SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd

Samsung Electronics Co Ltd GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC

Page 1 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 2 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 3 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 4 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 5 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 6 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 7 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 8 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 9 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 10 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 11 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 12 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 13 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 14 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 15 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 16 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 17 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 18 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 19 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 20 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 21 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 22 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 23 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 24 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 25 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 26 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 27 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 28 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 29 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 30 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 31 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Page 32 of SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd

Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 7:48:08 PM
GSM850 2 slots
Frequency: 836.6 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.94 S/m; εr = 40.17; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.02, 10.02, 10.02) @ 836.6 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Touch_GPRS 2 slots_ch 190/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.235 W/kg
RHS/Touch_GPRS 2 slots_ch 190/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 15.54 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 0.254 W/kg
SAR(1 g) = 0.199 W/kg; SAR(10 g) = 0.149 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.235 W/kg
0 dB = 0.235 W/kg = -6.29 dBW/kg
Plot No. 1
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 10:38:24 PM
GSM850 2 slots
Frequency: 836.6 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.989 S/m; εr = 55.186; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 836.6 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/GPRS 2 slots_ch 190_15mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.291 W/kg
Rear/GPRS 2 slots_ch 190_15mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 16.37 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.470 W/kg
SAR(1 g) = 0.267 W/kg; SAR(10 g) = 0.153 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.373 W/kg
Rear/GPRS 2 slots_ch 190_15mm/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 16.37 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.260 W/kg
SAR(1 g) = 0.186 W/kg; SAR(10 g) = 0.136 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.232 W/kg
0 dB = 0.232 W/kg = -6.35 dBW/kg
Plot No. 2
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 11:27:39 PM
GSM850 2 slots
Frequency: 848.8 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 848.8 MHz; σ = 0.994 S/m; εr = 55.198; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 848.8 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/GPRS 2 slots_ch 251_10mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.755 W/kg
Rear/GPRS 2 slots_ch 251_10mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 25.24 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 1.39 W/kg
SAR(1 g) = 0.724 W/kg; SAR(10 g) = 0.387 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 1.06 W/kg
0 dB = 1.06 W/kg = 0.25 dBW/kg
Plot No. 3
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 5:56:22 PM,
GSM1900 2 slots
Frequency: 1880 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.408 S/m; εr = 38.334; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1957
LHS/Touch_GPRS 2 slots_ch 661/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.0692 W/kg
LHS/Touch_GPRS 2 slots_ch 661/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 6.624 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 0.0860 W/kg
SAR(1 g) = 0.052 W/kg; SAR(10 g) = 0.032 W/kg
Maximum value of SAR (measured) = 0.0731 W/kg
0 dB = 0.0731 W/kg = -11.36 dBW/kg
Plot No. 4
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 4:46:32 PM,
GSM1900 2 slots
Frequency: 1880 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.561 S/m; εr = 51.752; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.81, 7.81, 7.81) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/GPRS 2 slots_ch 661_15mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.0883 W/kg
Rear/GPRS 2 slots_ch 661_15mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 6.888 V/m; Power Drift = 0.19 dB
Peak SAR (extrapolated) = 0.126 W/kg
SAR(1 g) = 0.064 W/kg; SAR(10 g) = 0.034 W/kg
Maximum value of SAR (measured) = 0.102 W/kg
0 dB = 0.102 W/kg = -9.91 dBW/kg
Plot No. 5
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 5:04:05 PM,
GSM1900 2 slots
Frequency: 1880 MHz; Duty Cycle: 1:4.00037;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.561 S/m; εr = 51.752; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.81, 7.81, 7.81) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/GPRS 2 slots_ch 661_10mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.208 W/kg
Rear/GPRS 2 slots_ch 661_10mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 10.39 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 0.321 W/kg
SAR(1 g) = 0.145 W/kg; SAR(10 g) = 0.070 W/kg
Maximum value of SAR (measured) = 0.258 W/kg
0 dB = 0.258 W/kg = -5.88 dBW/kg
Plot No. 6
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 8:16:26 PM,
W-CDMA Band II
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.408 S/m; εr = 38.334; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.99, 7.99, 7.99) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1957
LHS/Touch_RMC Rel. 99_ch 9400/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.160 W/kg
LHS/Touch_RMC Rel. 99_ch 9400/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 9.933 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.200 W/kg
SAR(1 g) = 0.122 W/kg; SAR(10 g) = 0.074 W/kg
Maximum value of SAR (measured) = 0.171 W/kg
0 dB = 0.171 W/kg = -7.67 dBW/kg
Plot No. 7
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 8:45:44 PM,
W-CDMA Band II
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.561 S/m; εr = 51.752; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.81, 7.81, 7.81) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/RMC Rel. 99_ch 9400_15mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.150 W/kg
Rear/RMC Rel. 99_ch 9400_15mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 9.100 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.247 W/kg
SAR(1 g) = 0.125 W/kg; SAR(10 g) = 0.066 W/kg
Maximum value of SAR (measured) = 0.200 W/kg
0 dB = 0.200 W/kg = -6.99 dBW/kg
Plot No. 8
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 9:02:57 PM,
W-CDMA Band II
Frequency: 1880 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 1880 MHz; σ = 1.561 S/m; εr = 51.752; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.81, 7.81, 7.81) @ 1880 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/RMC Rel. 99_ch 9400_10mm/Area Scan (9x15x1): Measurement grid: dx=15mm, dy=15mm
Maximum value of SAR (measured) = 0.327 W/kg
Rear/RMC Rel. 99_ch 9400_10mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 13.03 V/m; Power Drift = 0.12 dB
Peak SAR (extrapolated) = 0.628 W/kg
SAR(1 g) = 0.286 W/kg; SAR(10 g) = 0.139 W/kg
Maximum value of SAR (measured) = 0.481 W/kg
0 dB = 0.481 W/kg = -3.18 dBW/kg
Plot No. 9
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 7:04:05 PM
W-CDMA Band V
Frequency: 836.6 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.94 S/m; εr = 40.17; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.02, 10.02, 10.02) @ 836.6 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Touch_RMC Rel. 99_ch 4183/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.196 W/kg
RHS/Touch_RMC Rel. 99_ch 4183/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 14.17 V/m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 0.215 W/kg
SAR(1 g) = 0.167 W/kg; SAR(10 g) = 0.125 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.198 W/kg
0 dB = 0.198 W/kg = -7.03 dBW/kg
Plot No. 10
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 4:17:29 PM
W-CDMA Band V
Frequency: 836.6 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.989 S/m; εr = 55.186; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 836.6 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/RMC Rel. 99_ch 4183_15mm/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.307 W/kg
Rear/RMC Rel. 99_ch 4183_15mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 16.31 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 0.390 W/kg
SAR(1 g) = 0.215 W/kg; SAR(10 g) = 0.122 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.321 W/kg
0 dB = 0.321 W/kg = -4.93 dBW/kg
Plot No. 11
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/20/2018 4:46:09 PM
W-CDMA Band V
Frequency: 836.6 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.6 MHz; σ = 0.989 S/m; εr = 55.186; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 836.6 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/RMC Rel. 99_ch 4183_10mm/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.607 W/kg
Rear/RMC Rel. 99_ch 4183_10mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 22.88 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 0.994 W/kg
SAR(1 g) = 0.507 W/kg; SAR(10 g) = 0.269 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.790 W/kg
0 dB = 0.790 W/kg = -1.02 dBW/kg
Plot No. 12
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/21/2018 10:02:51 AM
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.94 S/m; εr = 40.17; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.02, 10.02, 10.02) @ 836.5 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Touch_QPSK RB 1,0 Ch 20525/Area Scan (8x13x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.202 W/kg
RHS/Touch_QPSK RB 1,0 Ch 20525/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 14.46 V/m; Power Drift = 0.09 dB
Peak SAR (extrapolated) = 0.218 W/kg
SAR(1 g) = 0.173 W/kg; SAR(10 g) = 0.131 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.202 W/kg
0 dB = 0.202 W/kg = -6.95 dBW/kg
Plot No. 13
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/21/2018 12:31:32 PM
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.989 S/m; εr = 55.186; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 836.5 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/QPSK RB 1,0 Ch 20525_15mm/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.265 W/kg
Rear/QPSK RB 1,0 Ch 20525_15mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 15.00 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 0.341 W/kg
SAR(1 g) = 0.192 W/kg; SAR(10 g) = 0.110 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.284 W/kg
Rear/QPSK RB 1,0 Ch 20525_15mm/Zoom Scan 2 (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 15.00 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 0.231 W/kg
SAR(1 g) = 0.166 W/kg; SAR(10 g) = 0.124 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.206 W/kg
0 dB = 0.206 W/kg = -6.86 dBW/kg
Plot No. 14
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/21/2018 1:20:33 PM
LTE Band 5
Frequency: 836.5 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 836.5 MHz; σ = 0.989 S/m; εr = 55.186; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(10.01, 10.01, 10.01) @ 836.5 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/QPSK RB 1,0 Ch 20525_10mm/Area Scan (8x14x1): Measurement grid: dx=15mm, dy=15mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.714 W/kg
Rear/QPSK RB 1,0 Ch 20525_10mm/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm,
dy=8mm, dz=5mm
Reference Value = 24.54 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 0.889 W/kg
SAR(1 g) = 0.455 W/kg; SAR(10 g) = 0.245 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.723 W/kg
0 dB = 0.723 W/kg = -1.41 dBW/kg
Plot No. 15
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/21/2018 10:48:33 AM
LTE Band 41
Frequency: 2593 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2593 MHz; σ = 1.943 S/m; εr = 38.471; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.05, 7.05, 7.05) @ 2593 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1957
RHS/Touch_QPSK RB 1,99 Ch 40620/Area Scan (10x16x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.610 W/kg
RHS/Touch_QPSK RB 1,99 Ch 40620/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 16.85 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.754 W/kg
SAR(1 g) = 0.404 W/kg; SAR(10 g) = 0.213 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.618 W/kg
0 dB = 0.618 W/kg = -2.09 dBW/kg
Plot No. 16
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/20/2018 9:22:48 PM
LTE Band 41
Frequency: 2593 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2593 MHz; σ = 2.191 S/m; εr = 50.35; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.33, 7.33, 7.33) @ 2593 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Front/QPSK RB 1,99 Ch 40620_15mm/Area Scan (10x17x1): Measurement grid: dx=12mm,
dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.390 W/kg
Front/QPSK RB 1,99 Ch 40620_15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 12.24 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 0.525 W/kg
SAR(1 g) = 0.262 W/kg; SAR(10 g) = 0.136 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.420 W/kg
0 dB = 0.420 W/kg = -3.77 dBW/kg
Plot No. 17
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/20/2018 10:05:18 PM,
LTE Band 41
Frequency: 2593 MHz; Duty Cycle: 1:1.59956;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2593 MHz; σ = 2.191 S/m; εr = 50.35; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(7.33, 7.33, 7.33) @ 2593 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Front/QPSK RB 1,99 Ch 40620_10mm/Area Scan (10x17x1): Measurement grid: dx=12mm,
dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.726 W/kg
Front/QPSK RB 1,99 Ch 40620_10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 16.63 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 1.02 W/kg
SAR(1 g) = 0.504 W/kg; SAR(10 g) = 0.254 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.805 W/kg
0 dB = 0.805 W/kg = -0.94 dBW/kg
Plot No. 18
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/21/2018 7:41:24 PM
Wi-Fi 2.4GHz
Frequency: 2412 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2412 MHz; σ = 1.756 S/m; εr = 39.591; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(7.92, 7.92, 7.92) @ 2412 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Tilt_802.11b_ch 1/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.437 W/kg
RHS/Tilt_802.11b_ch 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 13.57 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 0.533 W/kg
SAR(1 g) = 0.251 W/kg; SAR(10 g) = 0.108 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.414 W/kg
0 dB = 0.414 W/kg = -3.83 dBW/kg
Plot No. 19
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/23/2018 11:09:49 AM
Wi-Fi 2.4GHz
Frequency: 2457 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2457 MHz; σ = 2.026 S/m; εr = 51.095; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(7.72, 7.72, 7.72) @ 2457 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11b_ch 10_15mm/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.348 W/kg
Rear/802.11b_ch 10_15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 12.15 V/m; Power Drift = 0.10 dB
Peak SAR (extrapolated) = 0.470 W/kg
SAR(1 g) = 0.239 W/kg; SAR(10 g) = 0.129 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.377 W/kg
0 dB = 0.377 W/kg = -4.24 dBW/kg
Plot No. 20
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/23/2018 10:32:31 AM
Wi-Fi 2.4GHz
Frequency: 2457 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2457 MHz; σ = 2.026 S/m; εr = 51.095; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(7.72, 7.72, 7.72) @ 2457 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11b_ch 10_10mm/Area Scan (11x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.718 W/kg
Rear/802.11b_ch 10_10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,
dz=5mm
Reference Value = 17.18 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 1.09 W/kg
SAR(1 g) = 0.528 W/kg; SAR(10 g) = 0.267 W/kg
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.856 W/kg
0 dB = 0.856 W/kg = -0.68 dBW/kg
Plot No. 21
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/22/2018 9:22:07 PM
Wi-Fi 5.2 GHz
Frequency: 5220 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5220 MHz; σ = 5.327 S/m; εr = 47.329; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(4.83, 4.83, 4.83) @ 5220 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Edge 1/802.11a_Ch 44/Area Scan (10x10x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 1.20 W/kg
Edge 1/802.11a_Ch 44/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=2mm
Reference Value = 13.75 V/m; Power Drift = 0.04 dB
Peak SAR (extrapolated) = 1.99 W/kg
SAR(1 g) = 0.559 W/kg; SAR(10 g) = 0.198 W/kg
Maximum value of SAR (measured) = 1.22 W/kg
0 dB = 1.22 W/kg = 0.86 dBW/kg
Plot No. 22
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/22/2018 7:25:27 PM
Wi-Fi 5.3GHz
Frequency: 5290 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5290 MHz; σ = 4.54 S/m; εr = 35.517; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(5.45, 5.45, 5.45) @ 5290 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Tilt_802.11ac VHT80_Ch 58/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 1.23 W/kg
RHS/Tilt_802.11ac VHT80_Ch 58/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 14.28 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 2.04 W/kg
SAR(1 g) = 0.461 W/kg; SAR(10 g) = 0.130 W/kg
Maximum value of SAR (measured) = 1.20 W/kg
0 dB = 1.20 W/kg = 0.79 dBW/kg
Plot No. 23
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/22/2018 2:57:27 PM
Wi-Fi 5.3GHz
Frequency: 5320 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5320 MHz; σ = 5.467 S/m; εr = 47.142; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(4.83, 4.83, 4.83) @ 5320 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11a_Ch 64_15mm/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.570 W/kg
Rear/802.11a_Ch 64_15mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 9.297 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 1.02 W/kg
SAR(1 g) = 0.280 W/kg; SAR(10 g) = 0.102 W/kg
Maximum value of SAR (measured) = 0.604 W/kg
0 dB = 0.604 W/kg = -2.19 dBW/kg
Plot No. 24
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/22/2018 4:36:55 PM
Wi-Fi 5.3GHz
Frequency: 5320 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5320 MHz; σ = 5.467 S/m; εr = 47.142; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(4.83, 4.83, 4.83) @ 5320 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11a_Ch 64_0mm/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 10.6 W/kg
Rear/802.11a_Ch 64_0mm/Zoom Scan (8x8x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 39.05 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 20.6 W/kg
SAR(1 g) = 4.04 W/kg; SAR(10 g) = 0.940 W/kg
Maximum value of SAR (measured) = 11.2 W/kg
0 dB = 11.2 W/kg = 10.49 dBW/kg
Plot No. 25
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/22/2018 4:38:42 PM,
Wi-Fi 5.6GHz
Frequency: 5530 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5530 MHz; σ = 5.745 S/m; εr = 47.742; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(4.08, 4.08, 4.08) @ 5530 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1957
LHS/Tilt_802.11ac VHT80_Ch 106/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 1.58 W/kg
LHS/Tilt_802.11ac VHT80_Ch 106/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 14.72 V/m; Power Drift = -0.02 dB
Peak SAR (extrapolated) = 2.79 W/kg
SAR(1 g) = 0.694 W/kg; SAR(10 g) = 0.236 W/kg
Maximum value of SAR (measured) = 1.67 W/kg
0 dB = 1.67 W/kg = 2.23 dBW/kg
Plot No. 26
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/22/2018 2:13:35 PM
Wi-Fi 5.6GHz
Frequency: 5720 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5720 MHz; σ = 6.023 S/m; εr = 47.401; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(4.29, 4.29, 4.29) @ 5720 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11a_Ch 144_15mm/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.570 W/kg
Rear/802.11a_Ch 144_15mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 8.269 V/m; Power Drift = 0.08 dB
Peak SAR (extrapolated) = 1.20 W/kg
SAR(1 g) = 0.259 W/kg; SAR(10 g) = 0.101 W/kg
Maximum value of SAR (measured) = 0.609 W/kg
0 dB = 0.609 W/kg = -2.15 dBW/kg
Plot No. 27
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/22/2018 3:13:22 PM,
Wi-Fi 5.6GHz
Frequency: 5720 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5720 MHz; σ = 6.023 S/m; εr = 47.401; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(4.29, 4.29, 4.29) @ 5720 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11a_Ch 144_0mm/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 9.68 W/kg
Rear/802.11a_Ch 144_0mm/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 34.41 V/m; Power Drift = 0.02 dB
Peak SAR (extrapolated) = 20.9 W/kg
SAR(1 g) = 3.43 W/kg; SAR(10 g) = 0.787 W/kg
Maximum value of SAR (measured) = 10.3 W/kg
0 dB = 10.3 W/kg = 10.13 dBW/kg
Plot No. 28
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/22/2018 8:34:10 PM,
Wi-Fi 5.8GHz
Frequency: 5775 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5775 MHz; σ = 5.135 S/m; εr = 35.865; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018d
- Probe: EX3DV4 - SN3885; ConvF(4.8, 4.8, 4.8) @ 5775 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1957
RHS/Tilt_802.11ac VHT80_Ch 155/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.774 W/kg
RHS/Tilt_802.11ac VHT80_Ch 155/Zoom Scan (7x7x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 9.686 V/m; Power Drift = 0.07 dB
Peak SAR (extrapolated) = 1.93 W/kg
SAR(1 g) = 0.395 W/kg; SAR(10 g) = 0.114 W/kg
Maximum value of SAR (measured) = 1.05 W/kg
0 dB = 1.05 W/kg = 0.21 dBW/kg
Plot No. 29
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/22/2018 11:54:47 PM,
Wi-Fi 5.8GHz
Frequency: 5785 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5785 MHz; σ = 6.116 S/m; εr = 47.271; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(4.29, 4.29, 4.29) @ 5785 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Rear/802.11a_Ch 157_15mm/Area Scan (11x20x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 0.552 W/kg
Rear/802.11a_Ch 157_15mm/Zoom Scan (9x9x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 8.919 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 1.13 W/kg
SAR(1 g) = 0.276 W/kg; SAR(10 g) = 0.107 W/kg
Maximum value of SAR (measured) = 0.678 W/kg
0 dB = 0.678 W/kg = -1.69 dBW/kg
Plot No. 30
Test Laboratory: UL Verification Services Inc. SAR Lab 6
Date/Time: 8/23/2018 9:25:52 AM,
Wi-Fi 5.8GHz
Frequency: 5825 MHz; Duty Cycle: 1:1;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used: f = 5825 MHz; σ = 6.18 S/m; εr = 47.209; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1545; Calibrated: 4/13/2018
- Probe: EX3DV4 - SN3885; ConvF(4.29, 4.29, 4.29) @ 5825 MHz; Calibrated: 10/24/2017
- Sensor-Surface: 1.4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), Sensor-Surface: 1.4mm
(Mechanical Surface Detection)
- Phantom: ELI V8.0 (20deg probe tilt) Front; Type: QD OVA 004 AA; Serial: 2081
Edge 1/802.11a_Ch 165_10mm/Area Scan (8x11x1): Measurement grid: dx=10mm, dy=10mm
Maximum value of SAR (measured) = 1.89 W/kg
Edge 1/802.11a_Ch 165_10mm/Zoom Scan (9x9x12)/Cube 0: Measurement grid: dx=4mm, dy=4mm,
dz=2mm
Reference Value = 14.43 V/m; Power Drift = 0.05 dB
Peak SAR (extrapolated) = 3.92 W/kg
SAR(1 g) = 0.862 W/kg; SAR(10 g) = 0.317 W/kg
Maximum value of SAR (measured) = 2.04 W/kg
0 dB = 2.04 W/kg = 3.10 dBW/kg
Plot No. 31
Test Laboratory: UL Verification Services Inc. SAR Lab 5
Date/Time: 8/22/2018 8:38:58 AM
Bluetooth
Frequency: 2441 MHz; Duty Cycle: 1:1.29033;
Room Ambient Temperature: 24.0°C; Liquid Temperature: 23.0°C
Medium parameters used (interpolated): f = 2441 MHz; σ = 1.778 S/m; εr = 39.525; ρ = 1000 kg/m3
DASY5 Configuration:
- Area Scan Setting: Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg
- Electronics: DAE4 Sn1546; Calibrated: 5/3/2018
- Probe: EX3DV4 - SN7498; ConvF(7.92, 7.92, 7.92) @ 2441 MHz; Calibrated: 5/4/2018
- Sensor-Surface: 1.4mm (Mechanical Surface Detection)
- Phantom: Twin-SAM V8.0 (20deg probe tilt); Type: QD 000 P41 AA; Serial: 1956
RHS/Tilt_GFSK DH5_ch 39/Area Scan (10x17x1): Measurement grid: dx=12mm, dy=12mm
Info: Interpolated medium parameters used for SAR evaluation.
Maximum value of SAR (measured) = 0.00233 W/kg
0 dB = 0.00233 W/kg = -26.33 dBW/kg
Plot No. 32
Download: SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMA750FN GSM/WCDMA/LTE Phone with BT, DTS/UNII a/b/g/n/ac, ANT+ and NFC RF Exposure Info 12440876-S1V1 Appendix C Samsung Electronics Co Ltd
Document ID4002322
Application ID+iI/AX1RgCUdCVKn6Xp7Wg==
Document Description12440876-S1V1 Appendix C
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize74.54kB (931719 bits)
Date Submitted2018-09-12 00:00:00
Date Available2018-09-13 00:00:00
Creation Date2018-09-06 10:42:16
Producing SoftwareAdobe PDF Library 15.0
Document Lastmod2018-09-06 10:42:24
Document Title12440876-S1V1 Appendix C
Document CreatorAcrobat PDFMaker 15 for Word
Document Author: John

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : John
Company                         : ccs
Create Date                     : 2018:09:06 10:42:16-07:00
Modify Date                     : 2018:09:06 10:42:24-07:00
Source Modified                 : D:20180906174202
Language                        : EN-US
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2018:09:06 10:42:24-07:00
Creator Tool                    : Acrobat PDFMaker 15 for Word
Document ID                     : uuid:dcc1922e-298e-483f-9dc7-563af09769ca
Instance ID                     : uuid:4b4780c0-2f0a-456a-a54e-4bda161aea6d
Subject                         : 4
Format                          : application/pdf
Title                           : Date/Time: 1/13/2011 12:26:38 AM, Date/Time: 1/13/2011 12:35:24 AM
Creator                         : John
Producer                        : Adobe PDF Library 15.0
Page Layout                     : OneColumn
Page Count                      : 32