FCC ID AB6NTE301AA
Wireless Access Point
by Avaya Canada Corporation
Grantee Code: AB6 Product Code: NTE301AA
Latest application date: 2004-05-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-05-21 |
| 2412-2462 MHz | Original Equipment | 2004-03-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Installation Guide Intro | Users Manual | 2004-03-31 | PDF 225.1 KB |
| Internal Photo of Primary Side | Internal Photos | 2004-05-21 | PDF 89 KB |
| Internal Photo of Secondry Side | Internal Photos | 2004-05-21 | PDF 103.1 KB |
| Internal Picture NTE324AB | Internal Photos | 2004-05-21 | PDF 21 KB |
| Back of Access Radio | Internal Photos | 2004-03-31 | PDF 1.8 MB |
| Back of Backhaul Radio Card | Internal Photos | 2004-03-31 | PDF 1.6 MB |
| Back of Backhaul Radio Strip Filter | Internal Photos | 2004-03-31 | PDF 2.6 MB |
| Backhaul Radio Card Back2 | Internal Photos | 2004-03-31 | PDF 1.9 MB |
| Backhaul Radio Strip Cans Removed | Internal Photos | 2004-03-31 | PDF 28.4 KB |
| Backhaul Radio Strip Filter | Internal Photos | 2004-03-31 | PDF 214.2 KB |
| Front of Motherboard | Internal Photos | 2004-03-31 | PDF 233.5 KB |
| Internal Photos Generic | Internal Photos | 2004-03-31 | PDF 1.3 MB |
| Switch Matrix | Internal Photos | 2004-03-31 | PDF 71.2 KB |
| Top of Access Radio | Internal Photos | 2004-03-31 | PDF 2.1 MB |
| Top of Backhaul Radio Card | Internal Photos | 2004-03-31 | PDF 2.5 MB |
| External Photos | External Photos | 2004-03-31 | PDF 199.1 KB |
| Label Location | ID Label/Location Info | 2004-03-31 | PDF 176.5 KB |
| Label material | ID Label/Location Info | 2004-03-31 | PDF 36 KB |
| Test Setup Photos | Test Setup Photos | 2004-05-21 | PDF 186.3 KB |
| Test Setup Photos | Test Setup Photos | 2004-03-31 | PDF 439.1 KB |
| Test Report | Test Report | 2004-05-21 | PDF 2 MB |
| Test Report | Test Report | 2004-03-31 | PDF 2.5 MB |
| Class II PC Letter Modifications | Cover Letter(s) | 2004-05-21 | PDF 29.6 KB |
| Confidentiality Request | Cover Letter(s) | 2004-05-21 | PDF 31.6 KB |
| Response to TCB Findings | Cover Letter(s) | 2004-05-21 | PDF 67.6 KB |
| Confidentiality Request | Cover Letter(s) | 2004-03-31 | PDF 32.8 KB |
| Response to TCB Findings | Cover Letter(s) | 2004-03-31 | PDF 55.6 KB |
| RF Exposure Info MPE Prediction 10dbi integral | RF Exposure Info | 2004-03-31 | PDF 75 KB |
| RF Exposure Info MPE Prediction 13dbi | RF Exposure Info | 2004-03-31 | PDF 75.1 KB |
| RF Exposure Info MPE Prediction 18dbi | RF Exposure Info | 2004-03-31 | PDF 75.1 KB |
| RF Exposure Info MPE Prediction 23 6dbi 30cm | RF Exposure Info | 2004-03-31 | PDF 75.1 KB |
| RF Exposure Info MPE Prediction PIFA 0dBi integral | RF Exposure Info | 2004-03-31 | PDF 75.4 KB |
| RF Exposure Info MPE Prediction Whip 30cm | RF Exposure Info | 2004-03-31 | PDF 75.1 KB |
| RF Exposure Info MPE Prediction Whip 5dBi | RF Exposure Info | 2004-03-31 | PDF 75.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 59.9 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 22.2 KB | |
| PCB Layout NTE311AB Metadata only | Schematics | PDF 452.4 KB | |
| Schematic 11a miniPCI R0A R01 Metadata only | Schematics | PDF 123.6 KB | |
| Schematic R101 Final Metadata only | Schematics | PDF 215.3 KB | |
| Schematics Metadata only | Schematics | PDF 2.2 MB | |
| Schematics 0220 11bg Metadata only | Schematics | PDF 127.5 KB | |
| Operational Description Metadata only | Operational Description | PDF 424.9 KB | |
| Bill of Materials Metadata only | Parts List/Tune Up Info | PDF 388.9 KB | |
| Bill of Materials NTE311AB Metadata only | Parts List/Tune Up Info | PDF 20.2 KB | |
| Bill of Materials NTE324AB Metadata only | Parts List/Tune Up Info | PDF 3.1 KB |
Application Information
| Application ID | V6RbpTF1FjJyyrv/3ZyUrQ== |
|---|---|
| Final Action Date | 2004-05-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019601368 |
| Model | NTE301AA |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Access Point |
| Responsible Party | Ian Hawes, Regulatory Prime, ianhawes@avaya.com  , 613-967-5545 |
| Test Firm | Charles Neal, Nemko Canada Inc. (Ottawa), charles.neal@nemko.com  , 613-737-9680 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Grant Conditions – Power outputs listed are conducted. This device requires professional installation. Only the antennas listed in this filing can be used with this device. Indoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Outdoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Point to point operation is restricted to outdoor installations only. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| V6RbpTF1FjJyyrv/3ZyUrQ== | 2004-05-21 | Class II permissive change or modification of presently authorized equipment |
| js2mUGwnKZCv/rarNVxX5A== | 2004-03-31 | Original Equipment |
Grants
TCB Grant - Application V6RbpTF1FjJyyrv/3ZyUrQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 05/21/2004 Application Dated: 05/21/2004 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NTE301AA |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.12 | ||
| CE | 15C | 5740.0 - 5840.0 | 0.1 |
| Grant Conditions – Power outputs listed are conducted. This device requires professional installation. Only the antennas listed in this filing can be used with this device. Indoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Outdoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Point to point operation is restricted to outdoor installations only. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application V6RbpTF1FjJyyrv/3ZyUrQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 05/21/2004 Application Dated: 05/21/2004 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NTE301AA |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.12 | ||
| CE | 15C | 5740.0 - 5840.0 | 0.1 |
| Grant Conditions – Power outputs listed are conducted. This device requires professional installation. Only the antennas listed in this filing can be used with this device. Indoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Outdoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this filing. Point to point operation is restricted to outdoor installations only. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 03/31/2004 Application Dated: 03/31/2004 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NTE301AA |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.12 | ||
| CE | 15C | 5740.0 - 5840.0 | 0.1 |
| Grant Conditions – Power outputs listed are conducted. This device requires professional installation. Only the antennas listed in this filing can be used with this device. Indoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Outdoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Point to point operation is restricted to outdoor installations only. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application js2mUGwnKZCv/rarNVxX5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 03/31/2004 Application Dated: 03/31/2004 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6NTE301AA |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.12 | ||
| CE | 15C | 5740.0 - 5840.0 | 0.1 |
| Grant Conditions – Power outputs listed are conducted. This device requires professional installation. Only the antennas listed in this filing can be used with this device. Indoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Outdoor Installation – The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter not described in this application. Point to point operation is restricted to outdoor installations only. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |