1. FCC ID
  2. A3L
  3. A3LWCF940M

FCC ID A3LWCF940M

Wi-Fi/BT Transceiver

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: WCF940M
Latest application date: 2025-03-06

FCC ID Device Details

FCC IDA3LWCF940M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeWCF940M
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com
Equipment ClassWi-Fi/BT Transceiver
Test FirmUL Verification Services (Guangzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-03-06
5955-7115 MHzClass II permissive change or modification of presently authorized equipment2025-03-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-03-06
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2025-03-06
5955-7115 MHzOriginal Equipment2025-01-29
5745-5825 MHzOriginal Equipment2025-01-29
2412-2472 MHzOriginal Equipment2025-01-29
2402-2480 MHzOriginal Equipment2025-01-29

Exhibits

DocumentTypeAvailableFile
FCC&IC WCF940M Users ManualUsers Manual2025-07-28PDF 378.9 KB
STC_EUTPhoto_InternalInternal Photos2025-09-02PDF 372.9 KB
EUTPhoto_InternalInternal Photos2025-07-28PDF 85.7 KB
STC_EUTPhoto_ExternalExternal Photos2025-09-02PDF 537.7 KB
EUTPhoto_ExternalExternal Photos2025-07-28PDF 486 KB
Label and label locationID Label/Location Info2025-01-29PDF 140.6 KB
STC_Setup PhotoTest Setup Photos2025-09-02PDF 769.5 KB
Setup PhotoTest Setup Photos2025-07-28PDF 936.8 KB
Setup Photo for Antenna appendix ATest Setup Photos2025-07-28PDF 170.4 KB
4791524970-RF-10 WIFI 5G FCC&ISED ReportTest Report2025-03-06PDF 2.8 MB
4791524970-RF-11 WIFI 6G FCC&ISED ReportTest Report2025-03-06PDF 3 MB
4791524970-RF-7 BLE FCC&ISED ReportTest Report2025-03-06PDF 1.3 MB
4791524970-RF-8 BT FCC&ISED ReportTest Report2025-03-06PDF 1.3 MB
4791524970-RF-9 WIFI 2.4G FCC&ISED ReportTest Report2025-03-06PDF 1.5 MB
4791524970-RF-1 BLE FCC&ISED ReportTest Report2025-01-29PDF 5.3 MB
4791524970-RF-2 BT FCC&ISED Report_Part1Test Report2025-01-29PDF 4.9 MB
4791524970-RF-2 BT FCC&ISED Report_Part2Test Report2025-01-29PDF 2.4 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part1Test Report2025-01-29PDF 5 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part2Test Report2025-01-29PDF 5 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part3Test Report2025-01-29PDF 4.8 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part4Test Report2025-01-29PDF 4.9 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part5Test Report2025-01-29PDF 5 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part6Test Report2025-01-29PDF 4.9 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part7Test Report2025-01-29PDF 5 MB
4791524970-RF-3 WIFI 2.4G FCC&ISED Report_Part8Test Report2025-01-29PDF 2.2 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part1Test Report2025-01-29PDF 5 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part10Test Report2025-01-29PDF 4.5 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part2Test Report2025-01-29PDF 5 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part3Test Report2025-01-29PDF 4.9 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part4Test Report2025-01-29PDF 4.9 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part5Test Report2025-01-29PDF 4.8 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part6Test Report2025-01-29PDF 5 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part7Test Report2025-01-29PDF 4.9 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part8Test Report2025-01-29PDF 4.9 MB
4791524970-RF-4 WIFI 5G FCC&ISED Report_Part9Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part1Test Report2025-01-29PDF 5 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part2Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part3Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part4Test Report2025-01-29PDF 5 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part5Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part6Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part7Test Report2025-01-29PDF 4.9 MB
4791524970-RF-5 WIFI 6G FCC&ISED Report_Part8Test Report2025-01-29PDF 4.3 MB
4791524970-RF-6 FCC MPE Report Metadata onlyTest Report2025-01-29PDF 217 KB
Antenna test reportTest Report2025-01-29PDF 1.4 MB
FCC 2.911[d][5] AttestationAttestation Statements2025-03-06PDF 66.3 KB
FCC Agent for service AttestationAttestation Statements2025-03-06PDF 18 KB
Attestation - Agent for service Attestation from Applicant-as-Agent [1]Attestation Statements2025-01-29PDF 18 KB
Attestation - FCC 2.911[d][5] Attestation Metadata onlyCover Letter(s)2025-01-29PDF 66.3 KB
Attestation - FCC 2.911[d][5] AttestationAttestation Statements2025-01-29PDF 66.3 KB
Declaration letter for 6XD Attestation letterCover Letter(s)2025-01-29PDF 22 KB
Declaration letter for Embedded AttestationCover Letter(s)2025-01-29PDF 22.9 KB
C2PC letter for FCC applicationCover Letter(s)2025-03-06PDF 351.4 KB
FCC Cofidentiality Request letterCover Letter(s)2025-03-06PDF 80 KB
FCC Confidentiality -short termCover Letter(s)2025-03-06PDF 110.7 KB
FCC agent auth letterCover Letter(s)2025-03-06PDF 98.6 KB
Agent auth letterCover Letter(s)2025-01-29PDF 98.6 KB
Confidentiality - permanentCover Letter(s)2025-01-29PDF 72.5 KB
Confidentiality - short termCover Letter(s)2025-01-29PDF 68.5 KB
Declaration Letter for Client devices without radar detection capabilityCover Letter(s)2025-01-29PDF 16.8 KB
Declaration Letter for Module approvalCover Letter(s)2025-01-29PDF 164.4 KB
4791524970-RF-6 FCC MPE ReportRF Exposure Info2025-03-06PDF 217 KB
Block diagram R1 Metadata onlyBlock DiagramPDF 243.9 KB
Circuit diagram Metadata onlySchematicsPDF 111 KB
WCF940M_PCB Layout Metadata onlySchematicsPDF 4.5 MB
confidential_WCF940M circuit diagram Metadata onlySchematicsPDF 152.3 KB
Operation description - FCC Software Security Requirements for UNII devices_Revi Metadata onlyOperational DescriptionPDF 157.8 KB
WCF940M Operation description.doc 1 Metadata onlyOperational DescriptionPDF 460.9 KB
WCF940M Turn-up procedure Metadata onlyOperational DescriptionPDF 145.5 KB
Bom list Metadata onlyParts List/Tune Up InfoPDF 313.1 KB
confidential_WCF940M_Bom List Metadata onlyParts List/Tune Up InfoPDF 306.8 KB

Application Information

Application IDSMXXIrVH7L9tc3CoPJK6ig==
Final Action Date2025-03-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0027908797
ModelWCF940M
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWi-Fi/BT Transceiver
Responsible PartyJenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375
Technical ContactShelley Chen, UL Verification Services Guangzhou Co., Ltd., SSL, shelley.chen@ul.com , 076933817168
Test FirmStephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com , 86-0769-33817120
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/02/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for modification to non-RF circuitry. Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
SMXXIrVH7L9tc3CoPJK6ig==2025-03-06Class II permissive change or modification of presently authorized equipment
QZJjjspNE9xZPcvt1FCM0Q==2025-03-06Class II permissive change or modification of presently authorized equipment
GYOqs9eIkKfgs8seuufi5A==2025-03-06Class II permissive change or modification of presently authorized equipment
/EXl91yMtk6lHnIIJ8z+WQ==2025-03-06Class II permissive change or modification of presently authorized equipment
plZTAIPzG4HGOGLREjQ6MQ==2025-01-29Original Equipment
oMlyxgsN+MRw1jDaRqs7/A==2025-01-29Original Equipment
PwwdvtqMFIw8bj6UjHAmfw==2025-01-29Original Equipment
N6rzpmajASnTYQspm54z2Q==2025-01-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0115CCC
2402-2480 MHz0.017000015CCC
2402-2480 MHz0.01CC
2402-2480 MHz0.0170000CC
2412-2472 MHz0.13915CCC, MO
2412-2472 MHz0.139CC, MO
5180-5240 MHz0.16615ECC, MO
5180-5240 MHz0.166CC, MO
5260-5320 MHz0.14415ECC, MO
5260-5320 MHz0.144CC, MO
5500-5720 MHz0.15115ECC, MO
5500-5720 MHz0.151CC, MO
5745-5825 MHz0.16415ECC, MO
5745-5825 MHz0.164CC, MO
5955-7115 MHz0.016000015ECC, EP, MO
5955-7115 MHz0.0160000CC, EP, MO

Grants

TCB Grant - Application SMXXIrVH7L9tc3CoPJK6ig==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/06/2025

Application Dated: 03/06/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.139  

Class II Permissive Change for modification to non-RF circuitry. Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QZJjjspNE9xZPcvt1FCM0Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/06/2025

Application Dated: 03/06/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.016  

Class II Permissive Change for modification to non-RF circuitry. Modular approval. Output power listed is EIRP. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PwwdvtqMFIw8bj6UjHAmfw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/29/2025

Application Dated: 01/27/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.139  

Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PwwdvtqMFIw8bj6UjHAmfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States 		  Date of Grant: 01/29/2025

Application Dated: 01/27/2025
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  
CC MO 15C 2412.0  -  2472.0 0.139  

Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application plZTAIPzG4HGOGLREjQ6MQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/29/2025

Application Dated: 01/27/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.016  

Modular approval. Output power listed is EIRP. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application plZTAIPzG4HGOGLREjQ6MQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States 		  Date of Grant: 01/29/2025

Application Dated: 01/27/2025
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC EP MO 15E 5955.0  -  7115.0 0.016  

Modular approval. Output power listed is EIRP. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application oMlyxgsN+MRw1jDaRqs7/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/29/2025

Application Dated: 01/27/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.166  
CC MO 15E 5260.0  -  5320.0 0.144  
CC MO 15E 5500.0  -  5720.0 0.151  
CC MO 15E 5745.0  -  5825.0 0.164  

Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application oMlyxgsN+MRw1jDaRqs7/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States 		  Date of Grant: 01/29/2025

Application Dated: 01/27/2025
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.166  
CC MO 15E 5260.0  -  5320.0 0.144  
CC MO 15E 5500.0  -  5720.0 0.151  
CC MO 15E 5745.0  -  5825.0 0.164  

Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application N6rzpmajASnTYQspm54z2Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 01/29/2025

Application Dated: 01/27/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.017  

Modular approval. Output power listed is conducted. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application N6rzpmajASnTYQspm54z2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States 		  Date of Grant: 01/29/2025

Application Dated: 01/27/2025
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi Fi BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.017  

Modular approval. Output power listed is conducted. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GYOqs9eIkKfgs8seuufi5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/06/2025

Application Dated: 03/06/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.017  

Class II Permissive Change for modification to non-RF circuitry. Modular approval. Output power listed is conducted. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /EXl91yMtk6lHnIIJ8z+WQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 03/06/2025

Application Dated: 03/06/2025
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWCF940M
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wi-Fi/BT Transceiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.166  
CC MO 15E 5260.0  -  5320.0 0.144  
CC MO 15E 5500.0  -  5720.0 0.151  
CC MO 15E 5745.0  -  5825.0 0.164  

Class II Permissive Change for modification to non-RF circuitry. Modular approval. Output power listed is conducted. This device supports 2x2 MIMO operation and 20MHz/40MHz/80MHz bandwidth. The module antennas must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.