FCC ID A8J-EWS357APV3

802.11AX Indoor Ceiling Mount Access Point

by EnGenius Technologies

Grantee Code: A8J   Product Code: EWS357APV3
Latest application date: 2022-07-27

FCC ID Device Details

FCC IDA8J-EWS357APV3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeA8J
Product CodeEWS357APV3
Applicant BusinessEnGenius Technologies 🇺🇸
Related Domains engeniustech.com
Equipment Class802.11AX Indoor Ceiling Mount Access Point
Test FirmTUV Rheinland Taiwan Ltd. Taipei Testing Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2022-07-27
2402-2480 MHzOriginal Equipment2020-06-17
5180-5240 MHzOriginal Equipment2020-06-17

Exhibits

DocumentTypeAvailableFile
Users manual revUsers Manual2020-06-17PDF 1.2 MB
Internal photosInternal Photos2020-06-17PDF 1.3 MB
External photosExternal Photos2020-06-17PDF 302.8 KB
Label sample and label locationID Label/Location Info2020-06-17PDF 925.6 KB
Test Setup PhotosTest Setup Photos2022-07-27PDF 2.6 MB
Test setup photosTest Setup Photos2020-06-17PDF 533 KB
CN22VSHI(P15E-WiFi) 001Test Report2022-07-27PDF 4.3 MB
CN22VSHI(P15E-WiFi) 001 Appendix A_for other configurationTest Report2022-07-27PDF 3.4 MB
CN22VSHI(P15E-WiFi) 001 Appendix B_PART1Test Report2022-07-27PDF 3.4 MB
CN22VSHI(P15E-WiFi) 001 Appendix B_PART2Test Report2022-07-27PDF 3.8 MB
CN22VSHI(P15E-WiFi) 001 Appendix C_PART1_for other configurationTest Report2022-07-27PDF 3.1 MB
CN22VSHI(P15E-WiFi) 001 Appendix C_PART2_for other configurationTest Report2022-07-27PDF 3.1 MB
CN22VSHI(P15E-WiFi) 001 Appendix C_PART3_for other configurationTest Report2022-07-27PDF 2.8 MB
CN22VSHI(P15E-WiFi) 001 Appendix C_PART4_for other configurationTest Report2022-07-27PDF 3.1 MB
CN22VSHI(P15E-WiFi) 001 Appendix D_PART1Test Report2022-07-27PDF 3.1 MB
CN22VSHI(P15E-WiFi) 001 Appendix D_PART2Test Report2022-07-27PDF 3.1 MB
CN22VSHI(P15E-WiFi) 001 Appendix D_PART3Test Report2022-07-27PDF 2.8 MB
CN22VSHI(P15E-WiFi) 001 Appendix D_PART4Test Report2022-07-27PDF 3.1 MB
Test Report(DTS-BT LE) rev2Test Report2020-06-17PDF 804.1 KB
Test Report(DTS-WLAN) rev2Test Report2020-06-17PDF 3 MB
Test Report(NII) rev2Test Report2020-06-17PDF 1.7 MB
Attestation (Channel and Mode Declaration)Attestation Statements2020-06-17PDF 158.8 KB
Agency LetterCover Letter(s)2022-07-27PDF 211.6 KB
C2PC LetterCover Letter(s)2022-07-27PDF 97.4 KB
Confidentiality LetterCover Letter(s)2022-07-27PDF 241.3 KB
Declaration of the Scanning RadioCover Letter(s)2022-07-27PDF 280.5 KB
Agent authorizationCover Letter(s)2020-06-17PDF 224.9 KB
Confidentiality requestCover Letter(s)2020-06-17PDF 237.4 KB
RF Exposure InfoRF Exposure Info2022-07-27PDF 1.1 MB
RF Exposure Info (MPE) revRF Exposure Info2020-06-17PDF 131.4 KB
Block diagram_rev Metadata onlyBlock DiagramPDF 45.2 KB
Schematics_rev Metadata onlySchematicsPDF 735.8 KB
Operational Description rev Metadata onlyOperational DescriptionPDF 201.6 KB
Operational Description_U-NII Device Software Security Description Metadata onlySDR Software/Security InfPDF 441.7 KB
Software Operational Description_rev2 Metadata onlyOperational DescriptionPDF 595.8 KB

Application Information

Application ID2O1IcsapzLUs0Ah3s6Fc9g==
Final Action Date2022-07-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021371836
ModelEWS357APV3
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description802.11AX Indoor Ceiling Mount Access Point
Responsible PartyMeng Chee Leo, General Manager, mc.leo@engeniustech.com , 888.735.7888
Technical ContactMeng Chee Leo, EnGenius Technologies, mc.leo@engeniustech.com , 888.735.7888
Test FirmWilly Chen, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., WillyL.Chen@tuv.com , +886-2-2172-7000
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing. Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

Applications

Application IDDatePurpose
2O1IcsapzLUs0Ah3s6Fc9g==2022-07-27Class II permissive change or modification of presently authorized equipment
nDa18wp1V54yXRh9AY64UQ==2020-06-17Original Equipment
YHFqHFOwjHlvmo5v9jV5Rg==2020-06-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00215CCC
2412-2462 MHz0.27615CCC, MO
5180-5240 MHz0.35315ECC, MO
5260-5320 MHz0.21515ECC, MO, ND
5500-5700 MHz0.21215ECC, MO, ND
5745-5825 MHz0.29215ECC, MO

Grants

TCB Grant - Application YHFqHFOwjHlvmo5v9jV5Rg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 06/17/2020

Application Dated: 06/17/2020
EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11AX Indoor Ceiling Mount Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.353  
CC MO 15E 5745.0  -  5825.0 0.292  

Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application YHFqHFOwjHlvmo5v9jV5Rg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
United States
  Date of Grant: 06/17/2020

Application Dated: 06/17/2020
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11AX Indoor Ceiling Mount Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.353  
CC MO 15E 5745.0  -  5825.0 0.292  

Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application nDa18wp1V54yXRh9AY64UQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 06/17/2020

Application Dated: 06/17/2020
EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Digital Transmission System
Notes: 802.11AX Indoor Ceiling Mount Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.276  
CC 15C 2402.0  -  2480.0 0.002  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application nDa18wp1V54yXRh9AY64UQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
United States
  Date of Grant: 06/17/2020

Application Dated: 06/17/2020
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Digital Transmission System
Notes: 802.11AX Indoor Ceiling Mount Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.276  
CC 15C 2402.0  -  2480.0 0.002  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2O1IcsapzLUs0Ah3s6Fc9g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 07/27/2022

Application Dated: 07/25/2022
EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11AX Indoor Ceiling Mount Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.353  
CC MO 15E 5745.0  -  5825.0 0.292  
CC MO ND 15E 5260.0  -  5320.0 0.215  
CC MO ND 15E 5500.0  -  5700.0 0.212  

Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing.

Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 2O1IcsapzLUs0Ah3s6Fc9g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EnGenius Technologies
1580 Scenic Avenue,
Costa Mesa, CA 92626
United States
  Date of Grant: 07/27/2022

Application Dated: 07/25/2022
 
Attention: Meng Chee Leo , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  A8J-EWS357APV3
Name of Grantee:  EnGenius Technologies
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11AX Indoor Ceiling Mount Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.353  
CC MO 15E 5745.0  -  5825.0 0.292  
CC MO ND 15E 5260.0  -  5320.0 0.215  
CC MO ND 15E 5500.0  -  5700.0 0.212  

Class II Permissive Change to add frequency bands 5.26-5.32GHz and 5.50-5.70GHz via software enabling as described in this filing.

Power listed is maximum combined conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: