FCC ID ABZ99FT4064

CM200/CM300 UHF 40W MOBILE RAD

by Motorola Solutions, Inc.

Grantee Code: ABZ   Product Code: 99FT4064
Latest application date: 2005-12-21

FCC ID Device Details

FCC IDABZ99FT4064
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeABZ
Product Code99FT4064
Applicant BusinessMotorola Solutions, Inc. 🇺🇸
Related Domains motorolasolutions.com
Equipment ClassCM200/CM300 UHF 40W MOBILE RAD
Test FirmMotorola Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
403-440 MHzClass II permissive change or modification of presently authorized equipment2005-12-21
403-440 MHzOriginal Equipment2004-11-03

Exhibits

DocumentTypeAvailableFile
exhibit 08a users guide cm200Users Manual2004-11-03PDF 1 MB
exhibit 08b users guide cm300Users Manual2004-11-03PDF 2.5 MB
exhibit 08c mobile installation manualUsers Manual2004-11-03PDF 1.3 MB
exhibit 08d rf safety bookletUsers Manual2004-11-03PDF 115.3 KB
exhibit 09 internal photosInternal Photos2004-11-03PDF 356.5 KB
exhibit 03 external photosExternal Photos2004-11-03PDF 245.7 KB
exhibit 01 id label general infoID Label/Location Info2004-11-03PDF 95 KB
exhibit 07 test setup procedureTest Setup Photos2004-11-03PDF 160.6 KB
TEST REPORTTest Report2005-12-21PDF 152.2 KB
exhibit 06 test reportTest Report2004-11-03PDF 667.6 KB
exhibit 11b mpe compliance test reportRF Exposure Info2004-11-03PDF 2.8 MB
ATTESTATION STATEMENTAttestation Statements2005-12-21PDF 17 KB
exhibit 02 certification of dataAttestation Statements2004-11-03PDF 84.7 KB
COVER LETTERCover Letter(s)2005-12-21PDF 29.4 KB
Correspondence ReplyCover Letter(s)2004-11-03PDF 35.9 KB
exhibit 00 indexCover Letter(s)2004-11-03PDF 93.1 KB
exhibit 13a cover letterCover Letter(s)2004-11-03PDF 88.7 KB
exhibit 13b request for confidentialityCover Letter(s)2004-11-03PDF 88.7 KB
exhibit 13c request for waiverCover Letter(s)2004-11-03PDF 12.5 KB
Ex11 Amended RF Exp reportRF Exposure Info2004-11-03PDF 321.4 KB
Ex11 SAR Sim 1 of 2RF Exposure Info2004-11-03PDF 485.6 KB
Ex11 SAR Sim 2 of 2RF Exposure Info2004-11-03PDF 1.2 MB
Resp to corrs 27328 and 27329RF Exposure Info2004-11-03PDF 86.8 KB
exhibit 11a rf exposure infoRF Exposure Info2004-11-03PDF 49.6 KB
exhibit 04 circuit descriptions Metadata onlyBlock DiagramPDF 224.7 KB
exhibit 05 schematics Metadata onlySchematicsPDF 333.5 KB
exhibit 12 operational description Metadata onlyOperational DescriptionPDF 109.2 KB
exhibit 10 parts list tuneup info Metadata onlyParts List/Tune Up InfoPDF 636.6 KB

Application Information

Application IDJeV+ehG9orRGQJVuoKFeOQ==
Final Action Date2005-12-21
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025009739
Model99FT4064
Frequency Range403-440 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCM200/CM300 UHF 40W MOBILE RAD
Responsible PartyRobert Sarocka, Bob.Sarocka@motorolasolutions.com , 847-344-6075
Test FirmAlbert Patapack, Motorola Inc., albert.patapack@motorola.com , 847-523-3670
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted maximum per 90.205(r); nominal conducted output power is 40 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements.

Applications

Application IDDatePurpose
JeV+ehG9orRGQJVuoKFeOQ==2005-12-21Class II permissive change or modification of presently authorized equipment
uuuYR5uFo0WeJE2rSbp+HQ==2004-11-03Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
403-440 MHz442.5ppm16K0F3E22, 74, 9BN
403-440 MHz442.5ppm11K0F3E22, 74, 90.21BN

Grants

TCB Grant - Application uuuYR5uFo0WeJE2rSbp+HQ==

This application does not exist.

EAS Grant - Application uuuYR5uFo0WeJE2rSbp+HQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
  Date of Grant: 11/03/2004

Application Dated: 06/18/2004
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4064
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CM200/CM300 UHF 40W Mobile Radio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 74, 90 403.0  -  440.0 44.0 2.5  PM 16K0F3E
BN 22, 74, 90.210 403.0  -  440.0 44.0 2.5  PM 11K0F3E

Output power is conducted maximum per 90.205(r); nominal conducted output power is 40 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements.


BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

TCB Grant - Application JeV+ehG9orRGQJVuoKFeOQ==

Mail To:
Donna Tokarz, NPR Coordinator
Motorola Inc.
1309 East Algonquin Road
Schaumburg, IL 60196
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/21/2005

Application Dated: 12/21/2005
Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4064
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CM200/CM300 UHF 40W MOBILE RAD
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 74, 90 403.0  -  440.0 44.0 2.5  PM 16K0F3E
BN 22, 74, 90.210 403.0  -  440.0 44.0 2.5  PM 11K0F3E

Output power is conducted maximum per 90.205(r); nominal conducted output power is 40 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements.

BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

EAS Grant - Application JeV+ehG9orRGQJVuoKFeOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motorola Solutions, Inc.
2000 Progress Parkway
Schaumburg, IL 60196
United States
  Date of Grant: 12/21/2005

Application Dated: 12/21/2005
 
Attention: Robert Sarocka

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ABZ99FT4064
Name of Grantee:  Motorola Solutions, Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CM200/CM300 UHF 40W MOBILE RAD
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BN 22, 74, 90 403.0  -  440.0 44.0 2.5  PM 16K0F3E
BN 22, 74, 90.210 403.0  -  440.0 44.0 2.5  PM 11K0F3E

Output power is conducted maximum per 90.205(r); nominal conducted output power is 40 W. A waiver of 47 CFR 1.1310 and 2.1091(d) as detailed in this filing was approved. This transmitter is certified to operate with the antennas and installation configurations tested for this filing. This radio must operate in push to talk mode with a duty factor not exceeding 50 % and must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. All qualified end users of this device must receive training, to have the knowledge to control their exposure conditions and/or duration to comply with Occupational /Controlled exposure limit and also have control of the exposure conditions of bystanders for complying with General Population/Uncontrolled exposure limit. A label, as described in this filing, must be displayed on the device and visible to the users to identify the specific training information for meeting the exposure requirements.


BN: The output power is continuously variable from the value listed in this entry to 55%-60% of the value listed.

Mail To: