FCC ID A3LGTY3300

Cellular/ PCS WCDMA/ GSM/ EDGE Module

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: GTY3300
Latest application date: 2011-03-03

FCC ID Device Details

FCC IDA3LGTY3300
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeGTY3300
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com ccsemc.com
Equipment ClassCellular/ PCS WCDMA/ GSM/ EDGE Module
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2011-03-03
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2010-06-22
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2010-05-04
824.2-848.8 MHzClass II permissive change or modification of presently authorized equipment2009-12-31
824.2-848.8 MHzOriginal Equipment2009-11-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-08-27PDF 1.7 MB
User Manual 1Users Manual2010-12-18PDF 5 MB
User Manual 2Users Manual2010-12-18PDF 5.6 MB
User Manual 3Users Manual2010-12-18PDF 5.2 MB
User Manual 4Users Manual2010-12-18PDF 4.6 MB
User Manual 5Users Manual2010-12-18PDF 1.9 MB
Supplemental Users ManualUsers Manual2010-06-29PDF 9.9 KB
Supplemental Users ManualUsers Manual2010-05-17PDF 44.2 KB
HSPA ANT distanceInternal Photos2010-12-18PDF 237.4 KB
Internal PhotosInternal Photos2010-10-31PDF 365 KB
Internal PhotosInternal Photos2010-06-29PDF 418 KB
Internal PhotosInternal Photos2010-05-17PDF 362.9 KB
External PhotosExternal Photos2010-10-31PDF 303.1 KB
External PhotosExternal Photos2010-06-29PDF 217 KB
External PhotosExternal Photos2010-05-17PDF 338.9 KB
Label 1ID Label/Location Info2011-03-03PDF 366.8 KB
Label 2ID Label/Location Info2011-03-03PDF 367.7 KB
FCC ID LabelID Label/Location Info2010-06-22PDF 344 KB
FCC ID LabelID Label/Location Info2009-12-31PDF 61.3 KB
FCC ID Label and LocationID Label/Location Info2009-11-18PDF 435.9 KB
Photos Test SetupTest Setup Photos2011-08-27PDF 177.8 KB
SAR PhotosTest Setup Photos2010-12-18PDF 390.3 KB
Setup PhotosTest Setup Photos2010-12-18PDF 166.9 KB
Test Setup PhotographsTest Setup Photos2010-10-31PDF 289.1 KB
SAR Test Setup PhotosTest Setup Photos2010-06-29PDF 76.9 KB
Test Setup PhotosTest Setup Photos2010-06-29PDF 399.8 KB
Test Setup PhotosTest Setup Photos2010-05-17PDF 229.9 KB
Test ReportTest Report2011-03-03PDF 1.6 MB
Test ReportTest Report2010-06-22PDF 732.5 KB
Test ReportTest Report2010-05-04PDF 1.1 MB
Test ReportTest Report2009-12-31PDF 1.2 MB
MPE ReportRF Exposure Info2009-11-18PDF 110.7 KB
Test ReportTest Report2009-11-18PDF 1.6 MB
Agent AuthCover Letter(s)2011-03-03PDF 87 KB
C2PC LtrCover Letter(s)2011-03-03PDF 81.4 KB
Conf LtrCover Letter(s)2011-03-03PDF 88.3 KB
Authorization Letter 1Cover Letter(s)2010-06-22PDF 86.9 KB
Authorization Letter 2Cover Letter(s)2010-06-22PDF 24.1 KB
C2PC LetterCover Letter(s)2010-06-22PDF 81.4 KB
Confidentiality LetterCover Letter(s)2010-06-22PDF 65.1 KB
Class II Cover LetterCover Letter(s)2010-05-04PDF 31.2 KB
Confidentiality Request LetterCover Letter(s)2010-05-04PDF 22.5 KB
Class II Cover LetterCover Letter(s)2009-12-31PDF 40.4 KB
Confidentiality Request LetterCover Letter(s)2009-12-31PDF 22.5 KB
Notice of SupercedingCover Letter(s)2009-12-31PDF 80.1 KB
Confidentiality RequestCover Letter(s)2009-11-18PDF 20 KB
Supplemental Response to A3L91316Cover Letter(s)2009-11-18PDF 55.8 KB
DipoleRF Exposure Info2011-03-03PDF 618.6 KB
Probe 1900RF Exposure Info2011-03-03PDF 582.7 KB
Probe 800RF Exposure Info2011-03-03PDF 634.1 KB
SAR ReportRF Exposure Info2011-03-03PDF 2.6 MB
SAR ReportRF Exposure Info2010-06-22PDF 693.9 KB
SAR attachment 1RF Exposure Info2010-06-22PDF 537.5 KB
SAR attachment 2RF Exposure Info2010-06-22PDF 634.1 KB
SAR attachment 3RF Exposure Info2010-06-22PDF 582.7 KB
Revised RF Exposure InfoRF Exposure Info2009-12-31PDF 4 MB

Application Information

Application ID5n0zxV4XqQ7n0EuslZQz6Q==
Final Action Date2011-03-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019502772
ModelGTY3300
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionCellular/ PCS WCDMA/ GSM/ EDGE Module
Responsible PartyChan Ho Youn, General Manager, jjano.youn@samsung.com , 973-808-6362
Technical ContactThu Chan, Compliance Certification Services, Thu.Chan@CCSEMC.COM , (510) 771-1000
Non-Technical ContactThu Chan, Compliance Certification Services, Thu.Chan@CCSEMC.COM , (510) 771-1000
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailcertnotice@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/27/2011
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 2.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 1.047 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.324 W/kg; Part 24: 0.701 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.2 dBi. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Applications

Application IDDatePurpose
5n0zxV4XqQ7n0EuslZQz6Q==2011-03-03Class II permissive change or modification of presently authorized equipment
0SMXfbGQSGB9ei4nKYtgqA==2010-06-22Class II permissive change or modification of presently authorized equipment
cnH/FnoREL1Z8ozL2vPyCA==2010-05-04Class II permissive change or modification of presently authorized equipment
xfE/VE3OwlKBpvZt9mp8Hg==2009-12-31Class II permissive change or modification of presently authorized equipment
dMkBKLeSfHzLvaV6fFklvg==2009-11-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.8322.5ppm244KGXW22H
824.2-848.8 MHz0.4732.5ppm245G7W22H
824.2-848.8 MHz0.4732.5ppm245KG7W22H
826.4-846.6 MHz0.2472.5ppm4M14F9W22H
1850.2-1909.8 MHz0.9952.5ppm245KGXW24E
1850.2-1909.8 MHz0.422.5ppm242KG7W24E
1852.4-1907.6 MHz0.2632.5ppm4M13F9W24E

Grants

TCB Grant - Application xfE/VE3OwlKBpvZt9mp8Hg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 12/31/2009

Application Dated: 12/31/2009
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/PCS WCDMA/GSM/EDGE Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change.

Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 0.661 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.04 W/kg; Part 24: 0.04 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.


EAS Grant - Application xfE/VE3OwlKBpvZt9mp8Hg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 12/31/2009

Application Dated: 12/31/2009
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/PCS WCDMA/GSM/EDGE Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change.

Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 0.661 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.04 W/kg; Part 24: 0.04 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application dMkBKLeSfHzLvaV6fFklvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 11/18/2009

Application Dated: 11/18/2009
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Power output listed is conducted. This device is approved as a mobile transmitter with respect to RF exposure compliance, and may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.


EAS Grant - Application dMkBKLeSfHzLvaV6fFklvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 11/18/2009

Application Dated: 11/18/2009
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Power output listed is conducted. This device is approved as a mobile transmitter with respect to RF exposure compliance, and may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in this filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application cnH/FnoREL1Z8ozL2vPyCA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
Date of Grant: 05/04/2010

Application Dated: 05/04/2010
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/PCS WCDMA/GSM/EDGE Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change.

Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 0.661 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.04 W/kg; Part 24: 0.04 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.


EAS Grant - Application cnH/FnoREL1Z8ozL2vPyCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 05/04/2010

Application Dated: 05/04/2010
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/PCS WCDMA/GSM/EDGE Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change.

Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 0.661 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.04 W/kg; Part 24: 0.04 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.02 dBi.

This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application 5n0zxV4XqQ7n0EuslZQz6Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/03/2011

Application Dated: 02/28/2011
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change. Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 2.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 1.047 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.324 W/kg; Part 24: 0.701 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.2 dBi. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application 5n0zxV4XqQ7n0EuslZQz6Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 03/03/2011

Application Dated: 02/28/2011
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245KG7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change. Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 2.5 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 1.047 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.5 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.324 W/kg; Part 24: 0.701 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.2 dBi. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application 0SMXfbGQSGB9ei4nKYtgqA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/22/2010

Application Dated: 06/21/2010
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245G7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change. Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.0 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 1.047 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.0 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.07 W/kg; Part 24: 0.06 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.2 dBi. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application 0SMXfbGQSGB9ei4nKYtgqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 06/22/2010

Application Dated: 06/21/2010
 
Attention: Chan Ho Youn , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LGTY3300
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: PCS Licensed Transmitter
Notes: Cellular/ PCS WCDMA/ GSM/ EDGE Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.247 2.5  PM 4M14F9W
22H 824.2  -  848.8 1.832 2.5  PM 244KGXW
22H 824.2  -  848.8 0.473 2.5  PM 245G7W
24E 1852.4  -  1907.6 0.263 2.5  PM 4M13F9W
24E 1850.2  -  1909.8 0.995 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.42 2.5  PM 242KG7W

Class II Permissive Change. Power output listed is conducted. This permissive change establishes the most conservative antenna-to-user separation distance of 18.0 cm for Samsung Netbook/Notebook/Laptop PC usage. The highest radiated power levels measured in specific configurations shown under this FCC ID number are: Part 22- 1.698 W ERP; Part 24- 1.047 W EIRP. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into other specific final products may require the submission of a permissive change application, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication if appropriate, or a new application if appropriate. Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 18.0 cm antenna-to-user separation distance in this Netbook/Notebook/Laptop PC platform are: Part 22: 0.07 W/kg; Part 24: 0.06 W/kg. In mobile configurations with respect to RF Exposure compliance, this device may only be marketed to OEM installers. The antenna(s) used for this transmitter, as described in the filing, must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter except for those described in this filing. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Maximum permitted antenna gain/cable loss: Part 22: 7.96 dBi; Part 24: 3.2 dBi. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



Mail To: