FCC ID ABZ89FT7623

Canopy 5400 Fixed Wireless Transceiver

by Motorola Solutions, Inc.

Grantee Code: ABZ   Product Code: 89FT7623
Latest application date: 2010-11-30

FCC ID Device Details

FCC IDABZ89FT7623
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeABZ
Product Code89FT7623
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassCanopy 5400 Fixed Wireless Transceiver
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5495-5705 MHzClass II permissive change or modification of presently authorized equipment2010-11-30
5495-5705 MHzOriginal Equipment2007-07-27

Exhibits

DocumentTypeAvailableFile
Updated Professional install instructionsUsers Manual2010-11-30PDF 1.1 MB
Operations guide pt 1Users Manual2007-07-27PDF 2 MB
Operations guide pt 2aUsers Manual2007-07-27PDF 1.7 MB
Operations guide pt 3aUsers Manual2007-07-27PDF 1.8 MB
Operations guide pt 3bUsers Manual2007-07-27PDF 185 KB
Operations guide pt 3cUsers Manual2007-07-27PDF 652.2 KB
Operations guide pt 3dUsers Manual2007-07-27PDF 607.3 KB
operations guide pt 2Users Manual2007-07-27PDF 1.8 MB
internal photo 1568Internal Photos2007-07-27PDF 1.4 MB
internal photo 1569Internal Photos2007-07-27PDF 1.4 MB
internal photo 1570Internal Photos2007-07-27PDF 1.4 MB
internal photo 1571Internal Photos2007-07-27PDF 1.2 MB
internal photo 1572Internal Photos2007-07-27PDF 1.4 MB
internal photo 1573Internal Photos2007-07-27PDF 1.5 MB
internal photo 1574Internal Photos2007-07-27PDF 1.4 MB
external photoExternal Photos2010-11-30PDF 81.7 KB
External photo 2External Photos2007-07-27PDF 939.2 KB
Fig 134 external photoExternal Photos2007-07-27PDF 805.3 KB
LabelID Label/Location Info2007-07-27PDF 87 KB
Label locationID Label/Location Info2007-07-27PDF 1 MB
setup photo 1Test Setup Photos2007-07-27PDF 206.6 KB
setup photo 2Test Setup Photos2007-07-27PDF 104 KB
setup photo 3Test Setup Photos2007-07-27PDF 104.2 KB
DFS ReportTest Report2010-11-30PDF 995.4 KB
Dish reflector and Lens directorTest Report2010-11-30PDF 789.5 KB
EmissionsTest Report2010-11-30PDF 2.1 MB
TDWR Bandedge Plot1Test Report2010-11-30PDF 148.9 KB
TDWR Bandedge Plot2Test Report2010-11-30PDF 148.3 KB
TDWR Bandedge Plot3Test Report2010-11-30PDF 139.9 KB
TDWR Bandedge plot4Test Report2010-11-30PDF 143.7 KB
Updated test report 75 percent worst caseTest Report2010-11-30PDF 537.8 KB
EMC report pt 1Test Report2007-07-27PDF 1 MB
R66798 FCC reportTest Report2007-07-27PDF 1.1 MB
UNII TEST REPORTTest Report2007-07-27PDF 135.6 KB
TDWR Notch LetterAttestation Statements2010-11-30PDF 13.5 KB
Permissive change modificationCover Letter(s)2010-11-30PDF 10 KB
Agent Authorization letterCover Letter(s)2007-07-27PDF 27.9 KB
Request for ConfidentialityCover Letter(s)2007-07-27PDF 89.9 KB
RF Expsure statementRF Exposure Info2007-07-27PDF 44.8 KB

Application Information

Application IDwlomBKqMZTwDApW/bDzYFA==
Final Action Date2010-11-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025009739
Model89FT7623
Frequency Range5495-5705 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionCanopy 5400 Fixed Wireless Transceiver
Responsible PartyRobert Sarocka, Bob.Sarocka@motorolasolutions.com , 847-344-6075
Technical ContactSteven M. Payne, Motorola (Canopy), spayne1@motorola.com , 224-392-5930
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output is listed in ERP. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wlomBKqMZTwDApW/bDzYFA==2010-11-30Class II permissive change or modification of presently authorized equipment
2CFB02RvQcXvsEks0jO65Q==2007-07-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5495-5705 MHz1.000000015E
5495-5705 MHz1.000000015E41, ND

Grants

TCB Grant - Application wlomBKqMZTwDApW/bDzYFA==

This application does not exist.

EAS Grant - Application wlomBKqMZTwDApW/bDzYFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 11/30/2010

Application Dated: 02/24/2009
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FT7623
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Canopy 5400 Fixed Wireless Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
41 ND 15E 5495.0  -  5705.0 1.0  

Power output is listed in ERP. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


41: Installation of this device must not be readily accessable to human subjects closer than 20 cm.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 2CFB02RvQcXvsEks0jO65Q==

This application does not exist.

EAS Grant - Application 2CFB02RvQcXvsEks0jO65Q==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 07/27/2007

Application Dated: 03/21/2007
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ89FT7623
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 5400xxyyzzab
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5495.0  -  5705.0 1.0  

Power output is listed in ERP. The installation and operating configurations of this transmitter, including any antenna gain and cable loss, must satisfy MPE Categorical Exclusion Requirements of Sec. 2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter. Installers and end-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:
Steve Payne, Certifications Specialist
Motorola
1301 East Algonquin Road
Schaumburg, IL 60196