Output power is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.26 W/kg, 0.30 W/kg,TCB Grant - Application SSXKA5nAn8M6JHQyxN7KGg==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SSXKA5nAn8M6JHQyxN7KGg==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application hF1SDMBP5dc8ZVx0ys04Ug==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
0.174
|
2.5
PM
|
245KGXW
|
|
24E |
1850.2
-
1909.8
|
0.746
|
2.5
PM
|
246KGXW
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.42 W/kg, 0.44 W/kg, 0.55 W/kg, and 0.62 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application hF1SDMBP5dc8ZVx0ys04Ug==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
0.174
|
2.5
PM
|
245KGXW
|
|
24E |
1850.2
-
1909.8
|
0.746
|
2.5
PM
|
246KGXW
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.42 W/kg, 0.44 W/kg, 0.55 W/kg, and 0.62 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application BDpw0bGQ31nkYKowf345aA==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.0102
|
|
|
| Output power is conducted. This device is approved for use in the handset described in the filing. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BDpw0bGQ31nkYKowf345aA==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.0102
|
|
|
| Output power is conducted. This device is approved for use in the handset described in the filing. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application amplJHt0Lp7z3kg/YWf4XQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Unlicensed National Information Infrastructure TX |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15E |
5180.0
-
5240.0
|
0.041
|
2.5
PM
|
|
| CC |
15E |
5260.0
-
5320.0
|
0.033
|
2.5
PM
|
|
| CC |
15E |
5500.0
-
5700.0
|
0.03
|
2.5
PM
|
|
| Power output is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission use conditions are <0.10 W/kg, 0.14 W/kg, and 0.62 W/kg respectively.
This device is restricted to indoor-only use for the 5150.0 - 5250.0 MHz band. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 06-96 as a Client only without Radar Detection. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application amplJHt0Lp7z3kg/YWf4XQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 05/04/2012
Application Dated: 05/04/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LGTS7500W |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Unlicensed National Information Infrastructure TX |
| Notes: |
Cellular/PCS GSM Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15E |
5180.0
-
5240.0
|
0.041
|
2.5
PM
|
|
| CC |
15E |
5260.0
-
5320.0
|
0.033
|
2.5
PM
|
|
| CC |
15E |
5500.0
-
5700.0
|
0.03
|
2.5
PM
|
|
| Power output is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn accessory operation is based on a separation distance of 1.0 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR values for head, body-worn accessory, and simultaneous transmission use conditions are | |