FCC ID A3LSLS-BU103

Verizon 4G LTE Network Extender

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: SLSBU103
Latest application date: 2015-09-17

FCC ID Device Details

FCC IDA3LSLS-BU103
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeSLSBU103
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com
Equipment ClassVerizon 4G LTE Network Extender
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
751 MHzClass II permissive change or modification of presently authorized equipment2015-09-17
751 MHzOriginal Equipment2015-06-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-12-07PDF 1.1 MB
User Manual QSGUsers Manual2015-12-07PDF 494.3 KB
Internal PhotosInternal Photos2016-03-14PDF 3.2 MB
Internal PhotosInternal Photos2015-12-07PDF 3.4 MB
External PhotosExternal Photos2016-03-14PDF 1,001.1 KB
External PhotosExternal Photos2015-12-07PDF 437.1 KB
LabelID Label/Location Info2015-06-10PDF 696.9 KB
Label LocationID Label/Location Info2015-06-10PDF 40.3 KB
Test Setup Photos TNBTest Setup Photos2016-03-14PDF 139.2 KB
Test Setup PhotosTest Setup Photos2015-12-07PDF 217.2 KB
Test ReportTest Report2015-09-17PDF 3.2 MB
Test ReportTest Report2015-06-10PDF 3 MB
Class II Permissive Change LetterCover Letter(s)2015-09-17PDF 136.8 KB
Confidentiality LetterCover Letter(s)2015-09-17PDF 137.9 KB
POACover Letter(s)2015-09-17PDF 203.9 KB
Confidentiality Request LetterCover Letter(s)2015-06-10PDF 137.3 KB
DOC LetterCover Letter(s)2015-06-10PDF 115.8 KB
LTE Rel Cover LetterCover Letter(s)2015-06-10PDF 123.6 KB
POACover Letter(s)2015-06-10PDF 202.8 KB
RF Exposure InfoRF Exposure Info2015-09-17PDF 317.5 KB
RF ExposureRF Exposure Info2015-06-10PDF 323.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 257.2 KB
Schematics Metadata onlySchematicsPDF 1 MB
Schematics Metadata onlySchematicsPDF 1.1 MB
Schematics PCB Layout Metadata onlySchematicsPDF 230.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 191 KB
Operational Description Metadata onlyOperational DescriptionPDF 198.6 KB
Operational Description Antenna Report Metadata onlyOperational DescriptionPDF 621.8 KB
Operational Description Change Detail Metadata onlyOperational DescriptionPDF 106.8 KB
Operational Description Tune Up Metadata onlyOperational DescriptionPDF 77.6 KB
Tune Up Procedures Metadata onlyParts List/Tune Up InfoPDF 65.4 KB

Application Information

Application IDH8ky/fmhXNLSrvUxTttZHw==
Final Action Date2015-09-17
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005810205
ModelSLS-BU103
Frequency Range751 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionVerizon 4G LTE Network Extender
Responsible PartyJenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/14/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is EIRP above 1 GHz and ERP below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. (Date of Grant: 06/10/2015) Class II Permissive Change: This Class II Permissive Change is for the following reasons: remove resistor a CPU heat sink for GPS degradation, add CAP and schottky diodes for GPIO issue, add resistor a GPS bias choke for inductor damage, move CAP forward for TSSI accuracy issue, PAM change, add inductor to GND, and add EMI plate on antenna casing.

Applications

Application IDDatePurpose
H8ky/fmhXNLSrvUxTttZHw==2015-09-17Class II permissive change or modification of presently authorized equipment
4iEr4iVhwLqhW92acem+Ww==2015-06-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
751 MHz0.11250.5859ppm9M12G7D27MO
751 MHz0.10840.5859ppm9M18W7D27MO
751 MHz0.11170.5859ppm9M09W7D27MO
2115-2150 MHz0.4150.6134ppm9M12G7D27MO
2115-2150 MHz0.40930.6134ppm9M12W7D27MO
2115-2150 MHz0.41690.6134ppm9M06W7D27MO

Grants

TCB Grant - Application H8ky/fmhXNLSrvUxTttZHw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/17/2015

Application Dated: 09/16/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LSLS-BU103
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Verizon 4G LTE Network Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 2115.0  -  2150.0 0.415 0.6134  PM 9M12G7D
MO 27 2115.0  -  2150.0 0.4093 0.6134  PM 9M12W7D
MO 27 2115.0  -  2150.0 0.4169 0.6134  PM 9M06W7D
MO 27 751.0  -  751.0 0.1125 0.5859  PM 9M12G7D
MO 27 751.0  -  751.0 0.1084 0.5859  PM 9M18W7D
MO 27 751.0  -  751.0 0.1117 0.5859  PM 9M09W7D

Power listed is EIRP above 1 GHz and ERP below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. (Date of Grant: 06/10/2015)

Class II Permissive Change: This Class II Permissive Change is for the following reasons: remove resistor a CPU heat sink for GPS degradation, add CAP and schottky diodes for GPIO issue, add resistor a GPS bias choke for inductor damage, move CAP forward for TSSI accuracy issue, PAM change, add inductor to GND, and add EMI plate on antenna casing.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application H8ky/fmhXNLSrvUxTttZHw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 09/17/2015

Application Dated: 09/16/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LSLS-BU103
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Verizon 4G LTE Network Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 2115.0  -  2150.0 0.415 0.6134  PM 9M12G7D
MO 27 2115.0  -  2150.0 0.4093 0.6134  PM 9M12W7D
MO 27 2115.0  -  2150.0 0.4169 0.6134  PM 9M06W7D
MO 27 751.0  -  751.0 0.1125 0.5859  PM 9M12G7D
MO 27 751.0  -  751.0 0.1084 0.5859  PM 9M18W7D
MO 27 751.0  -  751.0 0.1117 0.5859  PM 9M09W7D

Power listed is EIRP above 1 GHz and ERP below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. (Date of Grant: 06/10/2015)

Class II Permissive Change: This Class II Permissive Change is for the following reasons: remove resistor a CPU heat sink for GPS degradation, add CAP and schottky diodes for GPIO issue, add resistor a GPS bias choke for inductor damage, move CAP forward for TSSI accuracy issue, PAM change, add inductor to GND, and add EMI plate on antenna casing.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 4iEr4iVhwLqhW92acem+Ww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/10/2015

Application Dated: 06/10/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LSLS-BU103
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Verizon 4G LTE Network Extender
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 2115.0  -  2150.0 0.415 0.6134  PM 9M12G7D
MO 27 2115.0  -  2150.0 0.4093 0.6134  PM 9M12W7D
MO 27 2115.0  -  2150.0 0.4169 0.6134  PM 9M06W7D
MO 27 751.0  -  751.0 0.1125 0.5859  PM 9M12G7D
MO 27 751.0  -  751.0 0.1084 0.5859  PM 9M18W7D
MO 27 751.0  -  751.0 0.1117 0.5859  PM 9M09W7D

Power listed is EIRP above 1 GHz and ERP below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4iEr4iVhwLqhW92acem+Ww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 06/10/2015

Application Dated: 06/10/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LSLS-BU103
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Verizon 4G LTE Network Extender
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 27 2115.0  -  2150.0 0.415 0.6134  PM 9M12G7D
MO 27 2115.0  -  2150.0 0.4093 0.6134  PM 9M12W7D
MO 27 2115.0  -  2150.0 0.4169 0.6134  PM 9M06W7D
MO 27 751.0  -  751.0 0.1125 0.5859  PM 9M12G7D
MO 27 751.0  -  751.0 0.1084 0.5859  PM 9M18W7D
MO 27 751.0  -  751.0 0.1117 0.5859  PM 9M09W7D

Power listed is EIRP above 1 GHz and ERP below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: