FCC ID A3LWCA736M

Wi-Fi/BT Transceiver

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: WCA736M
Latest application date: 2021-07-09

FCC ID Device Details

FCC IDA3LWCA736M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeWCA736M
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com
Equipment ClassWi-Fi/BT Transceiver
Test FirmONETECH Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-07-09
2402-2480 MHzOriginal Equipment2021-07-09
2402-2480 MHzOriginal Equipment2021-07-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-01-04PDF 653.1 KB
Internal PhotosInternal Photos2022-01-04PDF 226.6 KB
Internal photoInternal Photos2022-01-04PDF 226.6 KB
External PhotosExternal Photos2021-07-09PDF 363.6 KB
external photoExternal Photos2021-07-09PDF 363.6 KB
Labe LocationID Label/Location Info2021-07-09PDF 439.7 KB
LabelID Label/Location Info2021-07-09PDF 439.7 KB
Test Setup PhotosTest Setup Photos2022-01-04PDF 621.8 KB
Test setup photoTest Setup Photos2022-01-04PDF 621.8 KB
Test ReportTest Report2021-07-09PDF 3.4 MB
Test ReportTest Report2021-07-09PDF 4 MB
Test ReportTest Report2021-07-09PDF 5.2 MB
FCC Letter of Authorization Rev 2.0Cover Letter(s)2021-07-09PDF 70.2 KB
FCC Modular Approval Request Rev2.0Cover Letter(s)2021-07-09PDF 115.2 KB
FCC Short & Long Term Confidentiality Request Rev4Cover Letter(s)2021-07-09PDF 68.8 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2021-07-09PDF 62.8 KB
FCC_Short & Long Term Confidentiality Request[CCIC118Cover Letter(s)2021-07-09PDF 68.8 KB
Letter Authorization Rev 2.0Cover Letter(s)2021-07-09PDF 70.2 KB
RF EXPOSURERF Exposure Info2021-07-09PDF 506.1 KB
RF ExposureRF Exposure Info2021-07-09PDF 506.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 40 KB
SCH Metadata onlySchematicsPDF 299.8 KB
OP Metadata onlyOperational DescriptionPDF 387.7 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 157.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 194.9 KB

Application Information

Application IDc1i56oWmdzKsWERFhWrh6g==
Final Action Date2021-07-09
Application PurposeOriginal Equipment
Applicant FRN0005810205
ModelWCA736M
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWi-Fi/BT Transceiver
Responsible PartyJenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375
Technical ContactSamsung Electronics Co Ltd, j1.chun@samsung.com
Test FirmKi Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr , 82-31-799-9580
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/04/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
c1i56oWmdzKsWERFhWrh6g==2021-07-09Original Equipment
7HS+rE9g6mf8BkKrsP8PhQ==2021-07-09Original Equipment
0hoaj2WtV0rV9DRLdGVkiw==2021-07-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00615CCC
2402-2480 MHz0.015000015CCC
2412-2472 MHz0.04115CCC, MO
5180-5240 MHz0.02315E38, CC, MO
5260-5320 MHz0.05615E38, CC, MO, ND
5500-5720 MHz0.05315E38, CC, MO, ND
5745-5825 MHz0.06215E38, CC, MO

Grants

TCB Grant - Application c1i56oWmdzKsWERFhWrh6g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/09/2021

Application Dated: 07/09/2021
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.023  
38 CC MO ND 15E 5260.0  -  5320.0 0.056  
38 CC MO ND 15E 5500.0  -  5720.0 0.053  
38 CC MO 15E 5745.0  -  5825.0 0.062  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application c1i56oWmdzKsWERFhWrh6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 07/09/2021

Application Dated: 07/09/2021
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.023  
38 CC MO ND 15E 5260.0  -  5320.0 0.056  
38 CC MO ND 15E 5500.0  -  5720.0 0.053  
38 CC MO 15E 5745.0  -  5825.0 0.062  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 7HS+rE9g6mf8BkKrsP8PhQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/09/2021

Application Dated: 07/09/2021
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 7HS+rE9g6mf8BkKrsP8PhQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 07/09/2021

Application Dated: 07/09/2021
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.015  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0hoaj2WtV0rV9DRLdGVkiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/09/2021

Application Dated: 07/09/2021
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC MO 15C 2412.0  -  2472.0 0.041  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0hoaj2WtV0rV9DRLdGVkiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 07/09/2021

Application Dated: 07/09/2021
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCA736M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC MO 15C 2412.0  -  2472.0 0.041  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: