FCC ID A3LAX210D
WiFi 6E AX210 Module
by Samsung Electronics Co Ltd
Grantee Code: A3L Product Code: AX210D
Latest application date: 2021-09-16
FCC ID Device Details
| FCC ID | A3LAX210D |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A3L |
| Product Code | AX210D |
| Applicant Business | Samsung Electronics Co Ltd 🇺🇸 |
| Related Domains |  samsung.com |
| Equipment Class | WiFi 6E AX210 Module |
| Test Firm | Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-16 |
| 5955-7115 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-16 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2021-09-16 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2021-08-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2021-08-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 | 2021-08-24 |
| 5955-7115 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 02/18/2021 | 2021-08-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_Host Manual | Users Manual | 2022-03-15 | PDF 3.6 MB |
| TempConfidential_Host Manual | Test Setup Photos | 2022-03-15 | PDF 3.6 MB |
| Label Information_Module Manual_Rev 02 | Users Manual | 2022-02-20 | PDF 387.4 KB |
| TempConfidential_Internal photo_NP935QDC_Rev 04 | Internal Photos | 2022-03-15 | PDF 1.9 MB |
| TempConfidential_External photo_NP935QDC | External Photos | 2022-03-15 | PDF 596 KB |
| TempConfidential_External Photograph | External Photos | 2022-02-20 | PDF 54.8 KB |
| TempConfidential_Host label_NP935QDC | ID Label/Location Info | 2021-09-16 | PDF 918 KB |
| Attestation Letter for Label Location | ID Label/Location Info | 2021-08-24 | PDF 212.3 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Photographs of EUT Setup and Antenn | Test Setup Photos | 2022-03-15 | PDF 1.8 MB |
| TempConfidential_Test Set-up photo_i5_JBC,JBP | Test Setup Photos | 2022-03-15 | PDF 725.9 KB |
| TempConfidential_Test Set-up photo_i7_JBC,JBP | Test Setup Photos | 2022-03-15 | PDF 730.1 KB |
| FCCBVCO-WAY-P21080101-1R1_NP935QDC_RF 5 GHz UNII Test Report_Part 1 | Test Report | 2021-09-16 | PDF 4.9 MB |
| FCCBVCO-WAY-P21080101-1R1_NP935QDC_RF 5 GHz UNII Test Report_Part 2 | Test Report | 2021-09-16 | PDF 3.5 MB |
| FCCBVCO-WAY-P21080101-1_NP935QDC_RF 5 GHz U-NII Test Report_Part 1 | Test Report | 2021-09-16 | PDF 4.9 MB |
| FCCBVCO-WAY-P21080101-1_NP935QDC_RF 5 GHz U-NII Test Report_Part 2 | Test Report | 2021-09-16 | PDF 3.8 MB |
| FCCBVCO-WAY-P21080101R1_NP935QDC_RF 2.4 GHz DTS Test Report | Test Report | 2021-09-16 | PDF 1.6 MB |
| Final_FCCBVCO-WAY-P21070008-1R2_NP935QDC_FCC Part 15B_i5_JBC,JBP | Test Report | 2021-09-16 | PDF 1.9 MB |
| Final_FCCBVCO-WAY-P21070008-2R2_NP935QDC_FCC Part 15B_i7_JBC,JBP | Test Report | 2021-09-16 | PDF 1.9 MB |
| C2PC Request Letter_Rev 04 | Cover Letter(s) | 2021-09-16 | PDF 154.6 KB |
| FCC Agent Authorization Letter_NP935QDC | Cover Letter(s) | 2021-09-16 | PDF 133.2 KB |
| Request for confidentiality Letter_NP935QDC | Cover Letter(s) | 2021-09-16 | PDF 148 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2021-08-24 | PDF 98.7 KB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2021-08-24 | PDF 138.3 KB |
| FCC Authorization Letter-Change in ID | Cover Letter(s) | 2021-08-24 | PDF 89.1 KB |
| Request for Change in ID-Letter_Rev 02 | Cover Letter(s) | 2021-08-24 | PDF 179.8 KB |
| Request for confidentiality letter | Cover Letter(s) | 2021-08-24 | PDF 112.1 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex A | RF Exposure Info | 2021-09-16 | PDF 4.6 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex A. Plots of System Verificati Metadata only | RF Exposure Info | 2021-09-16 | PDF 4.6 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex B | RF Exposure Info | 2021-09-16 | PDF 3 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex B. Plots of SAR and Power Den Metadata only | RF Exposure Info | 2021-09-16 | PDF 3 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex C | RF Exposure Info | 2021-09-16 | PDF 792.4 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex C. Tissue and System Verifica Metadata only | RF Exposure Info | 2021-09-16 | PDF 792.4 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex D | RF Exposure Info | 2021-09-16 | PDF 859.9 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex D. Maximum Target Conducted P Metadata only | RF Exposure Info | 2021-09-16 | PDF 859.9 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex E | RF Exposure Info | 2021-09-16 | PDF 1.3 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex E. Measured Conducted Power R Metadata only | RF Exposure Info | 2021-09-16 | PDF 1.3 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex F | RF Exposure Info | 2021-09-16 | PDF 989.6 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex F. SAR Test Result Metadata only | RF Exposure Info | 2021-09-16 | PDF 989.6 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex G | RF Exposure Info | 2021-09-16 | PDF 751.2 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex G. SAR Measurement Variabilit Metadata only | RF Exposure Info | 2021-09-16 | PDF 751.2 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex H | RF Exposure Info | 2021-09-16 | PDF 809.9 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex H. Analysis of Simultaneous T Metadata only | RF Exposure Info | 2021-09-16 | PDF 809.9 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex I | RF Exposure Info | 2021-09-16 | PDF 1.1 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex I. SAR to Peak Location Separ Metadata only | RF Exposure Info | 2021-09-16 | PDF 1.1 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex J | RF Exposure Info | 2021-09-16 | PDF 760.1 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex J. Calibration of Test Equipm Metadata only | RF Exposure Info | 2021-09-16 | PDF 760.1 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex K | RF Exposure Info | 2021-09-16 | PDF 832.7 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex K. Considerations Related to Metadata only | RF Exposure Info | 2021-09-16 | PDF 832.7 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex L | RF Exposure Info | 2021-09-16 | PDF 912.4 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex L.. Verifying the mechanism o Metadata only | RF Exposure Info | 2021-09-16 | PDF 912.4 KB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-1 | RF Exposure Info | 2021-09-16 | PDF 4.2 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-2 | RF Exposure Info | 2021-09-16 | PDF 3.9 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-3 | RF Exposure Info | 2021-09-16 | PDF 4 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-4 | RF Exposure Info | 2021-09-16 | PDF 4.9 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-5 | RF Exposure Info | 2021-09-16 | PDF 4.5 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-6 | RF Exposure Info | 2021-09-16 | PDF 4.1 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z-7 | RF Exposure Info | 2021-09-16 | PDF 4.7 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_FCC_Annex Z. Calibration Certificate fo Metadata only | RF Exposure Info | 2021-09-16 | PDF 4.2 MB |
| SFACHI-WTW-P21070078 R1_Samsung_NP935QDC_US-FCC SAR and PD Report | RF Exposure Info | 2021-09-16 | PDF 2.3 MB |
| Confidential_Operational Description_NP935QDC Metadata only | Operational Description | PDF 1.9 MB | |
| Software Security Letter Metadata only | SDR Software/Security Inf | PDF 297.8 KB |
Application Information
| Application ID | qfoMBXGz3CXD8WPoSEIGig== |
|---|---|
| Final Action Date | 2021-09-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027908797 |
| Model | AX210D |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WiFi 6E AX210 Module |
| Responsible Party | Jenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375 |
| Technical Contact | Jongha Choi, BV CPS ADT Korea Ltd., Jongha.choi@bureauveritas.com  , +82-70-4338-5212 |
| Test Firm | Eric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@tw.bureauveritas.com  , +886-3-2641570 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/15/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reportedBody and Simultaneous SAR values are 0.29 W/kg and 1.52 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qfoMBXGz3CXD8WPoSEIGig== | 2021-09-16 | Class II permissive change or modification of presently authorized equipment |
| pLJZplcDBSZgtfn5Iz41KA== | 2021-09-16 | Class II permissive change or modification of presently authorized equipment |
| k0AGSxtfV21BFKymkIKxMw== | 2021-09-16 | Class II permissive change or modification of presently authorized equipment |
| Re3yJpB0XSvTZ/E7dqxvnw== | 2021-09-16 | Class II permissive change or modification of presently authorized equipment |
| FctqVPB+XXABVJExpjcO+w== | 2021-09-16 | Class II permissive change or modification of presently authorized equipment |
| nrszpRM6rEKnwIQlhxYvdQ== | 2021-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| bLLJKm7d1e+qwqO4Tu+8xA== | 2021-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| K6tSCObsLWPvYvlNQfXWcQ== | 2021-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| 9b5/QRrvL1KDC4rBvRAxbw== | 2021-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 12/02/2020 |
| 4c5tH1iXkOBrLjr+GM80Tw== | 2021-08-24 | Change in identification of presently authorized equipment. Original FCC ID: PD9AX210D2 Grant Date: 02/18/2021 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0130000 | 15C | CC |
| 2402-2480 MHz | 0.009 | 15C | CC |
| 2412-2472 MHz | 0.787 | 15C | CC, MO |
| 2422-2462 MHz | 0.601 | 15C | CC, MO |
| 5190-5230 MHz | 0.219 | 15E | CC, MO |
| 5210 MHz | 0.076 | 15E | CC, MO |
| 5250 MHz | 0.063 | 15E | CC, MO |
| 5260-5320 MHz | 0.162 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.151 | 15E | CC, MO, ND |
| 5290 MHz | 0.072 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.243 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.217 | 15E | CC, MO, ND |
| 5710 MHz | 0.181 | 15E | CC, MO, ND |
| 5720 MHz | 0.123 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.248 | 15E | CC, MO |
| 5755-5795 MHz | 0.257 | 15E | CC, MO |
| 5775 MHz | 0.176 | 15E | CC, MO |
| 5955-7115 MHz | 0.003 | 15E | CC, MO |
| 5965-7085 MHz | 0.007 | 15E | CC, MO |
| 5985-7025 MHz | 0.013 | 15E | CC, MO |
| 6025-6985 MHz | 0.025 | 15E | CC, MO |
Grants
TCB Grant - Application Re3yJpB0XSvTZ/E7dqxvnw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.17 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Re3yJpB0XSvTZ/E7dqxvnw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.17 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reportedBody and Simultaneous SAR values are 0.29 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qfoMBXGz3CXD8WPoSEIGig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reportedBody and Simultaneous SAR values are 0.29 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Class II Permissive Change to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. |
EAS Grant - Application pLJZplcDBSZgtfn5Iz41KA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Class II Permissive Change to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application nrszpRM6rEKnwIQlhxYvdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application K6tSCObsLWPvYvlNQfXWcQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.787 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.601 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.37 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna,Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHzBW modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. Power Density and SAR testing were performed to demonstrate RF exposure compliance. demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.07 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application k0AGSxtfV21BFKymkIKxMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHzBW modes. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. Power Density and SAR testing were performed to demonstrate RF exposure compliance. demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.07 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.19 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application FctqVPB+XXABVJExpjcO+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/16/2021 Application Dated: 09/01/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Class II Permissive Change with a decrease in the WLAN Output Power and to request approval for portable category specific host Notebook PC, model number Samsung NP935QDC with antenna specified in this filing and contains additional certified 5G NR module. SAR testing was performed to demonstrate RF compliance. The highest reported reported Body and Simultaneous SAR values are 1.19 W/kg and 1.52 W/kg. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application bLLJKm7d1e+qwqO4Tu+8xA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.159 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.219 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.076 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.063 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.162 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.151 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.072 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.243 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.181 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.123 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.217 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.248 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.257 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.176 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SARvalues are 0.78 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body andSimultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9b5/QRrvL1KDC4rBvRAxbw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.013 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body andSimultaneous SAR values are 0.03 W/kg and 1.55 W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross referenceAntenna, Type PIFA at 17mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 0.64 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 17mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing.Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHzBW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 4c5tH1iXkOBrLjr+GM80Tw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/24/2021 Application Dated: 08/17/2021 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LAX210D |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | WiFi 6E AX210 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5955.0 - 7115.0 | 0.003 | ||
| CC MO | 15E | 5965.0 - 7085.0 | 0.007 | ||
| CC MO | 15E | 5985.0 - 7025.0 | 0.013 | ||
| CC MO | 15E | 6025.0 - 6985.0 | 0.025 |
| Power Output listed is RF Conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Power Density and SAR testing was performed to demonstrate RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.32W/kg and 0.64 W/kg respectively. This module is approved in portable/mobile configurations with antenna Intel Antenna, TypePIFA at 17mm minimum test separation distance. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing.Device operation is intended for indoor use only. This device supports 20, 40, 80 and 160 MHzBW modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |