FCC ID ABZ99FT3086

MotoTRBO 25W Mobile Radio

by Motorola Solutions, Inc.

Grantee Code: ABZ   Product Code: 99FT3086
Latest application date: 2012-06-07

FCC ID Device Details

FCC IDABZ99FT3086
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeABZ
Product Code99FT3086
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassMotoTRBO 25W Mobile Radio

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2012-06-07
2400-2483.5 MHzOriginal Equipment2012-03-01
136-174 MHzOriginal Equipment2012-03-01

Exhibits

DocumentTypeAvailableFile
Install ManualUsers Manual2012-03-01PDF 1.4 MB
RF Safety ManualUsers Manual2012-03-01PDF 4.1 MB
Use rManualUsers Manual2012-03-01PDF 3.5 MB
User ManualUsers Manual2012-03-01PDF 3.5 MB
rf safety manual (rev)Users Manual2012-03-01PDF 945.3 KB
Internal PhotosInternal Photos2012-03-01PDF 418.9 KB
Internal PhotosInternal Photos2012-03-01PDF 421.1 KB
External PhotosExternal Photos2012-03-01PDF 385.5 KB
External PhotosExternal Photos2012-03-01PDF 382.1 KB
ID Label and informationID Label/Location Info2012-03-01PDF 95.3 KB
Label and General InfoID Label/Location Info2012-03-01PDF 102.5 KB
Test SetupTest Setup Photos2012-03-01PDF 100.3 KB
Test setupTest Setup Photos2012-03-01PDF 8.7 KB
Blue Tooth Test ReportTest Report2012-03-01PDF 1.5 MB
Test ReportTest Report2012-03-01PDF 2.5 MB
Certification of DataAttestation Statements2012-03-01PDF 24.9 KB
Certification of DataAttestation Statements2012-03-01PDF 24.9 KB
Cover Letter Requesting addition of the rule part 22Cover Letter(s)2012-06-07PDF 184.5 KB
Add Emission DesignatorsCover Letter(s)2012-03-01PDF 151.2 KB
Cover LetterCover Letter(s)2012-03-01PDF 168.5 KB
Cover Letter (rev)Cover Letter(s)2012-03-01PDF 189.8 KB
Extended Frequency JustificationCover Letter(s)2012-03-01PDF 215.3 KB
Request for ConfidentialityCover Letter(s)2012-03-01PDF 173 KB
Request for ConfidentialityCover Letter(s)2012-03-01PDF 172.1 KB
MPE CaluationsRF Exposure Info2012-03-01PDF 168.1 KB
MPE setup & photoRF Exposure Info2012-03-01PDF 226.9 KB
rf Exposure infoRF Exposure Info2012-03-01PDF 9.3 KB
rf exporsure report appendixRF Exposure Info2012-03-01PDF 1.5 MB
rf exposure reportRF Exposure Info2012-03-01PDF 1.4 MB

Application Information

Application ID5TihXvRYxR9Zbua7HpA+ng==
Final Action Date2012-06-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025009739
Model99FT3086
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionMotoTRBO 25W Mobile Radio
Responsible PartyRobert Sarocka, Bob.Sarocka@motorolasolutions.com , 847-344-6075
Technical ContactLarry D Larsen, Motorola Solutions, Inc., larry.d.larsen@motorlasolutions.com , 847 538 2239
TCB Emailreking@elitetest.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing. Note 1: 16K0F3E, 11K0F3E, 7K60F1E, 7K60F1D, 7K60F1W, 7K60FXE, 7K60FXD Class II permissive change to add rule part 22.

Applications

Application IDDatePurpose
5TihXvRYxR9Zbua7HpA+ng==2012-06-07Class II permissive change or modification of presently authorized equipment
LoqAWF08GJqJ1hc8GGYtsQ==2012-03-01Original Equipment
IpoGBsKnQHhyh8L7xwAG5A==2012-03-01Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-174 MHz25.00000001.5000000000ppmNOTE 122, 74, 80, 90, 90.210(e)BC, EF
136-174 MHz25.00000001.5000000000ppmNOTE 174, 80, 90, 90.210(e)BC, EF
2400-2483.5 MHz0.01500000.5000000000ppm15C

Grants

TCB Grant - Application LoqAWF08GJqJ1hc8GGYtsQ==

This application does not exist.

EAS Grant - Application LoqAWF08GJqJ1hc8GGYtsQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 03/01/2012

Application Dated: 12/10/2011
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT3086
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2400.0  -  2483.5 0.015 0.5  PM

Output power listed is EiRP. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application IpoGBsKnQHhyh8L7xwAG5A==

This application does not exist.

EAS Grant - Application IpoGBsKnQHhyh8L7xwAG5A==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1303 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 03/01/2012

Application Dated: 12/09/2011
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT3086
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Mobile Transmitter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 74, 80, 90, 90.210(e) 136.0  -  174.0 25.0 1.5  PM NOTE 1

Output power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing.

Note 1: 16K0F3E, 11K0F3E, 7K60F1E, 7K60F1D, 7K60F1W, 7K60FXE, 7K60FXD


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

TCB Grant - Application 5TihXvRYxR9Zbua7HpA+ng==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 06/07/2012

Application Dated: 06/07/2012
Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT3086
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MotoTRBO 25W Mobile Radio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 80, 90, 90.210(e) 136.0  -  174.0 25.0 1.5  PM NOTE 1

Output power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing. Note 1: 16K0F3E, 11K0F3E, 7K60F1E, 7K60F1D, 7K60F1W, 7K60FXE, 7K60FXD

Class II permissive change to add rule part 22.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

EAS Grant - Application 5TihXvRYxR9Zbua7HpA+ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
1301 East Algonquin Road
Schaumburg, IL 60196
United States
  Date of Grant: 06/07/2012

Application Dated: 06/07/2012
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT3086
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: MotoTRBO 25W Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC EF 22, 74, 80, 90, 90.210(e) 136.0  -  174.0 25.0 1.5  PM NOTE 1

Output power listed is rated conducted as allowed by 47 CFR 90.205(s). This transmitter must be restricted to work related operations in an Occupational / Controlled RF exposure environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration, and the exposure conditions and/or duration of their passengers and bystanders, to comply with the General Population / Uncontrolled MPE limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Users must be provided with the training information, antenna installation and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide configurations and separation distances as described in this filing. Note 1: 16K0F3E, 11K0F3E, 7K60F1E, 7K60F1D, 7K60F1W, 7K60FXE, 7K60FXD

Class II permissive change to add rule part 22.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
EF: This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization.

Mail To: