FCC ID A3LEPP3105
WIRELESS CHARGER
by Samsung Electronics Co Ltd
Grantee Code: A3L Product Code: EPP3105
Latest application date: 2019-09-08
FCC ID Device Details
| FCC ID | A3LEPP3105 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A3L |
| Product Code | EPP3105 |
| Applicant Business | Samsung Electronics Co Ltd 🇺🇸 |
| Related Domains | |
| Equipment Class | WIRELESS CHARGER |
| Test Firm | SGS Korea Co., Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 0.121 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-08 |
| 0.121 MHz | Original Equipment | 2019-08-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2020-02-16 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2020-03-07 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2020-02-16 | PDF 1.5 MB |
| External Photos | External Photos | 2020-03-07 | PDF 265.3 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-08-19 | PDF 180.4 KB |
| Test Setup Photo | Test Setup Photos | 2020-03-07 | PDF 789.6 KB |
| Test Setup Photo | Test Setup Photos | 2020-02-16 | PDF 1.3 MB |
| Test Report_FCC_MPE | RF Exposure Info | 2019-09-08 | PDF 1.2 MB |
| Test Report_FCC_WPT | Test Report | 2019-09-08 | PDF 2 MB |
| FCC_TESTREPORT_WPT | Test Report | 2019-08-19 | PDF 2.3 MB |
| FCC_Test Report_MPE | RF Exposure Info | 2019-08-19 | PDF 1.2 MB |
| FCC Agent Authorization Letter | Cover Letter(s) | 2019-09-08 | PDF 634.3 KB |
| FCC Class 2 Permissive Change Letter | Cover Letter(s) | 2019-09-08 | PDF 120.8 KB |
| FCC Confidentiality Request Letter | Cover Letter(s) | 2019-09-08 | PDF 541 KB |
| FCC Cover Letter | Cover Letter(s) | 2019-09-08 | PDF 113.1 KB |
| Agent Authorization Letter | Cover Letter(s) | 2019-08-19 | PDF 594.3 KB |
| FCC Cover Letter | Cover Letter(s) | 2019-08-19 | PDF 195.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 96.4 KB | |
| Schematics Metadata only | Schematics | PDF 2.4 MB | |
| Schematics_EP-P3105_REV 0.1 Metadata only | Schematics | PDF 247.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 67.7 KB |
Application Information
| Application ID | v+cCr8gR+ERsQudl4wdAUQ== |
|---|---|
| Final Action Date | 2019-09-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027908797 |
| Model | EPP3105 |
| Frequency Range | 0.121 MHz |
| Equipment Class | DCD - Part 15 Low Power Transmitter Below 1705 kHz |
| Device Description | WIRELESS CHARGER |
| Responsible Party | Jenni Chun, General Manager, j1.chun@samsung.com |
| Technical Contact | Hyunchae You, SGS Korea Co., Ltd, hyunchae.you@sgs.com |
| Non-Technical Contact | YoungA Kum, SGS Korea Co., Ltd, younga.kum@sgs.com |
| Test Firm | Park Heejin, SGS Korea Co., Ltd, heejin.park@sgs.com |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/07/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| v+cCr8gR+ERsQudl4wdAUQ== | 2019-09-08 | Class II permissive change or modification of presently authorized equipment |
| BEQrRispGvHjEqnyKBPRRw== | 2019-08-19 | Original Equipment |
Grants
TCB Grant - Application v+cCr8gR+ERsQudl4wdAUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 09/08/2019 Application Dated: 09/08/2019 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LEPP3105 |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | WIRELESS CHARGER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 0.1267 - 0.1287 | ||||
| 15C | 0.1205 - 0.1205 | ||||
| 15C | 0.146 - 0.146 |
| The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules. |
EAS Grant - Application v+cCr8gR+ERsQudl4wdAUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 09/08/2019 Application Dated: 09/08/2019 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LEPP3105 |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | WIRELESS CHARGER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 0.1267 - 0.1287 | ||||
| 15C | 0.1205 - 0.1205 | ||||
| 15C | 0.146 - 0.146 |
| The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. Permissive change as specified under 47 CFR 2.1043 of the FCC rules. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 08/19/2019 Application Dated: 08/19/2019 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LEPP3105 |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | WIRELESS CHARGER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 0.1267 - 0.1287 | ||||
| 15C | 0.1205 - 0.1205 | ||||
| 15C | 0.146 - 0.146 |
| The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application BEQrRispGvHjEqnyKBPRRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 08/19/2019 Application Dated: 08/19/2019 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LEPP3105 |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Low Power Transmitter Below 1705 kHz |
| Notes: | WIRELESS CHARGER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 0.1267 - 0.1287 | ||||
| 15C | 0.1205 - 0.1205 | ||||
| 15C | 0.146 - 0.146 |
| The antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitting operating conditions for satisfying RF exposure compliance. |
| Mail To: |