01-30PDF 1.2 MB
FA5O2726-03_R01_FCC SARRF Exposure Info2025-12-12PDF 940.7 KB
FA5O2726-03_R01_FCC SAR_Appendix ARF Exposure Info2025-12-12PDF 108.9 KB
FA5O2726-03_R01_FCC SAR_Appendix BRF Exposure Info2025-12-12PDF 109.2 KB
FA5O2726-03_R01_FCC SAR_Appendix CRF Exposure Info2025-12-12PDF 2.1 MB
FA591902-03_R01_FCC SAR_Appendix ARF Exposure Info2025-12-04PDF 328.5 KB
FA591902-03_R01_FCC SAR_Appendix BRF Exposure Info2025-12-04PDF 196.2 KB
FA591902-03_R01_FCC SAR_Appendix CRF Exposure Info2025-12-04PDF 1.6 MB
FA591902-03_R01_FCC SAR_r2RF Exposure Info2025-12-04PDF 1.1 MB
FA591801-03_R01_FCC SARRF Exposure Info2025-12-01PDF 1,007.9 KB
FA591801-03_R01_FCC SAR_Appendix ARF Exposure Info2025-12-01PDF 330.1 KB
FA591801-03_R01_FCC SAR_Appendix BRF Exposure Info2025-12-01PDF 195.5 KB
FA591801-03_R01_FCC SAR_Appendix CRF Exposure Info2025-12-01PDF 1.6 MB
MPE ReportRF Exposure Info2025-08-14PDF 1 MB
Host_User Guide Metadata onlyUsers Manual2027-02-14PDF 1.9 MB
Regulatory Guide_EN Metadata onlyUsers Manual2027-02-14PDF 2.1 MB
UM Regulatory Guide Metadata onlyUsers Manual2027-01-25PDF 2 MB
User Manual Metadata onlyUsers Manual2027-01-25PDF 1.8 MB
2AX2URW220GL_intpho Metadata onlyInternal Photos2027-02-14PDF 2.1 MB
Internal Photos 1 Metadata onlyInternal Photos2027-01-25PDF 5.4 MB
Internal Photos 2 Metadata onlyInternal Photos2027-01-25PDF 5.4 MB
Internal Photos 3 Metadata onlyInternal Photos2027-01-25PDF 3.8 MB
2AX2URW220GL_extpho Metadata onlyExternal Photos2027-02-14PDF 1.2 MB
External Photos - Accessories Metadata onlyExternal Photos2027-01-25PDF 851 KB
FA651401-02_R01_FCC SAR_Appendix D (photo Metadata onlyTest Setup Photos2027-02-14PDF 119.2 KB
Antenna TSUP HB Metadata onlyTest Setup Photos2027-01-25PDF 919.3 KB
Antenna TSUP WNC Metadata onlyTest Setup Photos2027-01-25PDF 717.7 KB
SAR Appendix A Test Setup Photos Metadata onlyTest Setup Photos2027-01-25PDF 529.5 KB
Test Setup Photos Metadata onlyTest Setup Photos2027-01-25PDF 529.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 56 KB
SCH Metadata onlySchematicsPDF 1.2 MB
Cashmere A_ WWAN Antenna Agency Report_Becks_HB Metadata onlyOperational DescriptionPDF 1.1 MB
Cashmere A_ WWAN Antenna Agency Report_Becks_WNC Metadata onlyOperational DescriptionPDF 2 MB
OpDes_Sensor Metadata onlyOperational DescriptionPDF 570.5 KB
OpeDes_Antenna_HB_NB Metadata onlyOperational DescriptionPDF 907.4 KB
OpeDes_Antenna_HB_TB Metadata onlyOperational DescriptionPDF 891.5 KB
OpeDes_Antenna_HB_r1 Metadata onlyOperational DescriptionPDF 1.2 MB
OpeDes_Antenna_WNC_NB Metadata onlyOperational DescriptionPDF 1.2 MB
OpeDes_Antenna_WNC_TB Metadata onlyOperational DescriptionPDF 1.2 MB
OpeDes_Antenna_WNC_r1 Metadata onlyOperational DescriptionPDF 2 MB
OpeDes_power reduction Metadata onlyOperational DescriptionPDF 455.8 KB
OpeDes_r1 Metadata onlyOperational DescriptionPDF 1.1 MB
OpeDes_r1 Metadata onlyOperational DescriptionPDF 157.6 KB
Operation Description Metadata onlyOperational DescriptionPDF 267.1 KB
Operation description Metadata onlyOperational DescriptionPDF 1.2 MB
WWAN Antenna Agency Report Beck_HB Metadata onlyOperational DescriptionPDF 1.3 MB
WWAN Antenna Agency Report Becks_v2_NB_HB Metadata onlyOperational DescriptionPDF 1.9 MB
WWAN Antenna Agency Report Becks_v2_NB_WNC Metadata onlyOperational DescriptionPDF 1.5 MB
WWAN Antenna Agency Report Becks_v2_TB_HB Metadata onlyOperational DescriptionPDF 1.8 MB
WWAN Antenna Agency Report Becks_v2_TB_WNC Metadata onlyOperational DescriptionPDF 1.7 MB
5N2409-03 FCC & ISED Tune-up Metadata onlyParts List/Tune Up InfoPDF 74.4 KB
5O2726-03 FCC tune up Metadata onlyParts List/Tune Up InfoPDF 78.4 KB
651401-02_RW220-GL_tune up Metadata onlyParts List/Tune Up InfoPDF 129.3 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 116.3 KB
TunPro Metadata onlyParts List/Tune Up InfoPDF 75.1 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 82.6 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 89.1 KB
TunePro Metadata onlyParts List/Tune Up InfoPDF 79.1 KB

Application Information

Application IDLrTVmy4zadh340q+fuU24g==
Final Action Date2026-08-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0030146674
ModelRW220GL
Frequency Range824.7-848.3 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCat. 1bis Module
Responsible PartyGene Santana, gene.santana@rollingwireless.com , +1-561-9098960
Non-Technical ContactPaul Preston, Americas Compliance consulting, LLC dba iCertifi, fccagent@icertifi.com , 866-885-4575
Test FirmAlex Chen, SPORTON International Inc., alex@sporton.com.tw , +886-3-327-3456
TCB EmailQA65@sporton-usa.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
LrTVmy4zadh340q+fuU24g==2026-08-17Class II permissive change or modification of presently authorized equipment
J2xZfA93v/kWqPDModn8JA==2026-07-29Class II permissive change or modification of presently authorized equipment
U09abTaGgKtu2knA4YCqzA==2026-01-30Class II permissive change or modification of presently authorized equipment
x7TSTNgbR6OTINm2pY/+SQ==2025-12-12Class II permissive change or modification of presently authorized equipment
F1UdW6b7Y/uebdD0+gYsTw==2025-12-04Class II permissive change or modification of presently authorized equipment
mMvrHwe2hSZDCE7r9y9OVA==2025-12-01Class II permissive change or modification of presently authorized equipment
BVknY771qcM0zlMntVGUcA==2025-08-14Original Equipment

Equipment Authorization

FrequencyOutputTolerance
699.7-715.3 MHz0.30130.1ppm
699.7-715.3 MHz0.2630.1ppm
699.7-715.3 MHz0.3020.1ppm
814.7-823.3 MHz0.3020.1ppm
814.7-823.3 MHz0.27040.1ppm
814.7-823.3 MHz0.27420.1ppm
824.7-848.3 MHz0.29720.1ppm
824.7-848.3 MHz0.26180.1ppm
824.7-848.3 MHz0.2460.1ppm
824.7-848.3 MHz0.29110.1ppm

Grants

TCB Grant - Application x7TSTNgbR6OTINm2pY/+SQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/12/2025

Application Dated: 12/10/2025
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat. 1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).

Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer HSN-I67C-4. The highest reported SAR value for body transmission use condition is 0.34 W/kg.


TCB Grant - Application U09abTaGgKtu2knA4YCqzA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 01/30/2026

Application Dated: 01/28/2026
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat. 1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).

Class II Permissive Change: Enables portable use when integrated into the HP Notebook Computer HSN-I62C. The highest reported SAR for the body and simultaneous transmission use conditions are 1.20 W/kg and 1.58 W/kg, respectively.


TCB Grant - Application mMvrHwe2hSZDCE7r9y9OVA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/01/2025

Application Dated: 11/27/2025
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat.1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).

Class II Permissive Change: enable integration into HP Notebook Computer Model: HSN-I65C-4. The highest reported Body SAR value is 0.34 W/kg.


TCB Grant - Application LrTVmy4zadh340q+fuU24g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/17/2026

Application Dated: 08/10/2026
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat. 1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).

Class II Permissive Change: Enables portable use when integrated into the HP Tablet HSN-I69C. The highest reported SAR for the body and simultaneous transmission use conditions are 1.10 W/kg and 1.10 W/kg, respectively.


TCB Grant - Application J2xZfA93v/kWqPDModn8JA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 07/29/2026

Application Dated: 07/27/2026
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat.1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations, the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26 (824-849); LTE of 1.4, 3, 5,10 and 15 MHz bandwidth modes for LTE Band 26 (824-849).

Class II Permissive Change: Authorizes portable use when integrated into the HP Notebook Computer HSN-I70C. The highest reported SAR for is 0.65 W/kg.


TCB Grant - Application F1UdW6b7Y/uebdD0+gYsTw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Sporton International (USA) Inc.
1175 Montague Expressway
Milpitas, CA 95035
Date of Grant: 12/04/2025

Application Dated: 12/01/2025
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat.1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).

Class II Permissive Change: enable integration into HP Notebook Computer Model HSN-I65C. The highest reported SAR for body and simultaneous transmission exposure conditions are 0.92 W/kg and 1.50 W/kg, respectively.


TCB Grant - Application BVknY771qcM0zlMntVGUcA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/14/2025

Application Dated: 08/13/2025
Rolling Wireless S.a r.l.
8-10 rue Mathias Hardt 1717 Luxembourg
Luxembourg, 1717
Luxembourg
 
Attention: Gene Santana , VP

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URW220GL
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Cat.1bis Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.3 0.2904 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.246 0.1  PM 5M09W7D
22H 824.7  -  848.3 0.2911 0.1  PM 2M72G7D
27 699.7  -  715.3 0.3013 0.1  PM 9M05G7D
27 699.7  -  715.3 0.263 0.1  PM 5M08W7D
27 699.7  -  715.3 0.302 0.1  PM 1M12G7D
90 814.7  -  823.3 0.302 0.1  PM 9M05G7D
90 814.7  -  823.3 0.2704 0.1  PM 5M08W7D
90 814.7  -  823.3 0.2742 0.1  PM 2M72W7D
22H 824.7  -  848.3 0.2972 0.1  PM 13M6G7D
22H 824.7  -  848.3 0.2618 0.1  PM 5M26W7D

Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed the values listed in the filling for satisfying RF exposure compliance according to as defined in 2.1091. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

This device supports LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for LTE Band 5, 12, 26(824-849); LTE of 1.4, 3, 5,10 and 15MHz bandwidth modes for LTE Band 26(824-849).