FCC ID A269ZUA171

Head Unit

by ALPS ALPINE CO., LTD.

Grantee Code: A26   Product Code: 9ZUA171
Latest application date: 2024-07-18

FCC ID Device Details

FCC IDA269ZUA171
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA26
Product Code9ZUA171
Applicant BusinessALPS ALPINE CO., LTD. 🇯🇵
Related Domains alpsalpine.com
Equipment ClassHead Unit
Test FirmUL Japan, Inc. SHONAN EMC LABORATORY

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5320 MHzOriginal Equipment2024-07-18
2402-2480 MHzOriginal Equipment2024-07-18
2402-2480 MHzOriginal Equipment2024-07-18

Exhibits

DocumentTypeAvailableFile
05 User ManualUsers Manual2024-07-18PDF 244.7 KB
04 Internal PhotoInternal Photos2024-07-18PDF 730.8 KB
04 External PhotoExternal Photos2024-07-18PDF 116.6 KB
06 Label and LocationID Label/Location Info2024-07-18PDF 145.4 KB
03 FCC DFS Setup PhotoTest Setup Photos2024-07-18PDF 676.9 KB
03 FCC Test Setup Photo_DSS_ATTest Setup Photos2024-07-18PDF 146 KB
03 FCC Test Setup Photo_DSS_RETest Setup Photos2024-07-18PDF 344.3 KB
03 FCC Test Setup Photo_DTS_ATTest Setup Photos2024-07-18PDF 151.5 KB
03 FCC Test Setup Photo_DTS_RETest Setup Photos2024-07-18PDF 344.2 KB
03 FCC Test Setup Photo_NII_ATTest Setup Photos2024-07-18PDF 140.9 KB
03 FCC Test Setup Photo_NII_RETest Setup Photos2024-07-18PDF 456.8 KB
03 Antenna SpecificationTest Report2024-07-18PDF 956.1 KB
03 FCC DFS ReportTest Report2024-07-18PDF 796.8 KB
03 FCC Test Report_DSS_ATTest Report2024-07-18PDF 2.6 MB
03 FCC Test Report_DSS_RETest Report2024-07-18PDF 2.7 MB
03 FCC Test Report_DTS_ATTest Report2024-07-18PDF 2.4 MB
03 FCC Test Report_DTS_RE-1Test Report2024-07-18PDF 4.9 MB
03 FCC Test Report_DTS_RE-2Test Report2024-07-18PDF 1.2 MB
03 FCC Test Report_NII_AT-1Test Report2024-07-18PDF 5 MB
03 FCC Test Report_NII_AT-2Test Report2024-07-18PDF 5.5 MB
03 FCC Test Report_NII_AT-3Test Report2024-07-18PDF 5.4 MB
03 FCC Test Report_NII_RE-1Test Report2024-07-18PDF 4.9 MB
03 FCC Test Report_NII_RE-2Test Report2024-07-18PDF 5 MB
03 FCC Test Report_NII_RE-3Test Report2024-07-18PDF 4.9 MB
03 FCC Test Report_NII_RE-4Test Report2024-07-18PDF 5 MB
03 FCC Test Report_NII_RE-5Test Report2024-07-18PDF 452.3 KB
01 FCC 2.911(d)(5) AttestationAttestation Statements2024-07-18PDF 111.6 KB
01 FCC Agent Attestation_AgentAttestation Statements2024-07-18PDF 1.1 MB
01 FCC Agent Attestation_ApplicantAttestation Statements2024-07-18PDF 115.5 KB
02 FCC Authorization LetterCover Letter(s)2024-07-18PDF 141 KB
02 FCC Request for Confidentiality LetterCover Letter(s)2024-07-18PDF 138.7 KB
03 FCC RF ExposureRF Exposure Info2024-07-18PDF 24.3 KB
07 Confidential_Block Diagram Metadata onlyBlock DiagramPDF 643.9 KB
09 Confidential_Schematics Metadata onlySchematicsPDF 113.1 KB
08 Confidential_Operational Description-Software Security Metadata onlyOperational DescriptionPDF 73.6 KB
08 Confidential_Operational Description-Specification Metadata onlyOperational DescriptionPDF 309.4 KB
10 Confidential_Parts List Metadata onlyParts List/Tune Up InfoPDF 78.1 KB

Application Information

Application IDjZ9UtVfUwXsrQDOcTzw5Lw==
Final Action Date2024-07-18
Application PurposeOriginal Equipment
Applicant FRN0016755563
Model9ZUA171
Frequency Range5180-5320 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionHead Unit
Responsible PartyKenji Nagase, ALJP_SMB_00436@alpsalpine.com , +81-246-36-4111
AgentAkiyo Akiyo Akiyo, UL Japan, Inc., Akiyo.Hayashi@ul.com , 81-596-24-8999
Technical ContactKazuya Noda, UL Japan, Inc., Kazuya.Noda@ul.com , 81-463-50-6400
Test FirmAkio Hayashi, UL Japan, Inc. SHONAN EMC LABORATORY, Akio.Hayashi@ul.com , 81-463-50-6400
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands.

Applications

Application IDDatePurpose
jZ9UtVfUwXsrQDOcTzw5Lw==2024-07-18Original Equipment
a63msa5G4jUnnKMXfBTWZQ==2024-07-18Original Equipment
QpR/3XO5B/IvxkjuYH30qg==2024-07-18Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004200015CCC
2402-2480 MHz0.002815CCC
2412-2462 MHz0.084715CCC
5180-5320 MHz0.011915ECC, MO
5500-5720 MHz0.009215ECC, MO
5745-5825 MHz0.010115ECC, MO

Grants

TCB Grant - Application QpR/3XO5B/IvxkjuYH30qg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/18/2024

Application Dated: 07/18/2024
ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Digital Transmission System
Notes: Head Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0847  
CC 15C 2402.0  -  2480.0 0.0028  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QpR/3XO5B/IvxkjuYH30qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
  Date of Grant: 07/18/2024

Application Dated: 07/18/2024
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Digital Transmission System
Notes: Head Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0847  
CC 15C 2402.0  -  2480.0 0.0028  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 1 MHz and 2 MHz bandwidth modes for Bluetooth Low energy.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jZ9UtVfUwXsrQDOcTzw5Lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/18/2024

Application Dated: 07/18/2024
ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Head Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0119  
CC MO 15E 5500.0  -  5720.0 0.0092  
CC MO 15E 5745.0  -  5825.0 0.0101  

Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jZ9UtVfUwXsrQDOcTzw5Lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
  Date of Grant: 07/18/2024

Application Dated: 07/18/2024
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Head Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0119  
CC MO 15E 5500.0  -  5720.0 0.0092  
CC MO 15E 5745.0  -  5825.0 0.0101  

Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application a63msa5G4jUnnKMXfBTWZQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/18/2024

Application Dated: 07/18/2024
ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Head Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0042  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application a63msa5G4jUnnKMXfBTWZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ALPS ALPINE CO., LTD.
20-1,Yoshima Industrial Park
Iwaki,Fukushima,, 970-1192
Japan
  Date of Grant: 07/18/2024

Application Dated: 07/18/2024
 
Attention: Kenji Nagase

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A269ZUA171
Name of Grantee:  ALPS ALPINE CO., LTD.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Head Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0042  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: