FCC ID A3LWEH720B

WiFi Transmitter

by Samsung Electronics Co Ltd

Grantee Code: A3L   Product Code: WEH720B
Latest application date: 2015-04-06

FCC ID Device Details

FCC IDA3LWEH720B
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA3L
Product CodeWEH720B
Applicant BusinessSamsung Electronics Co Ltd 🇺🇸
Related Domains samsung.com
Equipment ClassWiFi Transmitter
Test FirmDT&C; Co.,

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2015-04-06
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-04-06
2412-2462 MHzOriginal Equipment2015-01-27
5180-5240 MHzOriginal Equipment2015-01-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-07-26PDF 48.9 KB
Internal PhotosInternal Photos2015-07-26PDF 852.7 KB
External PhotosExternal Photos2015-07-26PDF 630.7 KB
ID LabelID Label/Location Info2015-01-27PDF 88.5 KB
Test Setup PhotosTest Setup Photos2015-10-03PDF 337.4 KB
Test Setup PhotosTest Setup Photos2015-07-26PDF 920.4 KB
RF Test Report(DTS)Test Report2015-04-06PDF 2.5 MB
RF Test Report(NII)Test Report2015-04-06PDF 2.2 MB
Test Report_DTS_part1Test Report2015-01-27PDF 4.4 MB
Test Report_DTS_part2Test Report2015-01-27PDF 4.3 MB
Test Report_NII_DFSTest Report2015-01-27PDF 2.3 MB
Test Report_NII_Part 1Test Report2015-01-27PDF 2.8 MB
Test Report_NII_Part 2Test Report2015-01-27PDF 3.2 MB
Authorization Letter for DTNCCover Letter(s)2015-04-06PDF 89.7 KB
Authorization Letter for FCC applicationCover Letter(s)2015-04-06PDF 288.1 KB
Confidentiality RequestCover Letter(s)2015-04-06PDF 25.8 KB
Request Letter for C2PCCover Letter(s)2015-04-06PDF 26 KB
Authorization LetterCover Letter(s)2015-01-27PDF 288 KB
Authorization Letter for DTNCCover Letter(s)2015-01-27PDF 90.7 KB
Confidentiality RequestCover Letter(s)2015-01-27PDF 25.9 KB
Modular ApprovalCover Letter(s)2015-01-27PDF 90.6 KB
MPERF Exposure Info2015-04-06PDF 27.8 KB
MPERF Exposure Info2015-01-27PDF 28.9 KB
Block Diagrams Metadata onlyBlock DiagramPDF 59.2 KB
Schematics Metadata onlySchematicsPDF 422.8 KB
Antenna Spec Metadata onlyOperational DescriptionPDF 331.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 397.3 KB
Operational Description_SSR Metadata onlyOperational DescriptionPDF 398.1 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 94.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 94.6 KB

Application Information

Application IDosrClrBYmJkidqpE+rnJWg==
Final Action Date2015-04-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0027908797
ModelWEH720B
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi Transmitter
Responsible PartyJenni Chun, General Manager, j1.chun@samsung.com , 973-808-6375
Test FirmChangho Lee, DT&C; Co.,, chlee@digitalemc.com , 82-31-321-2664
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/03/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change to enable the functions 802.11a/g with SISO & MIMO mode described in this filing. Modular approval. Output power listed is conducted. This device supports both 20 MHz and 40MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
osrClrBYmJkidqpE+rnJWg==2015-04-06Class II permissive change or modification of presently authorized equipment
hpg+JiVZBv9gAdrXL4vN7w==2015-04-06Class II permissive change or modification of presently authorized equipment
NNaJNfW1GAiMK3gv6nxEPg==2015-01-27Original Equipment
+dSn2icUM9FDNDvQcADyzg==2015-01-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.167000015CCC
2412-2462 MHz0.167000015CCC, MO
5180-5240 MHz0.02815E38, CC
5180-5240 MHz0.02815E38, CC, MO
5260-5320 MHz0.02715E38, CC
5260-5320 MHz0.02715E38, CC, MO
5500-5700 MHz0.02615E38, CC
5500-5700 MHz0.02615E38, CC, MO
5745-5825 MHz0.02515E38, CC
5745-5825 MHz0.02515E38, CC, MO

Grants

TCB Grant - Application osrClrBYmJkidqpE+rnJWg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/06/2015

Application Dated: 04/06/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.167  

Class II permissive change to enable the functions 802.11a/g with SISO & MIMO mode described in this filing.

Modular approval. Output power listed is conducted. This device supports both 20 MHz and 40MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application osrClrBYmJkidqpE+rnJWg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 04/06/2015

Application Dated: 04/06/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.167  

Class II permissive change to enable the functions 802.11a/g with SISO & MIMO mode described in this filing.

Modular approval. Output power listed is conducted. This device supports both 20 MHz and 40MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application NNaJNfW1GAiMK3gv6nxEPg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/27/2015

Application Dated: 01/27/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.167  

Modular approval. Output power listed is conducted. This device supports both 20 MHz and 40MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application NNaJNfW1GAiMK3gv6nxEPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 01/27/2015

Application Dated: 01/27/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Digital Transmission System
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.167  

Modular approval. Output power listed is conducted. This device supports both 20 MHz and 40MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application hpg+JiVZBv9gAdrXL4vN7w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/06/2015

Application Dated: 04/06/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO 15E 5260.0  -  5320.0 0.027  
38 CC MO 15E 5500.0  -  5700.0 0.026  
38 CC MO 15E 5745.0  -  5825.0 0.025  

Class II permissive change to enable the functions 802.11a/g with SISO & MIMO mode described in this filing.

Modular approval. Output power listed is conducted. This device supports both 20 MHz, 40MHz and 80MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application hpg+JiVZBv9gAdrXL4vN7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 04/06/2015

Application Dated: 04/06/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.028  
38 CC MO 15E 5260.0  -  5320.0 0.027  
38 CC MO 15E 5500.0  -  5700.0 0.026  
38 CC MO 15E 5745.0  -  5825.0 0.025  

Class II permissive change to enable the functions 802.11a/g with SISO & MIMO mode described in this filing.

Modular approval. Output power listed is conducted. This device supports both 20 MHz, 40MHz and 80MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi- transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application +dSn2icUM9FDNDvQcADyzg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 01/27/2015

Application Dated: 01/27/2015
Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.028  
38 CC 15E 5260.0  -  5320.0 0.027  
38 CC 15E 5500.0  -  5700.0 0.026  
38 CC 15E 5745.0  -  5825.0 0.025  

Modular approval. Output power listed is conducted. This device supports both 20 MHz, 40MHz and 80MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +dSn2icUM9FDNDvQcADyzg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Samsung Electronics Co Ltd
19 Chapin Rd., Building D
Pine Brook, NJ 07058
United States
  Date of Grant: 01/27/2015

Application Dated: 01/27/2015
 
Attention: Jenni Chun , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A3LWEH720B
Name of Grantee:  Samsung Electronics Co Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transmitter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.028  
38 CC 15E 5260.0  -  5320.0 0.027  
38 CC 15E 5500.0  -  5700.0 0.026  
38 CC 15E 5745.0  -  5825.0 0.025  

Modular approval. Output power listed is conducted. This device supports both 20 MHz, 40MHz and 80MHz bandwidths. This module may only be installed by the OEM or an OEM integrator. Only antenna(s) documented in this filings may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. OEM integrators, end-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: