FCC ID A8J-EOC655
Outdoor6 2x2 CPE
by EnGenius Technologies
Grantee Code: A8J Product Code: EOC655
Latest application date: 2024-07-23
FCC ID Device Details
| FCC ID | A8J-EOC655 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | A8J |
| Product Code | EOC655 |
| Applicant Business | EnGenius Technologies 🇺🇸 |
| Related Domains | |
| Equipment Class | Outdoor6 2x2 CPE |
| Test Firm | TUV Rheinland Taiwan Ltd. Taipei Testing Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-07-23 |
| 2402-2480 MHz | Original Equipment | 2024-02-19 |
| 5745-5825 MHz | Original Equipment | 2024-02-19 |
Exhibits
Application Information
| Application ID | l+kFpHY48IpxnbjC+pjPwQ== |
|---|---|
| Final Action Date | 2024-07-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021371836 |
| Model | EOC655 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Outdoor6 2x2 CPE |
| Responsible Party | Mingi Tsai, Senior Product Manager, mingi.tsai@engeniustech.com |
| Technical Contact | Mingi Tsai, EnGenius Technologies, mingi.tsai@engeniustech.com |
| Test Firm | Ivan Hsieh, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., IvanM.Hsieh@tuv.com |
| TCB Email | tcb-hotline@tuv.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/04/2024 |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to decrease the power level for U-NII-3 20/40MHz bandwidth modes. Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160MHz bandwidth modes. This device contains BLE and 2.4GHz WLAN transmitters. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| l+kFpHY48IpxnbjC+pjPwQ== | 2024-07-23 | Class II permissive change or modification of presently authorized equipment |
| o+/NcmKI6vCkY9WBGLeE3Q== | 2024-02-19 | Original Equipment |
| LBI+3+8p5loiqApk+2bUmg== | 2024-02-19 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application o+/NcmKI6vCkY9WBGLeE3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 02/19/2024 Application Dated: 02/08/2024 |
| EnGenius Technologies |
| 1580 Scenic Avenue, |
| Costa Mesa, CA 92626 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor6 2x2 CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.0204 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.9034 |
| Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40MHz bandwidth modes. This device contains a 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application o+/NcmKI6vCkY9WBGLeE3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, CA 92626 United States |
Date of Grant: 02/19/2024 Application Dated: 02/08/2024 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Digital Transmission System |
| Notes: | Outdoor6 2x2 CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2402.0 - 2480.0 | 0.0204 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.9034 |
| Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40MHz bandwidth modes. This device contains a 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 02/19/2024 Application Dated: 02/08/2024 |
| EnGenius Technologies |
| 1580 Scenic Avenue, |
| Costa Mesa, CA 92626 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor6 2x2 CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1238 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.0936 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0961 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3953 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.0671 |
| Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160MHz bandwidth modes. This device contains BLE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application LBI+3+8p5loiqApk+2bUmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, CA 92626 United States |
Date of Grant: 02/19/2024 Application Dated: 02/08/2024 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor6 2x2 CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1238 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.0936 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0961 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3953 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.0671 |
| Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160MHz bandwidth modes. This device contains BLE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 07/23/2024 Application Dated: 07/23/2024 |
| EnGenius Technologies |
| 1580 Scenic Avenue, |
| Costa Mesa, CA 92626 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor6 2x2 CPE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1238 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.0936 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0961 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3953 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.0671 |
| Class II Permissive Change to decrease the power level for U-NII-3 20/40MHz bandwidth modes. Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160MHz bandwidth modes. This device contains BLE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application l+kFpHY48IpxnbjC+pjPwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EnGenius Technologies 1580 Scenic Avenue, Costa Mesa, CA 92626 United States |
Date of Grant: 07/23/2024 Application Dated: 07/23/2024 |
| Attention: Mingi Tsai , Senior Product Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | A8J-EOC655 |
| Name of Grantee: | EnGenius Technologies |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Outdoor6 2x2 CPE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1238 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.0936 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.0961 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.3953 | ||
| CC MO | 15E | 5250.0 - 5250.0 | 0.0671 |
| Class II Permissive Change to decrease the power level for U-NII-3 20/40MHz bandwidth modes. Power output listed is conducted. This device must be professionally installed. This device is a 802.11 a/b/g/n/ac/ax outdoor access point device with 2x2 MIMO configuration. The antennas used for this transmitter must be fixed-mounted on outdoor permanent structures. The types of Dish and Panel antenna must be exclusively used for point-to-point operations. Only the antennas listed in this filing can be used. The antennas used for this transmitter must be installed to provide a separation distance of at least 250 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures. The installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80/160MHz bandwidth modes. This device contains BLE and 2.4GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |