FCC ID A5UXPWG3
WiFi Gen3 Module
by Whirlpool Corporation
Grantee Code: A5U Product Code: XPWG3
Latest application date: 2015-05-22
FCC ID Device Details
| FCC ID | A5UXPWG3 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A5U |
| Product Code | XPWG3 |
| Applicant Business | Whirlpool Corporation 🇺🇸 |
| Related Domains |  whirlpool.com |
| Equipment Class | WiFi Gen3 Module |
| Test Firm | DLS Electronic Systems, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-05-22 |
| 2412-2462 MHz | Original Equipment | 2015-03-27 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-05-22 | PDF 285.9 KB |
| User Manual | Users Manual | 2015-03-27 | PDF 288.3 KB |
| Internal Photos | Internal Photos | 2015-05-22 | PDF 751.3 KB |
| Internal Photos | Internal Photos | 2015-03-27 | PDF 505.7 KB |
| External Photos | External Photos | 2015-05-22 | PDF 751.3 KB |
| External Photos | External Photos | 2015-03-27 | PDF 505.7 KB |
| Label and Location | ID Label/Location Info | 2015-05-22 | PDF 2.6 MB |
| Test Report Setup Photos | Test Setup Photos | 2015-05-22 | PDF 1.1 MB |
| Test Setup Photos | Test Setup Photos | 2015-03-27 | PDF 630.1 KB |
| Test Report DTS 1 | Test Report | 2015-05-22 | PDF 5.6 MB |
| Test Report DTS 2 | Test Report | 2015-05-22 | PDF 5.6 MB |
| Test Report DTS 3 | Test Report | 2015-05-22 | PDF 4.2 MB |
| Test Report DTS 1 | Test Report | 2015-03-27 | PDF 3.9 MB |
| Test Report DTS 2 | Test Report | 2015-03-27 | PDF 5 MB |
| Confidentiality Letter | Cover Letter(s) | 2015-05-22 | PDF 44.1 KB |
| Cover letter | Cover Letter(s) | 2015-05-22 | PDF 148.4 KB |
| DTS Authorization Letter | Cover Letter(s) | 2015-05-22 | PDF 200.4 KB |
| Permissive Change Letter | Cover Letter(s) | 2015-05-22 | PDF 145.5 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-03-27 | PDF 44 KB |
| Cover Letters | Cover Letter(s) | 2015-03-27 | PDF 148.4 KB |
| Modular Approval Explanation Letter | Cover Letter(s) | 2015-03-27 | PDF 105.8 KB |
| Modular Approval Letter | Cover Letter(s) | 2015-03-27 | PDF 628.4 KB |
| RF Exposure MPE F Ant | RF Exposure Info | 2015-05-22 | PDF 195.1 KB |
| RF Exposure MPE PIFA Ant | RF Exposure Info | 2015-05-22 | PDF 195.1 KB |
| RF Exposure MPE | RF Exposure Info | 2015-03-27 | PDF 194.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 40.3 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 31.1 KB | |
| Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Description Metadata only | Operational Description | PDF 397.5 KB | |
| Description Metadata only | Operational Description | PDF 289.6 KB |
Application Information
| Application ID | P3neW8ldcNDXF9oyI8X5qw== |
|---|---|
| Final Action Date | 2015-05-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011042405 |
| Model | XPWG3 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Gen3 Module |
| Responsible Party | Jason W Schmidt, Director, Regulatory Affairs, jason_w_schmidt@whirlpool.com , 2699236071 |
| Technical Contact | William Stumpf, D.L.S. Dlectronic Systems, bstumpf@dlsemc.com  , 2622790210 |
| Test Firm | William Stumpf, DLS Electronic Systems, Inc., bstumpf@dlsemc.com , 262-279-0210 |
| TCB Email | Hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device may be used with this transmitter. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to add External Antennas. Also a request to include 2 additional configurations that depopulate components in the digital communication and power supply area. The radio transmitter and associated circuitry remains identical to the existing product. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| P3neW8ldcNDXF9oyI8X5qw== | 2015-05-22 | Class II permissive change or modification of presently authorized equipment |
| pgnhOy7ZSrMxHmKg1okaxA== | 2015-03-27 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.3220000 | 15C |
Grants
TCB Grant - Application pgnhOy7ZSrMxHmKg1okaxA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/27/2015 Application Dated: 03/27/2015 |
| Whirlpool Corporation |
| 2000 N M-63 |
| Mail Drop 3005 |
| Benton Harbor, MI 49022 |
| Attention: Jason Schmidt , Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A5UXPWG3 |
| Name of Grantee: | Whirlpool Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Gen3 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.322 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device may be used with this transmitter. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application pgnhOy7ZSrMxHmKg1okaxA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Whirlpool Corporation 2000 N M-63 Mail Drop 3005 Benton Harbor, MI 49022 United States |
Date of Grant: 03/27/2015 Application Dated: 03/27/2015 |
| Attention: Jason Schmidt , Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A5UXPWG3 |
| Name of Grantee: | Whirlpool Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Gen3 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.322 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device may be used with this transmitter. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 05/22/2015 Application Dated: 05/21/2015 |
| Whirlpool Corporation |
| 2000 N M-63 |
| Mail Drop 3005 |
| Benton Harbor, MI 49022 |
| Attention: Jason Schmidt , Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A5UXPWG3 |
| Name of Grantee: | Whirlpool Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Gen3 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.322 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device may be used with this transmitter. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to add External Antennas. Also a request to include 2 additional configurations that depopulate components in the digital communication and power supply area. The radio transmitter and associated circuitry remains identical to the existing product. |
EAS Grant - Application P3neW8ldcNDXF9oyI8X5qw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Whirlpool Corporation 2000 N M-63 Mail Drop 3005 Benton Harbor, MI 49022 United States |
Date of Grant: 05/22/2015 Application Dated: 05/21/2015 |
| Attention: Jason Schmidt , Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A5UXPWG3 |
| Name of Grantee: | Whirlpool Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Gen3 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.322 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only the antenna tested with the device may be used with this transmitter. The grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change to add External Antennas. Also a request to include 2 additional configurations that depopulate components in the digital communication and power supply area. The radio transmitter and associated circuitry remains identical to the existing product. |
| Mail To: |