FCC ID A3LWCA735M

Wi-Fi/BT Transceiver

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: WCA735M
Latest application date: 2020-12-27

FCC ID Device Details

FCC IDA3LWCA735M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeWCA735M
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com
Equipment ClassWi-Fi/BT Transceiver
Test FirmONETECH Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-12-27
2402-2480 MHzOriginal Equipment2020-12-27
5180-5240 MHzOriginal Equipment2020-12-27

Exhibits

DocumentTypeAvailableFile
User-ManualUsers Manual2021-06-26PDF 482.2 KB
User_MunaulUsers Manual2021-06-26PDF 482.2 KB
Internal PhotosInternal Photos2021-06-26PDF 449.9 KB
Internal_photosInternal Photos2021-06-26PDF 449.9 KB
Ext_PhotosExternal Photos2021-06-26PDF 537.6 KB
External_photosExternal Photos2021-06-26PDF 537.6 KB
Label_and_Label_LocationID Label/Location Info2020-12-27PDF 154.7 KB
Label_locationID Label/Location Info2020-12-27PDF 154.7 KB
Test_Setup_PhotosTest Setup Photos2021-06-26PDF 274.3 KB
FCC(Cer)Bluetooth LE_2011004823_Samsung_WCA735M_Revision 01Test Report2020-12-27PDF 3.7 MB
FCC(Cer)Bluetooth_2011004823_Samsung_WCA735M_Revision 01_1Test Report2020-12-27PDF 2.8 MB
FCC(Cer)Bluetooth_2011004823_Samsung_WCA735M_Revision 01_2Test Report2020-12-27PDF 3.9 MB
FCC(Cer)WLAN 2G_2011004823_Samsung_WCA735M_Revision 01_1Test Report2020-12-27PDF 5.7 MB
FCC(Cer)WLAN 2G_2011004823_Samsung_WCA735M_Revision 01_2Test Report2020-12-27PDF 4.9 MB
FCC(Cer)WLAN 2G_2011004823_Samsung_WCA735M_Revision 01_3Test Report2020-12-27PDF 5.4 MB
FCC(Cer)WLAN 5G_2011004823_Samsung_WCA735M_Revision 02_1Test Report2020-12-27PDF 4.9 MB
FCC(Cer)WLAN 5G_2011004823_Samsung_WCA735M_Revision 02_2Test Report2020-12-27PDF 5.4 MB
FCC(Cer)WLAN 5G_2011004823_Samsung_WCA735M_Revision 02_3Test Report2020-12-27PDF 5.5 MB
FCC(Cer)WLAN 5G_2011004823_Samsung_WCA735M_Revision 02_4Test Report2020-12-27PDF 4 MB
FCC Long Term Confidentiality Request Rev4.1Cover Letter(s)2020-12-27PDF 21.6 KB
FCC Modular Approval Request Rev2.0Cover Letter(s)2020-12-27PDF 22.7 KB
FCC Software Configuration Control DeclarationCover Letter(s)2020-12-27PDF 16.1 KB
FCC_Long_Term_Only_ConfidentialityCover Letter(s)2020-12-27PDF 21.6 KB
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s)2020-12-27PDF 21.6 KB
Letter of AuthorizationCover Letter(s)2020-12-27PDF 51.5 KB
FCC(EMF)_2011004823_Samsung_WCA735MRF Exposure Info2020-12-27PDF 315.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 45.8 KB
block_diagram Metadata onlyBlock DiagramPDF 45.8 KB
SCH Metadata onlySchematicsPDF 375.4 KB
Schematic Metadata onlySchematicsPDF 375.4 KB
Operation_Description Metadata onlyOperational DescriptionPDF 2.1 MB
Operational Description Metadata onlyOperational DescriptionPDF 2.1 MB
operation_description Metadata onlyOperational DescriptionPDF 2.1 MB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 149.3 KB
Part_List Metadata onlyParts List/Tune Up InfoPDF 195.4 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 195.4 KB

Application Information

Application IDxDqlCeZ6xcHWYSjlN4G5bQ==
Final Action Date2020-12-27
Application PurposeOriginal Equipment
Applicant FRN0027908797
ModelWCA735M
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWi-Fi/BT Transceiver
Responsible PartyJenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375
Technical ContactSamsung Electronics Co Ltd, j1.chun@samsung.com
Test FirmKi Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr , 82-31-799-9580
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/26/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
xDqlCeZ6xcHWYSjlN4G5bQ==2020-12-27Original Equipment
WVjAAhKMeE7imw5M/2v7Vw==2020-12-27Original Equipment
B3upD7bV/5leEQBSEUCSfA==2020-12-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0158115CCC
2402-2480 MHz0.015630015CCC
2412-2472 MHz0.0647115CCC, MO
5180-5240 MHz0.0352415E38, CC, MO
5260-5320 MHz0.0677615E38, CC, MO, ND
5500-5720 MHz0.0615215E38, CC, MO, ND
5745-5825 MHz0.061815E38, CC, MO

Grants

TCB Grant - Application xDqlCeZ6xcHWYSjlN4G5bQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/27/2020

Application Dated: 12/27/2020
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01563  

Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xDqlCeZ6xcHWYSjlN4G5bQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 12/27/2020

Application Dated: 12/27/2020
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01563  

Output power listed is conducted power. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application WVjAAhKMeE7imw5M/2v7Vw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/27/2020

Application Dated: 12/27/2020
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01581  
CC MO 15C 2412.0  -  2472.0 0.06471  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application WVjAAhKMeE7imw5M/2v7Vw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 12/27/2020

Application Dated: 12/27/2020
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01581  
CC MO 15C 2412.0  -  2472.0 0.06471  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application B3upD7bV/5leEQBSEUCSfA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/27/2020

Application Dated: 12/27/2020
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.03524  
38 CC MO ND 15E 5260.0  -  5320.0 0.06776  
38 CC MO ND 15E 5500.0  -  5720.0 0.06152  
38 CC MO 15E 5745.0  -  5825.0 0.0618  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application B3upD7bV/5leEQBSEUCSfA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 12/27/2020

Application Dated: 12/27/2020
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA735M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.03524  
38 CC MO ND 15E 5260.0  -  5320.0 0.06776  
38 CC MO ND 15E 5500.0  -  5720.0 0.06152  
38 CC MO 15E 5745.0  -  5825.0 0.0618  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: