FCC ID A3LWCP731M
Wi-Fi/BT Transceiver
by Samsung Electronics Co Ltd
Grantee Code: A3L Product Code: WCP731M
Latest application date: 2018-12-03
FCC ID Device Details
| FCC ID | A3LWCP731M |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A3L |
| Product Code | WCP731M |
| Applicant Business | Samsung Electronics Co Ltd 🇺🇸 |
| Related Domains |  samsung.com |
| Equipment Class | Wi-Fi/BT Transceiver |
| Test Firm | ONETECH Corp. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2018-12-03 |
| 2402-2480 MHz | Original Equipment | 2018-12-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users manual | Users Manual | 2019-06-01 | PDF 234.4 KB |
| Internal photo | Internal Photos | 2019-06-01 | PDF 931.2 KB |
| External photo | External Photos | 2019-06-01 | PDF 632.2 KB |
| Label | ID Label/Location Info | 2018-12-03 | PDF 212.7 KB |
| Test setup photo | Test Setup Photos | 2019-06-01 | PDF 709.1 KB |
| Test Report | Test Report | 2018-12-03 | PDF 5.2 MB |
| Test report 1 | Test Report | 2018-12-03 | PDF 5.1 MB |
| Test report 2 | Test Report | 2018-12-03 | PDF 4 MB |
| Test report 3 | Test Report | 2018-12-03 | PDF 5.5 MB |
| Test report BLE | Test Report | 2018-12-03 | PDF 3.1 MB |
| Authorization letter | Cover Letter(s) | 2018-12-03 | PDF 10.3 KB |
| Authorization letter | Cover Letter(s) | 2018-12-03 | PDF 24.7 KB |
| Confidentiality request letter | Cover Letter(s) | 2018-12-03 | PDF 24.7 KB |
| Modular compliance | Cover Letter(s) | 2018-12-03 | PDF 115.9 KB |
| Modular request | Cover Letter(s) | 2018-12-03 | PDF 115.9 KB |
| MPE report | RF Exposure Info | 2018-12-03 | PDF 334.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 52.1 KB | |
| Schematic Metadata only | Schematics | PDF 192.6 KB | |
| Schematics Metadata only | Schematics | PDF 192.6 KB | |
| Operation description Metadata only | Operational Description | PDF 270.7 KB | |
| Operational Description Metadata only | Operational Description | PDF 270.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 161.6 KB |
Application Information
| Application ID | Qr5GxGYMCQRRHrOZoNwifw== |
|---|---|
| Final Action Date | 2018-12-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0027908797 |
| Model | WCP731M |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi/BT Transceiver |
| Responsible Party | Jenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375 |
| Test Firm | Ki Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr  , 82-31-799-9580 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/01/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single modular approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Qr5GxGYMCQRRHrOZoNwifw== | 2018-12-03 | Original Equipment |
| PFOfykYMt0oyx+NEjAcshA== | 2018-12-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Qr5GxGYMCQRRHrOZoNwifw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/03/2018 Application Dated: 12/03/2018 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LWCP731M |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/BT Transceiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| 20 CC | 15C | 2412.0 - 2472.0 | 0.185 |
| Single modular approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Qr5GxGYMCQRRHrOZoNwifw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 12/03/2018 Application Dated: 12/03/2018 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LWCP731M |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/BT Transceiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| 20 CC | 15C | 2412.0 - 2472.0 | 0.185 |
| Single modular approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 12/03/2018 Application Dated: 12/03/2018 |
| Samsung Electronics Co Ltd |
| 19 Chapin Rd., Building D |
| Pine Brook, NJ 07058 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LWCP731M |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/BT Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Single modular approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PFOfykYMt0oyx+NEjAcshA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Samsung Electronics Co Ltd 19 Chapin Rd., Building D Pine Brook, NJ 07058 United States |
Date of Grant: 12/03/2018 Application Dated: 12/03/2018 |
| Attention: Jenni Chun , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A3LWCP731M |
| Name of Grantee: | Samsung Electronics Co Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/BT Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Single modular approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |