FCC ID AB6NT1900MFRM2
CDMA Cellular Base Station
by Avaya Canada Corporation
Grantee Code: AB6 Product Code: NT1900MFRM2
Latest application date: 2004-01-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 1930-1990 MHz | Class II permissive change or modification of presently authorized equipment | 2004-01-12 |
| 1930-1990 MHz | Original Equipment | 2003-04-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2003-04-01 | PDF 387.9 KB |
| Label Revised | ID Label/Location Info | 2003-04-01 | PDF 107.2 KB |
| Test Photos | Test Setup Photos | 2004-01-12 | PDF 327.7 KB |
| Test Photographs | Test Setup Photos | 2003-04-01 | PDF 311.8 KB |
| Test Report From Nortel | Test Report | 2004-01-12 | PDF 1.1 MB |
| Test Report From Solectron | Test Report | 2004-01-12 | PDF 901.3 KB |
| Test Report Summary | Test Report | 2004-01-12 | PDF 179 KB |
| Antenna Conducted Test Report | Test Report | 2003-04-01 | PDF 544.8 KB |
| CMAC Test Report Revised | Test Report | 2003-04-01 | PDF 1.2 MB |
| Test Summary Revised | Test Report | 2003-04-01 | PDF 237.8 KB |
| Confidentiality Request | Cover Letter(s) | 2004-01-12 | PDF 94.2 KB |
| Copy of Original Grant | Cover Letter(s) | 2004-01-12 | PDF 110.7 KB |
| Letter of Changes | Cover Letter(s) | 2004-01-12 | PDF 94.9 KB |
| Comments | Cover Letter(s) | 2003-04-01 | PDF 40.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2003-04-01 | PDF 116.5 KB |
| Response | Cover Letter(s) | 2003-04-01 | PDF 129.8 KB |
| RF Exposure Information | RF Exposure Info | 2003-04-01 | PDF 319.7 KB |
| Schematic Part B Resent Metadata only | Users Manual | PDF 3.8 MB | |
| Users Manual Metadata only | Users Manual | PDF 812.2 KB | |
| Users Manual Metadata only | Users Manual | PDF 769.4 KB | |
| Internal Photographs Metadata only | Internal Photos | PDF 1.3 MB | |
| Revised Internal Photographs Metadata only | Internal Photos | PDF 1.3 MB | |
| Schematics Part A Metadata only | Schematics | PDF 3.3 MB | |
| Schematics Part A Metadata only | Schematics | PDF 3.2 MB | |
| Schematics Part B Metadata only | Schematics | PDF 3.8 MB | |
| Schematics Part B Resent Metadata only | Schematics | PDF 3.8 MB | |
| Schematics Part C Metadata only | Schematics | PDF 3.3 MB | |
| Schematics Part C Metadata only | Schematics | PDF 3.3 MB | |
| Schematics Part D Metadata only | Schematics | PDF 1.9 MB | |
| Schematics Part D Metadata only | Schematics | PDF 1.8 MB | |
| Technical Description Metadata only | Operational Description | PDF 252.6 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 164.9 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 182.5 KB |
Application Information
| Application ID | 6/LpdWjap6BJH3ReF6k+xA== |
|---|---|
| Final Action Date | 2004-01-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019601368 |
| Model | NT1900MFRM2 |
| Frequency Range | 1930-1990 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | CDMA Cellular Base Station |
| Responsible Party | Ian Hawes, Regulatory Prime, ianhawes@avaya.com |
| Technical Contact | Thomas Wong, Nortel Networks Inc., thomaswg@nortelnetworks.com |
| Non-Technical Contact | Thomas Wong, Nortel Networks Inc., thomaswg@nortelnetworks.com |
| TCB Email | hotline@AmericanTCB.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The F9W emission designator is for IS-95 or IS-2000 carriers and D9W emission designator is for IS-856 carriers. Individual IS-856 carriers must be reduced by 1.5 dB from the full rated value per carrier of the radio as given within this application. Maximum composite output power using 3-carriers with different baseband modulations and one IS-856 carrier is 39.7 Watts. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 6/LpdWjap6BJH3ReF6k+xA== | 2004-01-12 | Class II permissive change or modification of presently authorized equipment |
| HdehPAOtGjIWmhjM5iML0g== | 2003-04-01 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 1930-1990 MHz | 41.4 | 0.015ppm | 1M25F9W | 24E | BC |
| 1930-1990 MHz | 41.4 | 0.015ppm | 1M25F9W | 24E | |
| 1930-1990 MHz | 41.4 | 0.015ppm | 2M50F9W | 24E | BC |
| 1930-1990 MHz | 41.4 | 0.015ppm | 2M50F9W | 24E | |
| 1930-1990 MHz | 41.4 | 0.015ppm | 3M75F9W | 24E | BC |
| 1930-1990 MHz | 41.4 | 0.015ppm | 3M75F9W | 24E | |
| 1930-1990 MHz | 33.4 | 0.015ppm | 1M25D9W | 24E | BC |
| 1930-1990 MHz | 33.4 | 0.015ppm | 2M50D9W | 24E | BC |
| 1930-1990 MHz | 33.4 | 0.015ppm | 3M75D9W | 24E | BC |
Grants
TCB Grant - Application HdehPAOtGjIWmhjM5iML0g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/01/2003 Application Dated: 04/01/2003 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NT1900MFRM2 |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA Cellular Base Station |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 1M25F9W | |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 2M50F9W | |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 3M75F9W |
| Power Output shown is conducted composite of all channels. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application HdehPAOtGjIWmhjM5iML0g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 04/01/2003 Application Dated: 04/01/2003 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NT1900MFRM2 |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA Cellular Base Station |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 1M25F9W | |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 2M50F9W | |
| 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 3M75F9W |
| Power Output shown is conducted composite of all channels. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/12/2004 Application Dated: 01/12/2004 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NT1900MFRM2 |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA Cellular Base Station |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 1M25F9W |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 2M50F9W |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 3M75F9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 1M25D9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 2M50D9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 3M75D9W |
| Power output listed is conducted. The F9W emission designator is for IS-95 or IS-2000 carriers and D9W emission designator is for IS-856 carriers. Individual IS-856 carriers must be reduced by 1.5 dB from the full rated value per carrier of the radio as given within this application. Maximum composite output power using 3-carriers with different baseband modulations and one IS-856 carrier is 39.7 Watts. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application 6/LpdWjap6BJH3ReF6k+xA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 01/12/2004 Application Dated: 01/12/2004 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NT1900MFRM2 |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | CDMA Cellular Base Station |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 1M25F9W |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 2M50F9W |
| BC | 24E | 1930.0 - 1990.0 | 41.4 | 0.015 PM | 3M75F9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 1M25D9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 2M50D9W |
| BC | 24E | 1930.0 - 1990.0 | 33.4 | 0.015 PM | 3M75D9W |
| Power output listed is conducted. The F9W emission designator is for IS-95 or IS-2000 carriers and D9W emission designator is for IS-856 carriers. Individual IS-856 carriers must be reduced by 1.5 dB from the full rated value per carrier of the radio as given within this application. Maximum composite output power using 3-carriers with different baseband modulations and one IS-856 carrier is 39.7 Watts. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: |