FCC ID A3LSLS-BU10A

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 11/14/2016 Application Dated: 11/14/2016

Samsung Electronics Co Ltd

19 Chapin Rd., Building D

Pine Brook, NJ 07058

Attention: Jenni Chun , General Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	A3LSLS-BU10A
Name of Grantee:	Samsung Electronics Co Ltd
Equipment Class:	PCS Licensed Transmitter
Notes:	uFemto

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	24E	1932.5  -  1987.0	0.586	0.001  PM	4M44G7D
	24E	1932.5  -  1987.0	0.602	0.001  PM	4M45W7D
MO	24E	1935.0  -  1985.0	0.601	0.001  PM	8M96G7D
MO	24E	1935.0  -  1985.0	0.596	0.001  PM	8M96W7D
MO	24E	1937.5  -  1982.5	0.618	0.001  PM	13M4G7D
MO	24E	1937.5  -  1982.5	0.594	0.001  PM	13M4W7D
MO	24E	1940.0  -  1980.0	0.596	0.001  PM	18M0G7D
MO	24E	1940.0  -  1980.0	0.602	0.001  PM	18M0W7D
MO	27	2112.5  -  2177.5	0.571	0.001  PM	4M44G7D
MO	27	2112.5  -  2177.5	0.583	0.001  PM	4M45W7D
MO	27	2115.0  -  2175.0	0.561	0.001  PM	8M96G7D
MO	27	2115.0  -  2175.0	0.562	0.001  PM	8M97W7D
MO	27	2117.5  -  2172.5	0.576	0.001  PM	13M4G7D
MO	27	2117.5  -  2172.5	0.561	0.001  PM	13M4W7D
MO	27	2120.0  -  2170.0	0.576	0.001  PM	18M0G7D
MO	27	2120.0  -  2170.0	0.561	0.001  PM	18M0W7D

Power listed is conducted. The device supports LTE-FDD with 2x2 MIMO. This device has 5, 10, 15, and 20MHz bandwidth modes. The single unit RF Exposure compliance for the device was based on maximum antenna gain 4dBi and minimum separation distance 20cm respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States

Date of Grant: 11/14/2016 Application Dated: 11/14/2016

Attention: Jenni Chun , General Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	A3LSLS-BU10A
Name of Grantee:	Samsung Electronics Co Ltd
Equipment Class:	PCS Licensed Transmitter
Notes:	uFemto
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	24E	1932.5  -  1987.0	0.586	0.001  PM	4M44G7D
	24E	1932.5  -  1987.0	0.602	0.001  PM	4M45W7D
MO	24E	1935.0  -  1985.0	0.601	0.001  PM	8M96G7D
MO	24E	1935.0  -  1985.0	0.596	0.001  PM	8M96W7D
MO	24E	1937.5  -  1982.5	0.618	0.001  PM	13M4G7D
MO	24E	1937.5  -  1982.5	0.594	0.001  PM	13M4W7D
MO	24E	1940.0  -  1980.0	0.596	0.001  PM	18M0G7D
MO	24E	1940.0  -  1980.0	0.602	0.001  PM	18M0W7D
MO	27	2112.5  -  2177.5	0.571	0.001  PM	4M44G7D
MO	27	2112.5  -  2177.5	0.583	0.001  PM	4M45W7D
MO	27	2115.0  -  2175.0	0.561	0.001  PM	8M96G7D
MO	27	2115.0  -  2175.0	0.562	0.001  PM	8M97W7D
MO	27	2117.5  -  2172.5	0.576	0.001  PM	13M4G7D
MO	27	2117.5  -  2172.5	0.561	0.001  PM	13M4W7D
MO	27	2120.0  -  2170.0	0.576	0.001  PM	18M0G7D
MO	27	2120.0  -  2170.0	0.561	0.001  PM	18M0W7D

Power listed is conducted. The device supports LTE-FDD with 2x2 MIMO. This device has 5, 10, 15, and 20MHz bandwidth modes. The single unit RF Exposure compliance for the device was based on maximum antenna gain 4dBi and minimum separation distance 20cm respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F621bvvGFW86HS17mEHTHQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131

Date of Grant: 11/14/2016 Application Dated: 11/14/2016

Samsung Electronics Co Ltd

19 Chapin Rd., Building D

Pine Brook, NJ 07058

Attention: Jenni Chun , General Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	A3LSLS-BU10A
Name of Grantee:	Samsung Electronics Co Ltd
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	uFemto

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.091
38 CC	15E	5745.0  -  5825.0	0.283

Power listed is conducted. This device has 20 MHz bandwidth mode. This device is restricted to indoor use only. The single unit RF Exposure compliance for the device was based on maximum antenna gain 4dBi and minimum separation distance 20cm respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States

Date of Grant: 11/14/2016 Application Dated: 11/14/2016

Attention: Jenni Chun , General Manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	A3LSLS-BU10A
Name of Grantee:	Samsung Electronics Co Ltd
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	uFemto
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC	15E	5180.0  -  5240.0	0.091
38 CC	15E	5745.0  -  5825.0	0.283

Power listed is conducted. This device has 20 MHz bandwidth mode. This device is restricted to indoor use only. The single unit RF Exposure compliance for the device was based on maximum antenna gain 4dBi and minimum separation distance 20cm respectively. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antenna or transmitter. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. The antenna(s) used for this transmitter must be fixed-mounted on permanent structures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: