FCC ID A6RBTA3X
Bluetooth Module
by Yamaha Corporation
Grantee Code: A6R Product Code: BTA3X
Latest application date: 2022-07-26
FCC ID Device Details
| FCC ID | A6RBTA3X |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A6R |
| Product Code | BTA3X |
| Applicant Business | Yamaha Corporation 🇯🇵 |
| Related Domains |  music.yamaha.com |
| Equipment Class | Bluetooth Module |
| Test Firm | SHENZHEN STS TEST SERVICES CO.,LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-07-26 |
| 2402-2480 MHz | Original Equipment | 2022-07-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-07-26 | PDF 1.3 MB |
| Int photos | Internal Photos | 2022-07-26 | PDF 213.6 KB |
| External Photos | External Photos | 2022-07-26 | PDF 305.4 KB |
| Label | ID Label/Location Info | 2022-07-26 | PDF 365.6 KB |
| Test setup Photos | Test Setup Photos | 2022-07-26 | PDF 589.5 KB |
| test report | Test Report | 2022-07-26 | PDF 4 MB |
| test report | Test Report | 2022-07-26 | PDF 5.3 MB |
| Agent Authorization | Cover Letter(s) | 2022-07-26 | PDF 26.6 KB |
| Authorization Letter | Cover Letter(s) | 2022-07-26 | PDF 102.1 KB |
| FCC Modular Approval Request Rev 3.0_rev.1 | Cover Letter(s) | 2022-07-26 | PDF 104.4 KB |
| FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 2022-07-26 | PDF 122.5 KB |
| RF Exposure | RF Exposure Info | 2022-07-26 | PDF 1.3 MB |
| Block Diagram Metadata only | Block Diagram | PDF 91.8 KB | |
| Schematic Metadata only | Schematics | PDF 73.1 KB | |
| Operation Description Metadata only | Operational Description | PDF 103.2 KB |
Application Information
| Application ID | gO04ar/nccIf6KmaFkmXWg== |
|---|---|
| Final Action Date | 2022-07-26 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023048820 |
| Model | BTA3X |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth Module |
| Responsible Party | Kenji Kawasaki, kenji.kawasaki@music.yamaha.com , +81-53-460-2376 |
| Technical Contact | YAMAHA CORPORATION, kenji.kawasaki@music.yamaha.com |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com  , +86 755-36886288 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gO04ar/nccIf6KmaFkmXWg== | 2022-07-26 | Original Equipment |
| Lr20dCu9xZzh41Dkhbzl8A== | 2022-07-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Lr20dCu9xZzh41Dkhbzl8A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 07/26/2022 Application Dated: 07/26/2022 |
| Yamaha Corporation |
| 10-1 Nakazawa-cho |
| Naka-ku |
| Hamamatsu 430-8650, Japan |
| Attention: Kenji Kawasaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A6RBTA3X |
| Name of Grantee: | Yamaha Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00345 |
| Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Lr20dCu9xZzh41Dkhbzl8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yamaha Corporation 10-1 Nakazawa-cho Naka-ku Hamamatsu 430-8650, Japan |
Date of Grant: 07/26/2022 Application Dated: 07/26/2022 |
| Attention: Kenji Kawasaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A6RBTA3X |
| Name of Grantee: | Yamaha Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00345 |
| Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 07/26/2022 Application Dated: 07/26/2022 |
| Yamaha Corporation |
| 10-1 Nakazawa-cho |
| Naka-ku |
| Hamamatsu 430-8650, Japan |
| Attention: Kenji Kawasaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A6RBTA3X |
| Name of Grantee: | Yamaha Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00287 |
| Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gO04ar/nccIf6KmaFkmXWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yamaha Corporation 10-1 Nakazawa-cho Naka-ku Hamamatsu 430-8650, Japan |
Date of Grant: 07/26/2022 Application Dated: 07/26/2022 |
| Attention: Kenji Kawasaki |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A6RBTA3X |
| Name of Grantee: | Yamaha Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00287 |
| Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |