Output power is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use condition is 0.22 W/kg ,TCB Grant - Application B553l6pJ+S2dSuT4KXEaeQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| Class II Permissive Change |
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application B553l6pJ+S2dSuT4KXEaeQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| Class II Permissive Change |
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 9Dj5zLWzDjehvf7qooO7VQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 06/27/2012
Application Dated: 06/27/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
1.489
|
2.5
PM
|
242KGXW
|
|
22H |
824.2
-
848.8
|
0.607
|
2.5
PM
|
244KG7W
|
|
22H |
826.4
-
846.6
|
0.127
|
2.5
PM
|
4M18F9W
|
|
24E |
1850.2
-
1909.8
|
1.271
|
2.5
PM
|
243KGXW
|
|
24E |
1850.2
-
1909.8
|
0.348
|
2.5
PM
|
243KG7W
|
|
24E |
1852.4
-
1907.6
|
0.256
|
2.5
PM
|
4M19F9W
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use condition is 0.63 W/kg, 0.77 W/kg, and 0.85 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application 9Dj5zLWzDjehvf7qooO7VQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 06/27/2012
Application Dated: 06/27/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
1.489
|
2.5
PM
|
242KGXW
|
|
22H |
824.2
-
848.8
|
0.607
|
2.5
PM
|
244KG7W
|
|
22H |
826.4
-
846.6
|
0.127
|
2.5
PM
|
4M18F9W
|
|
24E |
1850.2
-
1909.8
|
1.271
|
2.5
PM
|
243KGXW
|
|
24E |
1850.2
-
1909.8
|
0.348
|
2.5
PM
|
243KG7W
|
|
24E |
1852.4
-
1907.6
|
0.256
|
2.5
PM
|
4M19F9W
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use condition is 0.63 W/kg, 0.77 W/kg, and 0.85 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 7pvvKLQSa9dq0cPsGqKRtQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
1.489
|
2.5
PM
|
242KGXW
|
|
22H |
824.2
-
848.8
|
0.607
|
2.5
PM
|
244KG7W
|
|
22H |
826.4
-
848.8
|
0.127
|
2.5
PM
|
4M18F9W
|
|
24E |
1850.2
-
1909.8
|
1.271
|
2.5
PM
|
243KGXW
|
|
24E |
1850.2
-
1909.8
|
0.348
|
2.5
PM
|
243KG7W
|
|
24E |
1852.4
-
1907.6
|
0.256
|
2.5
PM
|
4M19F9W
|
| Class II Permissive Change
Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.93 W/kg , 0.77 W/kg, and 1.09 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application 7pvvKLQSa9dq0cPsGqKRtQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.2
-
848.8
|
1.489
|
2.5
PM
|
242KGXW
|
|
22H |
824.2
-
848.8
|
0.607
|
2.5
PM
|
244KG7W
|
|
22H |
826.4
-
848.8
|
0.127
|
2.5
PM
|
4M18F9W
|
|
24E |
1850.2
-
1909.8
|
1.271
|
2.5
PM
|
243KGXW
|
|
24E |
1850.2
-
1909.8
|
0.348
|
2.5
PM
|
243KG7W
|
|
24E |
1852.4
-
1907.6
|
0.256
|
2.5
PM
|
4M19F9W
|
| Class II Permissive Change
Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.93 W/kg , 0.77 W/kg, and 1.09 W/kg respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 5aw52rdGA3DPik3tHmx/qA==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 06/27/2012
Application Dated: 06/27/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 5aw52rdGA3DPik3tHmx/qA==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 06/27/2012
Application Dated: 06/27/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 4kHbEyiPpGM0xMBFYotfCw==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
Pine Brook, NJ 07058
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2412.0
-
2462.0
|
0.035
|
|
|
| Class II Permissive Change
Output power is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.28 W/kg , 0.10 W/kg, and 1.09 W/kg respectively. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4kHbEyiPpGM0xMBFYotfCw==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
|
|
Date of Grant: 10/10/2012
Application Dated: 10/10/2012
|
| |
| Attention: Chan Ho Youn , General Manager |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
A3LSGHS730G |
|
|
| Name of Grantee: |
Samsung Electronics Co Ltd |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
Cellular/PCS GSM/EDGE/WCDMA Phone with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2412.0
-
2462.0
|
0.035
|
|
|
| Class II Permissive Change
Output power is average conducted. This device is approved for use in the handset described in the filing. SAR compliance for body-worn operation is based on a separation distance of 1.5 cm between the unit and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.28 W/kg , 0.10 W/kg, and 1.09 W/kg respectively. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
|