FCC ID ABZ89FC3789

Canopy 5200G series

by Motorola Solutions, Inc.

Grantee Code: ABZ   Product Code: 89FC3789
Latest application date: 2009-11-10

FCC ID Device Details

FCC IDABZ89FC3789
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeABZ
Product Code89FC3789
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassCanopy 5200G series
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5275-5325 MHzClass II permissive change or modification of presently authorized equipment2009-11-10
5275-5325 MHzClass II permissive change or modification of presently authorized equipment2007-07-27
5275-5325 MHzClass II permissive change or modification of presently authorized equipment2007-07-20
5275-5325 MHzClass II permissive change or modification of presently authorized equipment2005-07-05
5275-5325 MHzOriginal Equipment2001-09-07

Exhibits

DocumentTypeAvailableFile
Exhibit D Users Manual per 2 1033 b3Users Manual2001-09-07PDF 1.9 MB
Exhibit C Internal Photographs per 2 1033 b7Internal Photos2001-09-07PDF 201.5 KB
PhotoExternal Photos2009-11-10PDF 74 KB
Exhibit C External Photographs per 2 1033 b7External Photos2001-09-07PDF 489 KB
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info2001-09-07PDF 2.7 KB
Exhibit C Test Setup photographsTest Setup Photos2001-09-07PDF 370.5 KB
DFS ReportTest Report2009-11-10PDF 1.1 MB
Dish and Lens reportTest Report2009-11-10PDF 507.2 KB
RF test reportTest Report2009-11-10PDF 1.5 MB
R66913Test Report2007-07-27PDF 1.1 MB
Test ReportTest Report2007-07-20PDF 588.5 KB
Conducted Emissions Test ReportTest Report2005-07-05PDF 1.7 MB
Exhibit E Test Measurement Report per 2 1033 b6 TEST REPORT PART 1Test Report2001-09-07PDF 1.7 MB
Exhibit E Test Measurement Report per 2 1033 b6 TEST REPORT PART 2Test Report2001-09-07PDF 2 MB
Class II Permissive ChangeCover Letter(s)2009-11-10PDF 7.3 KB
request for confidentialityCover Letter(s)2009-11-10PDF 20.1 KB
signed cover letterCover Letter(s)2009-11-10PDF 18.8 KB
Agent Authorization letterCover Letter(s)2007-07-27PDF 29.6 KB
Class II Perm Change letterCover Letter(s)2007-07-27PDF 91.5 KB
Cover Letter Requesting Class II Permissive ChangeCover Letter(s)2007-07-20PDF 9.8 KB
Cover Letter Explaining ChangeCover Letter(s)2005-07-05PDF 49.6 KB
Letter requesting confidentialityCover Letter(s)2001-09-07PDF 3.5 KB
RF exposure exhibitRF Exposure Info2001-09-07PDF 19 KB
Exhibit B Block Diagram per 2 1033 b5 Metadata onlyBlock DiagramPDF 29.6 KB
Exhibit B Schematics per 2 1033 b5 Metadata onlySchematicsPDF 653.5 KB
Exhibit B Operational Description per 2 1033 b4 Metadata onlyOperational DescriptionPDF 896.7 KB

Application Information

Application IDs87fIpx+NeyjrOEPaZBbpQ==
Final Action Date2009-11-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025009739
Model89FC3789
Frequency Range5275-5325 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCanopy 5200G series
Responsible PartyRobert Sarocka, Bob.Sarocka@motorolasolutions.com , 847-344-6075
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is listed in ERP. Only the antenna(s) tested in this filing may be used with the transmitter. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
s87fIpx+NeyjrOEPaZBbpQ==2009-11-10Class II permissive change or modification of presently authorized equipment
asX0iFj6gfyLSbZp6fdRhg==2007-07-27Class II permissive change or modification of presently authorized equipment
U2qhIMnSKt/mujisgut2lg==2007-07-20Class II permissive change or modification of presently authorized equipment
KXnyEWJyamz4cdTb0lYMkw==2005-07-05Class II permissive change or modification of presently authorized equipment
6wk5Y4Ufo/fmIUDw2Ny8Hw==2001-09-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
5275-5325 MHz1.000000025.0000000000ppm15E
5275-5325 MHz1.000000015E
5275-5325 MHz1.000000015END
5275-5325 MHz1.00000002.0000000000ppm20M0F1D15END

Grants

TCB Grant - Application U2qhIMnSKt/mujisgut2lg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 07/20/2007

Application Dated: 07/20/2007
Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
 
Attention: Vincent Spena

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5.2GHz Fixed Wireless Device (UNII)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0  

Power output is listed in ERP. Only the antenna(s) tested in this filing may be used with the transmitter. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application U2qhIMnSKt/mujisgut2lg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 07/20/2007

Application Dated: 07/20/2007
 
Attention: Vincent Spena

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5.2GHz Fixed Wireless Device (UNII)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0  

Power output is listed in ERP. Only the antenna(s) tested in this filing may be used with the transmitter. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA532643

TCB Grant - Application s87fIpx+NeyjrOEPaZBbpQ==

This application does not exist.

EAS Grant - Application s87fIpx+NeyjrOEPaZBbpQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 11/10/2009

Application Dated: 04/06/2009
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Canopy 5200G series
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
ND 15E 5275.0  -  5325.0 1.0 2.0  PM 20M0F1D

Power output is listed in ERP. Only the antenna(s) tested in this filing may be used with the transmitter. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application KXnyEWJyamz4cdTb0lYMkw==

Mail To:
Steve Payne, Senior Staff Engineer
Motorola Canopy
1299 E. Algonquin Rd.
Schaumburg, IL 60196
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 07/05/2005

Application Dated: 07/05/2005
Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Altair WHiSP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0  

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application KXnyEWJyamz4cdTb0lYMkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
  Date of Grant: 07/05/2005

Application Dated: 07/05/2005
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Altair WHiSP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0  

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application asX0iFj6gfyLSbZp6fdRhg==

This application does not exist.

EAS Grant - Application asX0iFj6gfyLSbZp6fdRhg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 07/27/2007

Application Dated: 03/21/2007
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5200xxyzzab
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
ND 15E 5275.0  -  5325.0 1.0  

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This Permissive Change/Modification was originally issued on 07/19/2007.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6wk5Y4Ufo/fmIUDw2Ny8Hw==

Mail To:
Steve Payne, Certification Specialist
Motorola
1301 East Algonquin Rd
Schaumburg, IL 60196
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 09/07/2001

Application Dated: 09/07/2001
Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Altair WHiSP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0 25.0  PM

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 6wk5Y4Ufo/fmIUDw2Ny8Hw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
  Date of Grant: 09/07/2001

Application Dated: 09/07/2001
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FC3789
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Altair WHiSP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5275.0  -  5325.0 1.0 25.0  PM

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a seperation distance of at least 20 cm from all persons and must not be co- located or operating in conjuction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: