TCB Grant - Application mdM99N35h5DCHs5Pl4DUZw==
This application does not exist.
EAS Grant - Application mdM99N35h5DCHs5Pl4DUZw==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
|
|
Date of Grant: 09/11/2003
Application Dated: 07/18/2003
|
| |
| Attention: Robert Sarocka |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ABZ99FT3046 |
|
|
| Name of Grantee: |
Motorola Solutions, Inc. |
|
|
| Equipment Class: |
Licensed Non-Broadcast Station Transmitter |
| Notes: |
CM200 VHF 45 Watt Mobile Radio |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
11K0F3E
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
16K0F3E
|
| This application was originally granted on 09/05/2003. |
| Output power is conducted maximum per 90.205(q); nominal conducted output power is 45 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements. |
| BL: |
The output power is continuously variable from the value listed in this entry to 45%-50% of the value listed. |
| Mail To: |
| Donna Tokarz, NPR Coordinator |
| Motorola, Inc. |
| 1309 East Algonquin Road |
| Schaumburg, IL 60196 |
| |
TCB Grant - Application BqqnlA0XdKRz5KTCW2uElQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
|
Date of Grant: 04/26/2006
Application Dated: 04/26/2006
|
| Motorola Solutions, Inc. |
| 2000 Progress Parkway |
Schaumburg, IL 60196
|
| |
| Attention: Robert Sarocka |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ABZ99FT3046 |
|
|
| Name of Grantee: |
Motorola Solutions, Inc. |
|
|
| Equipment Class: |
Licensed Non-Broadcast Station Transmitter |
| Notes: |
CM200 VHF 45 WAT MOBILE RADIO |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
11K0F3E
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
16K0F3E
|
| Output power is conducted maximum per 90.205(q); nominal conducted output power is 45 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements. |
| BL: |
The output power is continuously variable from the value listed in this entry to 45%-50% of the value listed. |
EAS Grant - Application BqqnlA0XdKRz5KTCW2uElQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
|
|
Date of Grant: 04/26/2006
Application Dated: 04/26/2006
|
| |
| Attention: Robert Sarocka |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ABZ99FT3046 |
|
|
| Name of Grantee: |
Motorola Solutions, Inc. |
|
|
| Equipment Class: |
Licensed Non-Broadcast Station Transmitter |
| Notes: |
CM200 VHF 45 WAT MOBILE RADIO |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
11K0F3E
|
| BL |
90.210 |
146.0
-
174.0
|
54.0
|
2.5
PM
|
16K0F3E
|
| Output power is conducted maximum per 90.205(q); nominal conducted output power is 45 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements. |
| BL: |
The output power is continuously variable from the value listed in this entry to 45%-50% of the value listed. |