FCC ID AB6S8000BTS
Base Transceiver Station
by Avaya Canada Corporation
Grantee Code: AB6 Product Code: S8000BTS
Latest application date: 2008-06-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 869.2-893.8 MHz | Class II permissive change or modification of presently authorized equipment | 2008-06-12 |
| 869.2-893.8 MHz | Original Equipment | 2006-02-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2008-06-12 | PDF 226.2 KB |
| Exhibit 3 external photos | External Photos | 2006-02-03 | PDF 1.4 MB |
| Exhibit 1 Label | ID Label/Location Info | 2006-02-03 | PDF 941.2 KB |
| Test Report | Test Report | 2008-06-12 | PDF 503.3 KB |
| Exhibit 6 Test report 1 | Test Report | 2006-02-03 | PDF 2.5 MB |
| Exhibit 6 Test report 2 | Test Report | 2006-02-03 | PDF 305.2 KB |
| Exhibit 6 Test report 3 | Test Report | 2006-02-03 | PDF 3.6 MB |
| Agency | Cover Letter(s) | 2008-06-12 | PDF 27.3 KB |
| Cover Letter Class II Permissive Change | Cover Letter(s) | 2008-06-12 | PDF 162.6 KB |
| Exhibit 13 Cover letter | Cover Letter(s) | 2006-02-03 | PDF 91.4 KB |
| Exhibit 2 Request for confidentiality | Cover Letter(s) | 2006-02-03 | PDF 88.8 KB |
| Exhibit 11 Health declaration | RF Exposure Info | 2006-02-03 | PDF 130.5 KB |
| Exhibit 8 User Manual 1 Metadata only | Users Manual | PDF 2.6 MB | |
| Exhibit 8 User Manual 2 Metadata only | Users Manual | PDF 2.8 MB | |
| Exhibit 8 User Manual 3 Metadata only | Users Manual | PDF 2 MB | |
| Exhibit 9 Internal photos Metadata only | Internal Photos | PDF 2.7 MB | |
| Exhibit 4 Block diagram Metadata only | Block Diagram | PDF 1.4 MB | |
| Exhibit 5 schematics 1 Metadata only | Schematics | PDF 2 MB | |
| Exhibit 5 schematics 2 Metadata only | Schematics | PDF 2.7 MB | |
| Exhibit 5 schematics 3 Metadata only | Schematics | PDF 3.2 MB | |
| Exhibit 5 schematics 4 Metadata only | Schematics | PDF 2.3 MB | |
| Exhibit 12 Operational Description 3 Metadata only | Operational Description | PDF 2 MB | |
| Exhibit 12 Operational description 1 Metadata only | Operational Description | PDF 2.6 MB | |
| Exhibit 12 Operational description2 Metadata only | Operational Description | PDF 2.8 MB | |
| Exhibit 10 Part list Metadata only | Parts List/Tune Up Info | PDF 210.4 KB |
Application Information
| Application ID | 9EdRpsv9KUmUTHid7X6iAw== |
|---|---|
| Final Action Date | 2008-06-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019601368 |
| Model | S8000BTS |
| Frequency Range | 869.2-893.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Base Transceiver Station |
| Responsible Party | Ian Hawes, Regulatory Prime, ianhawes@avaya.com  , 613-967-5545 |
| Test Firm | Yannick Savoie, LCIE Etablissement Sud-Est, yannick.savoie@lcie.fr  , 00-33-4-76-07-36-36 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change to add a new version of an existing power amplifier as detailed in this filing. The equipment can be configured in the PCS1900 and GSM850 bandwitdh, respectively with the following power amplifiers : HePA PCS1900 (Hardware Code NTQA50RA), PA PCS1900 (Hardware Code: NTQA50DB, NTQA50GA), HePA GSM850(Hardware Code NTQA50UA), PA GSM850 (Hardware code NTQA37AA) and with coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H : The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following configurations : Configurations in GMSK Modulation: HePA module (Hardware Code NTQA50UA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation: HePA module (Hardware Code NTQA50UA) 4dB power reduction [Diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are: Configurations in GMSK Modulation : HePA module (Hardware Code NTQA50RA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA50DB, NTQA50GA) 4dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation : HePA module (Hardware Code NTQA50RA) 2dB power reduction [Diplexer configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9EdRpsv9KUmUTHid7X6iAw== | 2008-06-12 | Class II permissive change or modification of presently authorized equipment |
| HkWmDdjQAWG6XqQI3dc4Bw== | 2006-02-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application HkWmDdjQAWG6XqQI3dc4Bw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 02/03/2006 Application Dated: 02/03/2006 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6S8000BTS |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Base Transceiver Station |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.2 - 1989.8 | 45.71 | 90.0 Hz | 300KGXW | |
| 24E | 1930.2 - 1989.8 | 38.02 | 90.0 Hz | 300KG7W | |
| 22H | 869.2 - 893.8 | 42.66 | 45.0 Hz | 300KGXW | |
| 22H | 869.2 - 893.8 | 38.9 | 45.0 Hz | 300KG7W |
| The equipment can be configured in the PCS1900 and GSM850 bandwitdh, respectively with the following power amplifiers : HePA PCS1900 (Hardware Code NTQA50RA), PA PCS1900 (Hardware Code: NTQA50DB, NTQA50GA), HePA GSM850(Hardware Code NTQA50UA), PA GSM850 (Hardware code NTQA37AA) and with coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H : The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following configurations : Configurations in GMSK Modulation: HePA module (Hardware Code NTQA50UA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation: HePA module (Hardware Code NTQA50UA) 4dB power reduction [Diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are: Configurations in GMSK Modulation : HePA module (Hardware Code NTQA50RA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA50DB, NTQA50GA) 4dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation : HePA module (Hardware Code NTQA50RA) 2dB power reduction [Diplexer configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application HkWmDdjQAWG6XqQI3dc4Bw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 02/03/2006 Application Dated: 02/03/2006 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6S8000BTS |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Base Transceiver Station |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1930.2 - 1989.8 | 45.71 | 90.0 Hz | 300KGXW | |
| 24E | 1930.2 - 1989.8 | 38.02 | 90.0 Hz | 300KG7W | |
| 22H | 869.2 - 893.8 | 42.66 | 45.0 Hz | 300KGXW | |
| 22H | 869.2 - 893.8 | 38.9 | 45.0 Hz | 300KG7W |
| The equipment can be configured in the PCS1900 and GSM850 bandwitdh, respectively with the following power amplifiers : HePA PCS1900 (Hardware Code NTQA50RA), PA PCS1900 (Hardware Code: NTQA50DB, NTQA50GA), HePA GSM850(Hardware Code NTQA50UA), PA GSM850 (Hardware code NTQA37AA) and with coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H : The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following configurations : Configurations in GMSK Modulation: HePA module (Hardware Code NTQA50UA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation: HePA module (Hardware Code NTQA50UA) 4dB power reduction [Diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are: Configurations in GMSK Modulation : HePA module (Hardware Code NTQA50RA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA50DB, NTQA50GA) 4dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation : HePA module (Hardware Code NTQA50RA) 2dB power reduction [Diplexer configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/12/2008 Application Dated: 06/12/2008 |
| Avaya Canada Corporation |
| 250 Sidney Street |
| Belleville, Ontario, K0K2C0 Canada |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6S8000BTS |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Base Transceiver Station |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 869.2 - 893.8 | 42.66 | 45.0 Hz | 300KGXW | |
| 22H | 869.2 - 893.8 | 38.9 | 45.0 Hz | 300KG7W | |
| 24E | 1930.2 - 1989.8 | 45.71 | 90.0 Hz | 300KGXW | |
| 24E | 1930.2 - 1989.8 | 38.02 | 90.0 Hz | 300KG7W |
| Class II permissive change to add a new version of an existing power amplifier as detailed in this filing. The equipment can be configured in the PCS1900 and GSM850 bandwitdh, respectively with the following power amplifiers : HePA PCS1900 (Hardware Code NTQA50RA), PA PCS1900 (Hardware Code: NTQA50DB, NTQA50GA), HePA GSM850(Hardware Code NTQA50UA), PA GSM850 (Hardware code NTQA37AA) and with coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H : The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following configurations : Configurations in GMSK Modulation: HePA module (Hardware Code NTQA50UA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation: HePA module (Hardware Code NTQA50UA) 4dB power reduction [Diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are: Configurations in GMSK Modulation : HePA module (Hardware Code NTQA50RA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA50DB, NTQA50GA) 4dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation : HePA module (Hardware Code NTQA50RA) 2dB power reduction [Diplexer configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
EAS Grant - Application 9EdRpsv9KUmUTHid7X6iAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Avaya Canada Corporation 250 Sidney Street Belleville, Ontario, K0K2C0 Canada |
Date of Grant: 06/12/2008 Application Dated: 06/12/2008 |
| Attention: Ian Hawes , Regulatory Prime |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | AB6S8000BTS |
| Name of Grantee: | Avaya Canada Corporation |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Base Transceiver Station |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 869.2 - 893.8 | 42.66 | 45.0 Hz | 300KGXW | |
| 22H | 869.2 - 893.8 | 38.9 | 45.0 Hz | 300KG7W | |
| 24E | 1930.2 - 1989.8 | 45.71 | 90.0 Hz | 300KGXW | |
| 24E | 1930.2 - 1989.8 | 38.02 | 90.0 Hz | 300KG7W |
| Class II permissive change to add a new version of an existing power amplifier as detailed in this filing. The equipment can be configured in the PCS1900 and GSM850 bandwitdh, respectively with the following power amplifiers : HePA PCS1900 (Hardware Code NTQA50RA), PA PCS1900 (Hardware Code: NTQA50DB, NTQA50GA), HePA GSM850(Hardware Code NTQA50UA), PA GSM850 (Hardware code NTQA37AA) and with coupling devices Diplexer, Hybrid H2D Diplexer, Hybrid H4D Diplexer in both GMSK and 8PSK modulation techniques. To comply with the FCC spurious emissions requirements, all configurations must be configured with the following restrictions. FCC Rule Part 22 Subpart H : The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values are required for edge channels [ARFCN 128, 131, 133, 181, 183, 231, 233, 251] for the following configurations : Configurations in GMSK Modulation: HePA module (Hardware Code NTQA50UA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation: HePA module (Hardware Code NTQA50UA) 4dB power reduction [Diplexer configuration]. PA module (Hardware Code NTQA37AA) 2dB power reduction [Diplexer configuration]. FCC Rule Part 24 Subpart E. The maximum output power in a channel adjacent to any frequency block edge must be reduced as specified in the filing. The power reduction values for the configurations are: Configurations in GMSK Modulation : HePA module (Hardware Code NTQA50RA), 6dB power reduction [Diplexer configuration], 2dB power reduction [Hybrid H2D diplexer configuration]. PA module (Hardware Code NTQA50DB, NTQA50GA) 4dB power reduction [Diplexer configuration]. Configurations in 8PSK Modulation : HePA module (Hardware Code NTQA50RA) 2dB power reduction [Diplexer configuration]. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of §1.1307(b)(3). |
| Mail To: |